Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi

Product number: ADA4567

€21.90

Currently not available

Notify me when the item is available.

Privacy

By selecting continue you confirm that you have read our and accepted our .

€21.90

Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi

Order now and secure 11 Berrys

Product information "Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi"

If you're looking for a bright, easy-to-read OLED display for a Raspberry Pi (most likely a Pi Zero) project, this could be just the thing for you!

The Adafruit 2.23" Monochrome OLED Bonnet for Raspberry Pi is a nifty OLED buddy, that can be plugged onto any Raspberry Pi to create a vibrant display. The Bonnet comes with a monochrome OLED with a diagonal of 2.13" and 128x32 pixels, with sharp white pixels. The OLED has the I2C pins plus GPIO #4 for reset, so you have plenty of GPIO connections available for buttons, LEDs, sensors, etc. It sits nice and flat so in many enclosures that have an open top, this display can be used.

Compared to the similar PiOLED display, this OLED has the same resolution but is much larger so it can be read from across the room. This screen consists of 128x32 individual white OLED pixels and as the display generates its own light, no backlight is required. This reduces the power required to run the OLED and is the reason why the display has such high contrast; we really like OLED displays for their sharpness!

Using the display is very simple, we have a Python library for the SSD1305 chipset. With our sample code you can use the Python imaging library to draw images, text or whatever you want . Our tests showed 30 FPS refresh rates, so you can make animations or simple videos.

Comes fully pre-assembled and tested, so all you need to do is plug it in and install our Python code! Works with any Raspberry Pi computer that has a 2x20 connector, such as the Pi B+, Pi 2, Pi 3, Pi 4 and Pi Zero (and any others that have a 2x20 connector!)

On the bottom is a Qwiic/STEMMA QT connector for I2C sensors and devices, so you can connect and play any of our STEMMA QT devices.

Please note that OLED displays are made up of hundreds of...OLEDs! This means that each pixel is a small organic LED, and if left on for over 1000 hours it will start to dim. If you want to keep the display uniformly bright, please turn off the display (switch off the pixels) when it is not needed to keep them from dimming.

Check out the GitHub repo for our Python library, which includes examples and instructions.

Zolltarifnummer:	85429000
Brand:	Adafruit
Compatibility:	Raspberry Pi 5, Raspberry Pi 4B, Raspberry Pi 3B+, Raspberry Pi Zero WH, Raspberry Pi 3B, Raspberry Pi 3A+, Raspberry Pi Zero W, Raspberry Pi Zero
Country of Origin:	USA
EAN:	5904422327118
Gross Weight (kg):	0.016
Manufacturer ID:	4567
Product ID:	ADA4567

Adafruit

Adafruit: The expert for open source hardware

For more than ten years, programmers and tinkerers have benefited from the expertise of the Adafruit brand. Whether for beginners or proven experts, Adafruit has the right hardware components ready for your next IoT project.

Light comes into the dark with Adafruit NeoPixel

One extremely popular product line from the company's broad portfolio is Adafruit NeoPixel. These nifty LED components come in a wide variety of designs and color temperatures. NeoPixel modules are available, for example, in the form of a practical stick with five intelligent LEDs in red, green and blue (RGB) or in white (W), as a shield with 40 eye-saving RGBW LEDs in which all pixels are individually addressable, and as a jewel with seven RGBW LEDs that can be controlled with 8-bit PWM per channel.

Especially popular is the Adafruit NeoPixel Ring with 16 ultra-bright, intelligent RGB LEDs including integrated drivers, which you only need a single microcontroller to control. The trick is that the Adafruit NeoPixel rings form a chain, so to speak: You couple the output pin of one with the input pin of the other.

With the Adafruit NeoPixel products you can realize a wide variety of projects - there are virtually no limits to your creativity. With the help of an Arduino, a jumper cable and the appropriate software, you can control a NeoPixel ring individually and light up the small LEDs as you wish - either individually or in a specific combination. This way, you can also create your own Vu meter with the versatile LED components. Practical: To make programming Adafruit NeoPixel easier, Adafruit provides an Arduino library as well as a Python library.

Adafruit Feather Boards: Powerful hardware in a compact format

With Adafruit Feather, the hardware specialist from the States also has various powerful development boards in its range, which are essentially equivalent to an Arduino in terms of function. All of these boards are equipped with similar features; among other things, the pin assignment is the same and there are also many parallels when it comes to the microcontrollers and the battery charging properties. In addition, you can also find Feather boards with special devices like Bluetooth, Wi-Fi and cellular network connectivity as well as boards with microSD slot in Adafruit's product range. The name "Feather" is no coincidence: The boards are also characterized by being particularly compact and, above all, lightweight.

The range of top-class product highlights is wide: The STM32F405 Feather, for example, is the fastest CircuitPython board from Adafruit with an outstanding 168 MHz and meets the highest demands. It is equipped with a STEMMA QT / Qwiic port at the end, which makes it easy to connect to I2C sensors. The Adafruit Feather nRF52840 Express, on the other hand, shines with Bluetooth Low Energy and can also be used with CircuitPython thanks to native USB support.

Another important part of Adafruit's portfolio are the FeatherWings. With these expansion modules, you can also include components such as a display or a motor driver in your IoT project. The FeatherWing Proto is a proven classic in Adafruit's portfolio. This is ideally suited as a prototyping add-on for all Feather boards. The Adafruit FeatherWing Wing Tripler Mini Kit, on the other hand, is ideal if you want to connect a Feather to two other FeatherWings at the same time.

With the Adafruit MIDI FeatherWing Kit you get a music capable FeatherWing, thanks to which you can equip your Feather with MIDI input and output jacks. And with the Adafruit FeatherWing OLED you can easily add a small OLED display to your Feather board - no soldering required.

Adafruit: What's behind the brand

As an expert in open-source hardware, Adafruit has long since established itself in the electronics industry. The company was founded in 2005 by Limor Fried. At the time, the talented and innovative electrical engineer was still a student at the renowned Massachusetts Institute of Technology (MIT). To this day, Fried is CEO of the electronics giant, which is now headquartered in New York. The company's name also goes back to its founder: Fried was once known on the World Wide Web by the nickname "Ladyada" - a tribute to the famous IT pioneer Ada Lovelace.

Adafruit says it is committed to getting more people excited about technology and science - and thanks to its first-class products, the hardware expert from the USA is sure to succeed!

Manufacturer information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
[email protected]

WEEE number: 20453810

Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions

Ensure that the device is placed on a non-conductive surface during use to avoid short circuits.
Avoid overvoltage: Check the correct voltage settings of your system.
Keep the product away from moisture, water or other liquids.
Children should only use the product under adult supervision.
When handling GPIO pins, ensure correct wiring to prevent damage to the hardware.
Disconnect the power supply to the Raspberry Pi before manipulating it (e.g. connecting or disconnecting cables).
Avoid direct sunlight or extreme temperatures to prevent damage to the display and electronics.
In the event of a defect, do not repair it yourself, but contact the manufacturer or specialised personnel.
Dispose of in accordance with local regulations for electronic waste.
Dispose of electronic components in an environmentally friendly manner in accordance with WEEE guidelines.