Arduino Pro Mini 328, 5V/16MHz

Name: Arduino Pro Mini 328, 5V/16MHz
Brand: SparkFun
SKU: DEV-11113
Price: 11.9 EUR
Availability: LimitedAvailability
Rating: 5.0 (1 reviews)

Product number: DEV-11113

€11.90

Order now and
secure 6 Berrys

Prices incl. VAT plus shipping costs

Varianten

Arduino Pro Mini 328, 3.3V/8MHz

1 Review

Available · 4 piece · 1-3 days

Check quantity

Available immediately

4 piece : 1-3 days

4.96/5 customer reviews for BerryBase

Free shipping from 79€*

Support

Wird oft zusammengekauft

Product information "Arduino Pro Mini 328, 5V/16MHz"

It's blue! It is thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. The Arduino Pro Mini does not come with assembled connectors, so you can solder in any connector or wire with any orientation. We recommend that Arduino beginners start with the Uno R3. It's a great board to get you started quickly. The Arduino Pro series is for users who understand the limitations of the system voltage (5V), lack of connectors and USB outside the board.

We really wanted to minimise the cost of an Arduino. To achieve this, we used all SMD components, made it dual layer, etc. This board connects directly to the FTDI Basic Breakout Board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable, but the FTDI cable does not bring out the DTR pin, so the auto-reset function will not work. There is a voltage regulator on board so it can accept a voltage up to 12VDC. If you power the board with unregulated voltage, make sure you connect it to the "RAW" pin and not VCC.

The latest and greatest version of this board breaks out the ADC6 and ADC7 pins and adds footprints for optional I2C pull-up resistors! We've also taken the opportunity to put the OSHW logo on it.

Note: A portion of this sale goes back to Arduino LLC to fund further development of new tools and new IDE features.

Features:

ATmega328 runs at 16MHz with external resonator (0.5% tolerance)
0.8mm thin board
USB connector outside the board
Supports auto-reset
5V regulator
Max. 150mA output
Overcurrent protection
Weighs less than 2 grams!
DC input 5V to 12V
Power and status LEDs on the circuit board
Analogue pins: 8
Digital I/Os: 14
0.7x1.3" (18x33mm)

Documents:

Zolltarifnummer:	85423111
Brand:	SparkFun
Country of Origin:	USA
EAN:	5903351240673
Gross Weight (kg):	0.002
Manufacturer ID:	DEV-11113
Product ID:	DEV-11113

Manufacturer information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
[email protected]

WEEE number: 17968585

Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions

Only work in a dry environment and avoid contact with liquids.
Avoid direct skin contact with components during operation to prevent burns.
Only connect the board to the specified power source; overloading can cause damage.
Only use the board with compatible devices to avoid malfunctions.
Keep all connection cables tidy and avoid short circuits.
Do not operate unattended in the vicinity of highly flammable materials.
Do not make any changes to the circuits when the appliance is switched on.
Dispose of the product in accordance with the electronic waste regulations of your region.
Dispose of used or defective components at special collection points for electronic waste.
Protect the board from static discharges to prevent malfunctions.

1 of 1 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

Sort by

1 review

6 December 2022 00:00

Ähnliche Artikel

Arduino Pro Mini 328, 3.3V/8MHz

Arduino Pro Mini 328, 3.3V/8MHz The Arduino Pro Mini is a minimalist design from SparkFun for Arduino. This is a 3.3V Arduino with an 8MHz bootloader. The board comes without pre-installed pin headers so that individual connectors or wires can be soldered in. It is ideal for experienced users who are familiar with the limitations of the system voltage and the lack of connectors and USB outside the board. Features at a glance ATmega328 runs at 8MHz 3.3V operating voltage Supports auto-reset Power and status LEDs on the board USB connector outside the board Technical specifications Operating voltage: 3.3V DC input: 3.3V to 12V Analogue pins: 8 Digital I/O pins: 14 Max. Output: 150mA Dimensions: 18x33mm Weight: less than 2 grams Low-voltage board, no interface circuit to 3.3V devices required Supports FTDI basic breakout board and auto-reset 0.8mm thin board Other data External resonator with 0.5% tolerance Overcurrent protection OSHW logo Scope of delivery 1x Arduino Pro Mini 328 Documentation: Circuit diagram Eagle files Tutorial for the first steps Graphical data sheet GitHub

