2.13" 212×104 ePaper Display HAT for Raspberry Pi, three-coloured (red, black, white)

Name: 2.13" 212×104 ePaper Display HAT for Raspberry Pi, three-coloured (red, black, white)
Brand: Waveshare
SKU: 3C-RPI-EINK21
Price: 13.9 EUR
Availability: LimitedAvailability
Rating: 4.333333333333333 (3 reviews)

Product number: 3C-RPI-EINK21

€13.90

Prices incl. VAT plus shipping costs

Available · 4 piece · 1-3 days

Pick your accessory

BerryBase Elektronik Reinigungs-Set für Tastatur, Handy, Kopfhörer, Kameras, 20-teilig

€7.90*

BerryBase Mikrofaser Touchscreen Poliertuch, Display Reinigungstuch, doppellagig, waschbar, 16x16cm

€3.90*

€13.90*

2.13" 212×104 ePaper Display HAT for Raspberry Pi, three-coloured (red, black, white)

Order now and secure 7 Berrys

Our recommendations for you

Product information "2.13" 212×104 ePaper Display HAT for Raspberry Pi, three-coloured (red, black, white)"

Overview

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi 2B/3B/Zero/Zero W
Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

Operating voltage: 3.3V
Interface: SPI, 4-wire SPI
Outline dimension: 65mm × 30.2mm
Display size: 23.71mm × 48.55mm
Dot pitch: 0.229 × 0.228
Resolution: 212 × 104
Display colour: black, red, white
Grey level: 2
Full refresh time: 15s
Refresh power: 26.4mV(typ.)
Standby power: <0.17mV
Viewing angle: >170°

Interface

SYMBOL	DESCRIPTION
VCC	3.3V
GND	Ground
NC GROUND	NC GROUND
DIN PIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, low active

Scope of delivery

2.13inch e-Paper HAT (B)
RPi screws pack (2pcs)
9-pin 2.54 pitch SMD pinheader

Documentation / Downloads

https://www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(B)

Zolltarifnummer:	84733080
Brand:	Waveshare
Compatibility:	Raspberry Pi 3B, Raspberry Pi Zero W, Raspberry Pi Zero
Country of Origin:	China
EAN:	4060137038259
Gross Weight (kg):	0.026
Manufacturer ID:	2.13inch e-Paper HAT (B)
Product ID:	3C-RPI-EINK21

Waveshare

Waveshare: High quality modules for your Raspberry Pi

Waveshare is a reliable specialist when it comes to displays, cameras and other modules for your Raspberry Pi. With the products of the innovative electronics expert, you can turn your computer into a true all-round device.

Waveshare provides an optimal view

You are looking for the ideal display module for your Raspberry Pi? At Berrybase you will find a wide range of products from Waveshare. Each display and all associated modules have been designed with the utmost precision and meet the highest demands - no matter what purpose the respective product is supposed to serve.

For example, the Waveshare ePaper HATs offer perfect conditions if you want a high display quality even in strong sunlight. A big advantage of ePaper displays is their extremely low energy consumption. The best example is the 2.13" 250×122 ePaper Display HAT with integrated controller, which is optimally tailored to the Raspberry Pi 2B, 3B, Zero and Zero W. The communication with this module is done via SPI interface. The ePaper display equipped with the HAT is limited to the colors black and white and reflects light like conventional paper. This is good for the display quality.

If you prefer a display in the three colors red, black and white to complement your Raspberry Pi, the 2.7" 264×176 ePaper Display HAT is recommended. It has the same technical features as the other Waveshare ePaper HATS.

Compact and of brilliant quality: The Waveshare 7 inch Display

The Waveshare 7 inch display, on the other hand, scores not only with its compact design, but also with a 1024x600 hardware resolution and capacitive touch control. On all devices with Raspberry Pi OS, the 7 inch LCD even works driver-free. The integrated 3.5mm jack enables sound output, while the image is produced via an HDMI connection. The impeccable quality manifests itself in a high-quality glass surface with a 6H hardness level.

At Berrybase, you can get the display including a robust case on request - so that it is optimally protected against external influences. Besides the Waveshare 7 inch display, the electronics specialist also has many other screens in different sizes available.

Waveshare Game HAT: Turning your Raspberry Pi into a game console

One of the top sellers at Berrybase is the Waveshare Game HAT for the Raspberry Pi. The controller transforms your computer into a mobile game console. The 3.5" IPS display convinces with a 480×320 resolution and ensures smooth image playback and thus unlimited gaming fun. The sound is reproduced via on-board speakers or optionally via the 3.5 mm jack socket. The battery of the Game HAT is charged via the integrated charging circuit. The module is compatible with the Raspberry Pi models A+, B+, 2B, 3B and 3B+. For other versions the connection via HDMI cable is possible.

If you want to turn your Raspberry Pi into a mobile retro console, we recommend the GamePi43 with a 4.3-inch IPS display, which is suitable for the Raspberry Pi models B+, 2B, 3B and 3B+, or the especially compact GamePi20. The latter features a 2.0-inch IPS display and is compatible with the Raspberry Pi Zero 1.3, Zero W as well as the Zero WH.

Practical accessories for every purpose

By the way: Waveshare's product range is also peppered with useful accessories for your Raspberry Pi. The Li-Ion battery HAT for example provides a mobile power supply for your computer. The 8 channel DIN rail relay module from Waveshare allows you to use your Raspberry Pi as a control module for tech projects in the home, for example to centrally control the home lighting or shutters. And with the Ethernet / USB HUB HAT, Waveshare has designed a module that extends the USB capability of your Raspberry Pi and provides an RJ45 Ethernet port. The latter offers an enormous added value when a stable wired Ethernet connection is required.

Manufacturer information
Waveshare International Limited
2F, World Trade Plaza south side, Fuhong Rd
CN 518033 Futian District, Shenzhen
https://www.waveshare.com
[email protected]

WEEE number: 72769965

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions

Ensure that the device is placed on a non-conductive surface during use to avoid short circuits.
Avoid overvoltage: Check the correct voltage settings of your system.
Keep the product away from moisture, water or other liquids.
Children should only use the product under adult supervision.
When handling GPIO pins, ensure correct wiring to prevent damage to the hardware.
Disconnect the power supply to the Raspberry Pi before manipulating it (e.g. connecting or disconnecting cables).
Avoid direct sunlight or extreme temperatures to prevent damage to the display and electronics.
In the event of a defect, do not repair it yourself, but contact the manufacturer or specialised personnel.
Dispose of in accordance with local regulations for electronic waste.
Dispose of electronic components in an environmentally friendly manner in accordance with WEEE guidelines.

3 of 3 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

Sort by

3 reviews

29 August 2021 00:00

ausreichend groß passt gut zum...

ausreichend groß passt gut zum Pi-Zero

9 October 2018 00:00

Hatte gedacht und erwartet, da...

Hatte gedacht und erwartet, dass sich Waveshare etwas mehr um die aktualität der Treiber bemüht... Stichwort: WiringPi, bcm2835 & und Kernel (z.B. V4.14) Schade...

13 August 2018 00:00