Adafruit 12mm Diffuse Thin Digital RGB LED Pixel (strand of 25)

Name: Adafruit 12mm Diffuse Thin Digital RGB LED Pixel (strand of 25)
Brand: Adafruit
SKU: ADA322
Price: 37.9 EUR
Availability: LimitedAvailability

Product number: ADA322

€37.90

Prices incl. VAT plus shipping costs

Available · 20 piece · 1-3 days

€37.90*

Adafruit 12mm Diffuse Thin Digital RGB LED Pixel (strand of 25)

Order now and secure 19 Berrys

Our recommendations for you

Product information "Adafruit 12mm Diffuse Thin Digital RGB LED Pixel (strand of 25)"

RGB pixels are digitally controllable lights that you can set to any colour or animate. Each RGB LED and each controller chip is moulded into a silicone "dot". The dots are weatherproof and robust. There are four flanges moulded in so you can 'push' them into a 12mm drill hole in any material up to 1.5mm/0.06" thick. They are typically used to make outdoor signs. We also have flat pixels which are essentially the same but are not as long and thin.

The pixels are connected via a 4-wire cable. +5V (red), ground (blue), data (yellow) and clock (green). The data is shifted down from one pixel to the next, so that you can easily cut off the strand or add more to the end. Each dot is digitally controlled, with an internal 8-bit PWM LED driver (24-bit colour for 16 million different hues). The pixels need to be clocked by a microcontroller, we have linked a sample code below that works on an Arduino, it should be easy to adapt to any other microcontroller.

The pixels use 8mm diffuse RGB LEDs, with a 120 degree beam width. The total maximum brightness of all LEDs is about 1600mcd, but with the light more evenly distributed & blended than a clear LED. (Please note: mcd ratings of LEDs are notoriously inflated by most LED sellers, so be extra-sceptical when checking LED reviews)

Sold by the strand, each strand has 25 pixels in series! Each strand has two JST SM 4 pin connectors so you can connect multiple strands in a row, as many as you want, just be careful how much current you want. We have now spliced LED pixel strands with the power wires (red & blue) so it's really easy to connect 5VDC in with a 2.1mm jack adapter. We have a 5V/2A supply that should be able to drive 2 or more strings and a 5V/10A supply that can drive up to 160 LEDs all lit at once

If you want to connect the string (to wire it to power and a microcontroller), you could cut and solder the wires, but better yet, just grab a 4-JST harness - then check the LED modules, to see which direction the input is (there are arrows there showing the data direction)

You can control these with an Arduino using any two microcontroller digital pins, check out this library which also includes example code to demonstrate the strings and be sure to read our very detailed tutorial on how to use them!

Zolltarifnummer:	85414100
Brand:	Adafruit
Country of Origin:	China
EAN:	5904422330781
Gross Weight (kg):	0.166
Manufacturer ID:	322
Product ID:	ADA322

Adafruit

Adafruit: The expert for open source hardware

For more than ten years, programmers and tinkerers have benefited from the expertise of the Adafruit brand. Whether for beginners or proven experts, Adafruit has the right hardware components ready for your next IoT project.

Light comes into the dark with Adafruit NeoPixel

One extremely popular product line from the company's broad portfolio is Adafruit NeoPixel. These nifty LED components come in a wide variety of designs and color temperatures. NeoPixel modules are available, for example, in the form of a practical stick with five intelligent LEDs in red, green and blue (RGB) or in white (W), as a shield with 40 eye-saving RGBW LEDs in which all pixels are individually addressable, and as a jewel with seven RGBW LEDs that can be controlled with 8-bit PWM per channel.

Especially popular is the Adafruit NeoPixel Ring with 16 ultra-bright, intelligent RGB LEDs including integrated drivers, which you only need a single microcontroller to control. The trick is that the Adafruit NeoPixel rings form a chain, so to speak: You couple the output pin of one with the input pin of the other.

With the Adafruit NeoPixel products you can realize a wide variety of projects - there are virtually no limits to your creativity. With the help of an Arduino, a jumper cable and the appropriate software, you can control a NeoPixel ring individually and light up the small LEDs as you wish - either individually or in a specific combination. This way, you can also create your own Vu meter with the versatile LED components. Practical: To make programming Adafruit NeoPixel easier, Adafruit provides an Arduino library as well as a Python library.

Adafruit Feather Boards: Powerful hardware in a compact format

With Adafruit Feather, the hardware specialist from the States also has various powerful development boards in its range, which are essentially equivalent to an Arduino in terms of function. All of these boards are equipped with similar features; among other things, the pin assignment is the same and there are also many parallels when it comes to the microcontrollers and the battery charging properties. In addition, you can also find Feather boards with special devices like Bluetooth, Wi-Fi and cellular network connectivity as well as boards with microSD slot in Adafruit's product range. The name "Feather" is no coincidence: The boards are also characterized by being particularly compact and, above all, lightweight.

The range of top-class product highlights is wide: The STM32F405 Feather, for example, is the fastest CircuitPython board from Adafruit with an outstanding 168 MHz and meets the highest demands. It is equipped with a STEMMA QT / Qwiic port at the end, which makes it easy to connect to I2C sensors. The Adafruit Feather nRF52840 Express, on the other hand, shines with Bluetooth Low Energy and can also be used with CircuitPython thanks to native USB support.

Another important part of Adafruit's portfolio are the FeatherWings. With these expansion modules, you can also include components such as a display or a motor driver in your IoT project. The FeatherWing Proto is a proven classic in Adafruit's portfolio. This is ideally suited as a prototyping add-on for all Feather boards. The Adafruit FeatherWing Wing Tripler Mini Kit, on the other hand, is ideal if you want to connect a Feather to two other FeatherWings at the same time.

With the Adafruit MIDI FeatherWing Kit you get a music capable FeatherWing, thanks to which you can equip your Feather with MIDI input and output jacks. And with the Adafruit FeatherWing OLED you can easily add a small OLED display to your Feather board - no soldering required.

Adafruit: What's behind the brand

As an expert in open-source hardware, Adafruit has long since established itself in the electronics industry. The company was founded in 2005 by Limor Fried. At the time, the talented and innovative electrical engineer was still a student at the renowned Massachusetts Institute of Technology (MIT). To this day, Fried is CEO of the electronics giant, which is now headquartered in New York. The company's name also goes back to its founder: Fried was once known on the World Wide Web by the nickname "Ladyada" - a tribute to the famous IT pioneer Ada Lovelace.

Adafruit says it is committed to getting more people excited about technology and science - and thanks to its first-class products, the hardware expert from the USA is sure to succeed!

Manufacturer information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
[email protected]

WEEE number: 20453810

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions

Do not expose to direct contact with water or moisture, as this can lead to short circuits.
Only use with the specified operating voltage and power to avoid damage or overheating.
Do not touch the LED module during operation as the surfaces may become hot.
Observe the polarity when connecting to avoid malfunctions.
Keep the module away from children to prevent injury or damage.
Do not use in potentially explosive atmospheres unless the product is certified for this purpose.
Switch off the power supply before cleaning or servicing.
Dispose of defective or damaged modules properly as electronic waste.
Do not carry out any modifications or repairs yourself, as this may cause malfunctions or hazards.
Do not point the LED light directly into the eyes to avoid eye damage.