€11.50

Available · 1 piece · 1-3 days

Arduino Pro Mini 328, 3.3V/8MHz

DEV-11114

€11.50

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

Cutsomers also bought

433Mhz transmitter & receiver super regeneration module FS1000A XY-FST XY-MK-5V

With this set it is possible to switch 433Mhz devices such as radio-controlled sockets, e.g. with the Raspberry Pi. The modules have been tested under pilight and can be used for this purpose without any problems. Both modules can also be operated on a plug-in board (not included) thanks to the pin pitch of 2.54mm. Technical data transmitter / transmitter XY-FST Operating voltage: 3.5 - 12V DC Range: 20 - 200m (depending on the operating voltage) Operating mode: AM Transmission rate: 4KB / s Transmission power: 10mW Transmission frequency: 433Mhz Dimensions: 19 x 19mm Pin assignment: Data, VCC, ground (from left to right) Technical data receiver XY-MK-5V Operating voltage: 5V DC Receiving frequency: 433Mhz Sensitivity: -105dB Dimensions: 30 x 14mm Please note that we cannot guarantee the accuracy of this data! Scope of delivery: 1x 433Mhz XY-FST Transmitter 1x 433Mhz XY-MK-5V Receiver / Receiver

€1.90

Available · 100+ piece · 1-3 days

433Mhz transmitter & receiver super regeneration module FS1000A XY-FST XY-MK-5V

FS1000A

€1.90

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

Breadboard with 830 contacts

Breadboard with 830 contacts This breadboard enables simple circuits to be built quickly and supports experimental projects in electronics and electrical engineering. It is made of high-quality ABS plastic and has 830 contacts. The dimensions are 165 x 55mm with a grid of 2.54mm. It has double-sided adhesive tape on the back for easy mounting and latches on the sides to connect multiple boards. Features at a glance 830 contacts - Offers extensive connection options for components. Pitch: 2.54mm - Standard dimension for compatible plug-in options. Mounting: Double-sided adhesive tape - Simple and stable mounting. Technical data Number of contacts: 830 Dimensions: 165 x 55mm Grid dimension: 2.54mm Material: ABS plastic Mounting option: Double-sided adhesive tape on the back Can be plugged together: Latches for connecting several boards Scope of delivery 1 x breadboard with 830 contacts

€1.90

Available · 82 piece · 1-3 days

Breadboard with 830 contacts

BB-830P

€1.90

Available · 82 piece · 1-3 days

Prices incl. VAT plus shipping costs

40pin Jumper / Dupont cable set, 1x each F-F / M-M / F-M, 10cm

Jumper/Dupont cable set - Quick and easy connection for electronics The Jumper/Dupont cable set is the ideal solution for anyone looking for a reliable and flexible connection option for their electronics projects. Consisting of three different cable types - female-female, male-male and female-male - this set not only offers adaptability through the 40 separable wires of each cable, but also the precision that modern microcontroller projects require. With a standardised 2.54 mm pin spacing and high-quality AWG 28 copper inner conductors, this cable set enables efficient signal transmission. It is perfect for use with Raspberry Pi, Arduino and other microcontrollers to connect them to breadboards, sensors and modules, among others. Features at a glance Compatibility: Perfectly suited for Raspberry Pi, Arduino and other microcontrollers. Various cable types: Includes female-female, male-male, and female-male cables. Flexibility: Each of the cables can be split into 40 individual wires, which opens up a wide range of possible uses. Versatile for prototyping and development projects. Enables the connection of microcontrollers with breadboards, sensors, modules, etc. Technical data 3 cable types: Female-Female, Male-Male, Female-Male Each cable has 40 cores Cores can be separated Pin spacing: 2.54mm (pitch) Inner conductor: AWG 28 copper Length: 10cm Scope of delivery 3x Jumper / Dupont cable (10cm): 1x female-female 1x male-male 1x female-male

