4.2" 400×300 ePaper Display Modul mit SPI Interface, dreifarbig (rot, schwarz, weiß)

  • 3C-EINKM-42
  • 34.90€ *

    including VAT plus shipping costs

    Available immediately
    41 piece · 1 - 3 working days

    The article cannot be placed in the shopping cart, as max. 1 Raspberry Pi per customer is allowed.

    Notice

    Attention:

    Versandkostenfrei innerhalb Deutschlands

    Versandkostenfrei ab 29€

    Bestellungen ab 29€ Warenwert sind bei uns generell Versandkostenfrei bei Lieferung innerhalb Deutschlands.

    Frequently Bought Together
    4.2" 400×300 ePaper Display Modul mit SPI
    4.2" 400×300 ePaper Display Modul mit SPI Interface, dreifarbig (rot, schwarz, weiß)
    34.90€
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
       
    1.90€
    Kupferlitze isoliert, 1x0,14mm, 10m black
    Kupferlitze isoliert, 1x0,14mm, 10m black
       
    1.31€
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17.70€
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
       
    4.90€
    =
    Total:
    60.71€*
    VAT included. including shipping costs
    Frequently Bought Together
    4.2" 400×300 ePaper Display Modul mit SPI
    4.2" 400×300 ePaper Display Modul mit SPI Interface, dreifarbig (rot, schwarz, weiß)
    34.90€
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
    Kupferschaltdraht, isoliert, ø0,5mm, 10m black
       
    1.90€
    Kupferlitze isoliert, 1x0,14mm, 10m black
    Kupferlitze isoliert, 1x0,14mm, 10m black
       
    1.31€
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17.70€
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
       
    4.90€
    =
    Total:
    60.71€*
    VAT included. including shipping costs
    Übersicht This is an E-Ink display module, 4.2inch, 400x300 resolution, with... more
    "4.2" 400×300 ePaper Display Modul mit SPI Interface, dreifarbig (rot, schwarz, weiß)"
    Übersicht

    This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

    Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Spezifikationen
    • Operating voltage: 3.3V
    • Interface: 3-wire SPI, 4-wire SPI
    • Outline dimension: 103.0mm × 78.5mm
    • Display size: 84.8mm × 63.6mm
    • Dot pitch: 0.212 × 0.212
    • Resolution: 400 × 300
    • Display color: red, black, white
    • Grey level: 2
    • Full refresh time: 15s
    • Refresh power: 26.4mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°

    Interface

    SYMBOL DESCRIPTION
    VCC 3.3V
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active


    Lieferumfang
    • 4.2inch e-Paper Module (B)
    • PH2.0 20cm 8Pin

    Dokumentation / Downloads
    Related links to "4.2" 400×300 ePaper Display Modul mit SPI Interface, dreifarbig (rot, schwarz, weiß)"
    Data "4.2" 400×300 ePaper Display Modul mit SPI Interface, dreifarbig (rot, schwarz, weiß)"
    Order number: 3C-EINKM-42
    Gross weight (in kg): 0.078
    Manufacturer: Waveshare
    Manufacturer Number: 4.2inch e-Paper Module (B)
    HS-Code: 84733080
    Country of origin: China
    Read, write and discuss reviews... more
    Customer evaluation for "4.2" 400×300 ePaper Display Modul mit SPI Interface, dreifarbig (rot, schwarz, weiß)"
    Write an evaluation
    Evaluations will be activated after verification.
    Please enter these characters in the following text field.

    The fields marked with * are required.

    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Content 10 Meter (0.19€ * / 1 Meter)
    1.90€ *
    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Content 10 Meter (0.13€ * / 1 Meter)
    1.31€ *
    Viewed

    Switch to the appropriate shop now

    We have established that you are not in Germany and that we can offer you better shipping conditions in our shop for your location.