3.5" display for Raspberry Pi with resistive touchscreen

Product number: RPI-35LCD BerryBase

3.5" display for Raspberry Pi with resistive touchscreen

4.0 (11 Reviews)

€14.90

Available · 75 piece · 1-3 days

Housing for Raspberry Pi 3 / 3B+ and 3.5" display, black

€3.90

Housing for Raspberry Pi 4 and 3.5" display, black

€5.90

3.5" display for Raspberry Pi with resistive touchscreen

€14.90

Order now and secure 30 Berrys

Product information "3.5" display for Raspberry Pi with resistive touchscreen"

Characteristics

320x480 resolution
Resistive touchscreen
Display with LED backlight
Directly attachable to all Raspberry Pi models
Image, touchscreen and power supply via GPIO
Supported operating systems: Raspbian, Ubuntu, etc.
Display has the same size as the Raspberry Pi

Specifications

LCD Interface: SPI
Touch screen type: Resistive
Touch Screen Controller: XPT2046
Backlight: LED
Resolution: 320 x 480 pixels
Aspect ratio: 8:5

Pin assignment (GPIO interface)

PIN NO.	SYMBOL	DESCRIPTION
1, 17	3.3V	Power positive (3.3V power input)
2, 4	5V	Power positive (5V power input)
3, 5, 7, 8, 10, 12, 13, 15, 16	NC	NC INPUT
6, 9, 14, 20, 25	GND	Ground
11	TP_IRQ	Touch Panel interrupt, low level while the Touch Panel detects touching
18	LCD_RS	Instruction/Data Register selection
19	LCD_SI / TP_SI	SPI data input of LCD/Touch Panel
21	TP_SO	SPI data output of Touch Panel
22	RST	Reset
23	LCD_SCK / TP_SCK	SPI clock of LCD/Touch Panel
24	LCD_CS	LCD chip selection, low active
26	TP_CS	Touch Panel chip selection, low active

Scope of delivery

Display
Touch pen

Software installation
The installation of the drivers under Raspbian are identical to those for displays from the manufacturer Waveshare.

Zolltarifnummer:	85312095
Brand:	BerryBase
Compatibility:	Raspberry Pi 5, Raspberry Pi 4B, Raspberry Pi 3B+, Raspberry Pi 3B, Raspberry Pi 3A+
Country of Origin:	China
Display Size:	3,5 Zoll
EAN:	4251266702658
Gross Weight (kg):	0.005
Manufacturer ID:	RPI-35LCD
Product ID:	RPI-35LCD

BerryBase

BerryBase – the maker shop's own brand

Under the BerryBase name we carry products that we have selected, tested and added to our range ourselves. Behind this is the aim of offering makers exactly what is really needed in projects: solid quality, fair value for money and components that fit together.

The own brand grew out of our daily work with Raspberry Pi, Arduino and the like. Where standard products leave gaps, we fill them with our own items – from enclosures, cables and adapters to sensors and development boards.

If you buy BerryBase, you buy with our experience behind you: we know the products, use them ourselves and back them up with support and advice. That way an idea turns into a finished project faster.

Manufacturer information
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]

WEEE number: 83795550

Person responsible for the EU
See manufacturer information

Safety instructions

Ensure that the device is placed on a non-conductive surface during use to avoid short circuits.
Avoid overvoltage: Check the correct voltage settings of your system.
Keep the product away from moisture, water or other liquids.
Children should only use the product under adult supervision.
When handling GPIO pins, ensure correct wiring to prevent damage to the hardware.
Disconnect the power supply to the Raspberry Pi before manipulating it (e.g. connecting or disconnecting cables).
Avoid direct sunlight or extreme temperatures to prevent damage to the display and electronics.
In the event of a defect, do not repair it yourself, but contact the manufacturer or specialised personnel.
Dispose of in accordance with local regulations for electronic waste.
Dispose of electronic components in an environmentally friendly manner in accordance with WEEE guidelines.

11 of 11 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

Sort by

1 - 10 of 11 reviews

17 January 2026 23:22

Funktioniert

Ich hab das recht planlos bestellt und hab das Display zum Laufen gebracht. Ich bin mir aber nicht sicher was genau das hier für ein Modell ist. Ich hab es mit einem Raspberry 2 mit Trixie zum laufen gebracht. Hatte mit diesen Waveshare Treibern rumgefummelt, aber am Ende brauchte man davon 0.

Die Zeile in der config.txt die bei mir funktionierte (restliche Zeilen in der Waveshare Anleitung)
dtoverlay=piscreen,speed=16000000,rotate=270,driver=ili9486,bgr=1

(piscreen ist einfach bei trixie dabei, braucht man kein fbcp , nix ..)

Zusammenfassend : geht nicht out-of-the-box , aber man muss keine software installieren , nur config files schubsen.

14 September 2023 19:43

Nur für Raspberry 3!

Leider nach mehreren Stunden probieren nicht zum Laufen gebracht. Die Treiber für dieses Display sind so alt, dass die auf einem Raspberry Pi 4 B gar nicht erst funktionieren und bei der Treiberinstallation sofort das OS schrotten und unbrauchbar machen.

25 December 2022 00:00

16 December 2022 00:00

Funktioniert, aber Touchscreen...

Funktioniert, aber Touchscreen X-Y-Achsen (immer noch) vertauscht. Man tippt rechts unten, der Touch wird aber links oben ausgeführt. Bekanntes Problem bei den Displays.

9 May 2022 00:00