€4.40

Available · 27 piece · 1-3 days

40pin Jumper / Dupont cable set, 1x each F-F / M-M / F-M, 10cm

DUPK-SET-10

€4.40

Available · 27 piece · 1-3 days

Prices incl. VAT plus shipping costs

Adafruit CP2102N Friend - USB to Serial Converter

The days of parallel and serial connections are long gone. Now the USB connection has the upper hand! But USB is heavy, and you just want to transfer your everyday serial data from a microcontroller to a computer. What now? Here comes the Adafruit CP2102N Friend! The CP2102N is very similar to the CP2104. Although it has a name with a lower number, it is considered the successor to the CP2104. Compared to the CP2104, the CP2102N: Transfer data at a higher speed: the CP2104 has a maximum transfer rate of 2Mbps, the CP2102N of 3Mbps reprogramme the internal settings: The CP2104 has a one-time programmable memory and the CP2102N has a reprogrammable settings memory. 99% of people don't use this feature, but it's there if you need it. The CP2102N is better than the CP2012 (without N) as it has the same RS-485 and GPIO support as the CP2104. You can find more details in the SiLabs CP2104 to CP2102N migration guide. We have also updated this breakout from our CP2104 Friend so that it now has USB C instead of Micro B. Otherwise, it's drop-in compatible and works anywhere you use the CP2104 to upload firmware to microcontrollers. It's a high-quality CP2102N USB serial chip that can upload code at 3Mbps for fast development. It also has an auto-reset for Arduino/ATmega328 boards, so you don't have to fiddle with pins and press reset buttons. The CP2102N has better driver support than the CH340 and can handle very high speeds and variable speeds without stability issues. Compared to the FT232RL and FT231X, the CP2102N has the same or even better capabilities - and at an affordable price! It even has RX/TX LEDs to help you debug your data: They flash when the chip is receiving or sending data. By default, we've set it up to match our FTDI cables. The 6th pin is RTS, the power line is +5V and the signal levels are 3.3V (they are 5V compatible and should work in most 3.3V and 5V signalling systems). Works great with any Arduino, ESP8266, ESP32 or other microcontroller that uses an "FTDI port" for communication and upload. You can also buy a 6-pin extension cable from us to switch the order of the cables. You will also find a complete collection of all modem control pins on the site if you need the DTR, RI, DSR, etc. pins. Pins. The article is supplied with a fully assembled and tested circuit board. You will receive a right-angled female header and some male headers. You can solder in the female header at the edge to make it "FTDI-like" or solder in the male headers to plug it into a breadboard and get access to all pins. You do not need a driver for Linux. For Windows, the driver is automatically downloaded from Windows Update. For Mac OS X, you can search for the latest and best drivers on the SiLabs driver page. Technical data CP210x USB to UART Bridge VCP Driver Serial communication guide for the CP210x more data

€6.55

Available · 12 piece · 1-3 days

Adafruit CP2102N Friend - USB to Serial Converter

ADA5335

€6.55

Available · 12 piece · 1-3 days

Prices incl. VAT plus shipping costs

Adafruit vibrating mini motor disc

*BZZZZZZZZZZZZ* Can you feel that? That's the little whirring motor, and for any project with haptic feedback, you should get a few. These vibe motors are tiny discs that are completely sealed so they are easy to use and embed. Two wires are used to control/power the vibe motor. Simply connect it to a battery or microcontroller pin (red is positive, blue is negative) and it will start humming. The rated voltage is 2.5 to 3.8V and for many projects we have found that it vibrates from 2V up to 5V, higher voltages result in higher current draw but also stronger vibration. If you want to reduce the current draw/strength (e.g. to control it directly from an Arduino pin), try connecting a resistor (100 to 1000 ohms) in series. For full power control, a small PN2222 transistor can easily control a motor, a little experimentation may be required!

€2.15

Available · 3 piece · 1-3 days

Adafruit vibrating mini motor disc

ADA1201

€2.15

Available · 3 piece · 1-3 days

Prices incl. VAT plus shipping costs

1N4001 - Rectifier diode, THT, 50V, 1A, DO41

1N4001 - Rectifier diode, THT, 50V, 1A, DO41 This rectifier diode is suitable for through-hole mounting (THT) and supports a maximum reverse voltage of 50V with a forward current of 1A. Thanks to its robust design in the DO41 housing and high performance with a maximum forward current of 5.4A, it is ideal for a wide range of applications in electronics. Features at a glanceHigh reliability: maximum forward current load of 5.4A and pulse current capacity of 30A.Energy efficiency: minimum forward voltage of only 1.1V reduces energy losses. Technical specifications Diode type: Rectifier Mounting: THT Maximum reverse voltage: 50V Forward current: 1A Forward current max.: 5.4A Semiconductor structure: single diode Max. pulse current: 30A Housing: DO41 Forward voltage max.: 1.1V Leakage current: 50µA Standby time: 1.5µs Other data Ideally suited for high-frequency applications and energy conversion Scope of delivery 1x 1N4001 rectifier diode

