2 Reviews

Adafruit HUZZAH32 ESP32 Feather Board, mounted with stacking headers

Product number: ADA3619

Varianten:

Adafruit HUZZAH32 Feather Board with ESP32

€24.15

Available · 10 piece · 1-3 days

Pick your accessory

Pin header kit for Feather, 12-pin and 16-pin socket connectors

€1.05

€24.15

Adafruit HUZZAH32 ESP32 Feather Board, mounted with stacking headers

Order now and secure 13 Berrys

Product information "Adafruit HUZZAH32 ESP32 Feather Board, mounted with stacking headers"

The HUZZAH32 is an ESP32-based Feather made with the official WROOM32 module. It has everything that makes Feather: built-in USB-to-serial converter, automatic bootloader reset, lithium-ion/polymer charger and pretty much all the GPIOs so you can use it with any FeatherWing. And this version has the headers already soldered in. This version is already assembled with stacking headers.

The module embedded at the end of this Feather contains a dual-core ESP32 chip, 4MB of SPI flash, a tuned antenna and all the passive components you need to take advantage of this powerful new processor. The ESP32 has both WLAN and Bluetooth Classic/LE support. This means it's perfect for pretty much any wireless or internet connected project.

The ESP32 is a perfect upgrade from the ESP8266 that was so popular. In comparison, the ESP32 has many more GPIO, many analogue inputs, two analogue outputs, several additional peripherals (such as a spare UART), two cores so you don't have to give way to the WiFi manager, a much faster processor, etc.! etc! We think that as the ESP32 becomes more common, more and more people will switch exclusively to this chip, as it is so feature rich.

Here are specifications from Espressif about the ESP32:

240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
Integrated 520 KB SRAM
Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
Integrated dual mode Bluetooth (classic and BLE)
4 MByte Flash included on the WROOM32 module
Built-in PCB antenna
Ultra-low noise analogue amplifier
Hall sensor
10x capacitive touch interface
32 kHz crystal oscillator
3 x UARTs (only two are configured by default in the Feather Arduino IDE support, one UART is used for bootloading/debug)
3 x SPI (only one is configured by default in Feather Arduino IDE support)
2 x I2C (only one is configured in Feather Arduino IDE support by default)
12 x ADC input channels
2 x I2S audio
2 x DAC
PWM/timer input/output available on each GPIO pin
OpenOCD debug interface with 32 kB TRAX buffer
SDIO Master/Slave 50 MHz
SD card interface support

Comes fully assembled and tested, with a USB interface that lets you quickly use it with the Arduino IDE or the low-level ESP32 IDF.
Lipoly battery and USB cable not included

Check out the Adafruit tutorial for documentation, pinouts, schematics, fritzing objects, Arduino setup and more!

Zolltarifnummer:	85423119
Brand:	Adafruit
Country of Origin:	USA
EAN:	4060137061714
Gross Weight (kg):	0.010
Manufacturer ID:	3619
Product ID:	ADA3619

Adafruit

Adafruit: The expert for open source hardware

For more than ten years, programmers and tinkerers have benefited from the expertise of the Adafruit brand. Whether for beginners or proven experts, Adafruit has the right hardware components ready for your next IoT project.

Light comes into the dark with Adafruit NeoPixel

One extremely popular product line from the company's broad portfolio is Adafruit NeoPixel. These nifty LED components come in a wide variety of designs and color temperatures. NeoPixel modules are available, for example, in the form of a practical stick with five intelligent LEDs in red, green and blue (RGB) or in white (W), as a shield with 40 eye-saving RGBW LEDs in which all pixels are individually addressable, and as a jewel with seven RGBW LEDs that can be controlled with 8-bit PWM per channel.

Especially popular is the Adafruit NeoPixel Ring with 16 ultra-bright, intelligent RGB LEDs including integrated drivers, which you only need a single microcontroller to control. The trick is that the Adafruit NeoPixel rings form a chain, so to speak: You couple the output pin of one with the input pin of the other.

With the Adafruit NeoPixel products you can realize a wide variety of projects - there are virtually no limits to your creativity. With the help of an Arduino, a jumper cable and the appropriate software, you can control a NeoPixel ring individually and light up the small LEDs as you wish - either individually or in a specific combination. This way, you can also create your own Vu meter with the versatile LED components. Practical: To make programming Adafruit NeoPixel easier, Adafruit provides an Arduino library as well as a Python library.

Adafruit Feather Boards: Powerful hardware in a compact format

With Adafruit Feather, the hardware specialist from the States also has various powerful development boards in its range, which are essentially equivalent to an Arduino in terms of function. All of these boards are equipped with similar features; among other things, the pin assignment is the same and there are also many parallels when it comes to the microcontrollers and the battery charging properties. In addition, you can also find Feather boards with special devices like Bluetooth, Wi-Fi and cellular network connectivity as well as boards with microSD slot in Adafruit's product range. The name "Feather" is no coincidence: The boards are also characterized by being particularly compact and, above all, lightweight.

The range of top-class product highlights is wide: The STM32F405 Feather, for example, is the fastest CircuitPython board from Adafruit with an outstanding 168 MHz and meets the highest demands. It is equipped with a STEMMA QT / Qwiic port at the end, which makes it easy to connect to I2C sensors. The Adafruit Feather nRF52840 Express, on the other hand, shines with Bluetooth Low Energy and can also be used with CircuitPython thanks to native USB support.

Another important part of Adafruit's portfolio are the FeatherWings. With these expansion modules, you can also include components such as a display or a motor driver in your IoT project. The FeatherWing Proto is a proven classic in Adafruit's portfolio. This is ideally suited as a prototyping add-on for all Feather boards. The Adafruit FeatherWing Wing Tripler Mini Kit, on the other hand, is ideal if you want to connect a Feather to two other FeatherWings at the same time.

With the Adafruit MIDI FeatherWing Kit you get a music capable FeatherWing, thanks to which you can equip your Feather with MIDI input and output jacks. And with the Adafruit FeatherWing OLED you can easily add a small OLED display to your Feather board - no soldering required.

Adafruit: What's behind the brand

As an expert in open-source hardware, Adafruit has long since established itself in the electronics industry. The company was founded in 2005 by Limor Fried. At the time, the talented and innovative electrical engineer was still a student at the renowned Massachusetts Institute of Technology (MIT). To this day, Fried is CEO of the electronics giant, which is now headquartered in New York. The company's name also goes back to its founder: Fried was once known on the World Wide Web by the nickname "Ladyada" - a tribute to the famous IT pioneer Ada Lovelace.

Adafruit says it is committed to getting more people excited about technology and science - and thanks to its first-class products, the hardware expert from the USA is sure to succeed!

Manufacturer information
Adafruit Industries, LLC
168 39th Street 1905CC
US 11232 Brooklyn, New York
https://www.adafruit.com
[email protected]

WEEE number: 20453810

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions

Only use the product in suitable environments and in accordance with the technical specifications.
Avoid contact with water, moisture or extreme temperatures.
Always disconnect the power supply before working on the circuit.
Do not operate in the vicinity of flammable substances.
Only use with compatible power sources and components to avoid damage.
Do not use if there is visible damage or malfunction.
Do not carry out any unauthorised modifications or repairs.
Avoid electrostatic discharges, always work earthed.
Dispose of in accordance with local regulations for electronic waste.
Do not dispose of in household waste, but dispose of at appropriate collection points.