€0.08

Available · 100+ piece · 1-3 days

1N4001 - Rectifier diode, THT, 50V, 1A, DO41

1N4001

€0.08

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

BC547B - Bipolar transistor, NPN, 45V, 100mA, TO-92, 3-pin

BC547B - Bipolar NPN transistor, 45V, 100mA, TO-92 The BC547B is a bipolar NPN transistor in a TO-92 housing designed for amplification applications in electronics. With a collector-emitter voltage of 45V and a current of 100mA, it is ideal for circuits up to 500mW power dissipation. The transistor gain is between 200 and 450, ideal for frequencies up to 100MHz. Features at a glance Polarity: NPN, supports efficient bipolar circuits. Performance: Can handle power dissipation of up to 500mW. Versatility: Suitable for frequencies up to 100MHz and amplification applications. Technical specifications Transistor type: NPN Polarisation: bipolar Collector-emitter voltage: 45V Collector-emitter current: 100mA Power dissipation: 500mW Package: TO92 Transistor gain: 200...450 Mounting: THT Frequency: 100MHz Scope of delivery 1x BC547B Bipolar NPN transistor, TO-92 housing

€0.11

Available · 100+ piece · 1-3 days

BC547B - Bipolar transistor, NPN, 45V, 100mA, TO-92, 3-pin

BC547B

€0.11

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

Metal film resistor, 1.0 kOhm, 0.6W, ±1%, 0207, axial, through-hole mounting

Metal film resistor, 1.0 kOhm, 0.6W, ±1%, 0207, axial, through-hole mounting A precise metal film resistor with 0.6W power and a tolerance of ±1%. This resistor is designed for through-hole mounting (THT) and offers a maximum operating voltage of 350V. With its axial wiring and compact housing dimensions, it is ideal for use in a wide range of electronic applications. Features at a glance High precision: Offers a tolerance of ±1% for reliable performance. Compact dimensions: Housing dimensions of Ø2.4x6.3mm and output dimensions of Ø0.55x28mm facilitate integration into circuits. Technical specifications Resistor type: Metal film resistor Mounting: THT (through-hole mounting) Resistance: 1 kOhm Power: 0.6W Tolerance: ±1% Max. Operating voltage: 350V Housing dimensions: Ø2.4 x 6.3mm Output dimensions: Ø0.55 x 28mm Temperature coefficient: 50ppm/°C Outputs: axial Scope of delivery Metal film resistor, 1.0 kOhm

€0.06

Available · 100+ piece · 1-3 days

Metal film resistor, 1.0 kOhm, 0.6W, ±1%, 0207, axial, through-hole mounting

MSW1K0.6

€0.06

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

Analogue 2-axis joystick module with select button

2-axis joystick module with analogue outputs and a select button (centre button). Can also be operated with the Raspbery Pi together with an MCP3008. Technical data 5V operating voltage 2 axes (x, y) Operating LED Connections accessible via pin header (RM 2.54mm) Pin assignment: - =Ground +=5V operating voltage B=Button output X=Output for X-axis Y=Output for Y-axis Board dimensions: approx. 40.10 x 26.05 mm (without pin header) Diameter of mounting holes: 3.1 mm Scope of delivery Joystick module rubberised navigation cap

€1.55

Available · 20 piece · 1-3 days

Analogue 2-axis joystick module with select button

JYSM-1

€1.55

Available · 20 piece · 1-3 days

Prices incl. VAT plus shipping costs

Breadboard with 400 contacts

Breadboard with 400 contacts This breadboard makes it possible to quickly build simple, on-the-fly circuits. It can be extended by stringing several units together. The use of ABS plastic and the latches on the sides allow flexible and stable assembly. Features at a glance Enables quick and easy assembly of flying circuits. Several boards can be connected using the latches on the sides. Technical data Contacts: 400 Dimensions: 83 x 55 mm Grid: 2.54 mm Material: ABS plastic Fastening: Double-sided adhesive tape on the back Scope of delivery 1x breadboard with 400 contacts

€1.50

Available · 100+ piece · 1-3 days

Breadboard with 400 contacts

BB-400P

€1.50

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

Battery clip for 9V blocks, I-shape, plastic version

Battery clip for 9 V blocks, I-shapePlastic version- Dimensions: 28 x 14.5 mm- Cable length: 150 mm- Plastic battery clip for 9 V block- AWG 29- Insulation: PVC- RoHS-compliant

€0.27

Available · 16 piece · 1-3 days

Battery clip for 9V blocks, I-shape, plastic version

Battery clip for 9 V blocks, I-shapePlastic version- Dimensions: 28 x 14.5 mm- Cable length: 150 mm- Plastic battery clip for 9 V block- AWG 29- Insulation: PVC- RoHS-compliant

11445

€0.27

Available · 16 piece · 1-3 days

Prices incl. VAT plus shipping costs

More Products from +++ SparkFun +++ to look at

SparkFun Micro OLED Breakout, 64x48 pixels, Qwiic, I2C, 10mA, addressable, 3.3V

€21.90

Currently not available

Details

SparkFun Micro OLED Breakout, 64x48 pixels, Qwiic, I2C, 10mA, addressable, 3.3V

SparkFun Micro OLED Breakout (Qwiic) The SparkFun Qwiic Micro OLED Breakout is a Qwiic-compatible version of the popular Micro OLED display! The small, monochrome, blue-on-black OLED screen provides incredibly clear images for your viewing pleasure. Despite its "micro" size, a surprisingly large amount of graphics can be displayed. This breakout is perfect for adding graphics to your next project and displaying diagnostic information without having to resort to serial output, all with the ease of use of the Qwiic Connect system! Features at a glance Monochrome, blue-on-black OLED display, 64x48 pixels. Two Qwiic connectors for easy I2C operations without soldering. Integrated 4.7kΩ pull-up resistors and selectable I2C address. two mounting holes and a practical Qwiic cable holder integrated in a removable tab on the board I2C pull-up jumper and ADDR jumper on the back of the board Technical data 2x Qwiic connections Operating voltage: 3.3V Operating current: 10mA (max. 20mA) Screen size: 64x48 pixels (0.66" diagonal) Interface: I2C I2C Selectable I2C address: 0x3D (standard), 0x3C (alternative) Dimensions: 1.08" x 1.17" Other data Note: A multiplexer/mux is required for communication with several Micro OLED sensors via a single bus. The Qwiic Mux Breakout is suitable for use with more than one Micro OLED sensor. Scope of delivery 1x SparkFun Micro OLED Breakout (Qwiic) Guide

LCD-22495

€21.90

Currently not available

Prices incl. VAT plus shipping costs

Details

SparkFun USB C Breakout Horizontal, VBUS, GND, CC1, CC2, D+, D-, SHLD Pins, Pitch Header, 1.5A - 3A

€5.90

Currently not available

Details

SparkFun USB C Breakout Horizontal, VBUS, GND, CC1, CC2, D+, D-, SHLD Pins, Pitch Header, 1.5A - 3A

This USB breakout lets you add a USB-C connector to your projects without having to solder on every tiny SMD pad. The SparkFun USB-C Breakout delivers up to three times more power than previous USB iterations and also solves the commonly frustrating dilemma of properly plugging in a USB cable because it's reversible! This board breaks out the VBUS, GND, CC1, CC2, D+ and D- pins of the USB-C connector into a 0.1-inch pitch header, delivering up to a nominal 1.5A of current and up to 3A depending on the upstream device. Features: Dimensions: 22.1mm x 14mm x 4.9mm (0.87in x 0.55in x 0.19in) Weight: 1.35g Documents: Schematic Eagle files USB Type C General Datasheet USB connector data sheet Github

BOB-15100

€5.90

Currently not available

Prices incl. VAT plus shipping costs

Details

Addressable WS2812 RGB LED, PTH, 5mm, clear, pack of 5

€4.10

Currently not available

Details

Addressable WS2812 RGB LED, PTH, 5mm, clear, pack of 5

Addressable WS2812 RGB LED, PTH, 5mm, clear, pack of 5 We know this looks like many of our other LEDs, but it's not! This is a PTH addressable RGB LED with a WS2812 (or "NeoPixel") control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it's much easier to solder into your project and comes in a clear 5mm package. With this RGB LED, the control IC has been moved into the actual LED so we wanted to bring you this amazing product! They are great if you need a lot of colour in a small board space, now more than ever. If you are looking for a great addressable LED in a common LED form factor, then this is the perfect choice for you. Features at a glance Form factor and mounting: Clear 5mm PTH version, easier to solder than SMD versions. Integrated control: Control IC WS2812 is built directly into the LED, provides RGB colour control. Application: Ideal for projects that require intense colours in a small space. Technical data: Power supply Power supply: DC 4.5V - 6V Internal frequency: 800kHz Transmission type: Single Wire Single Transmission Scope of delivery 5x PTH Addressable RGB LEDs Links Connection manual Data sheet Product video Get Started with the WS2812 Hookup Guide Note Supplied in packs of 5.

COM-12999

€4.10

Currently not available

Prices incl. VAT plus shipping costs

Details

Addressable WS2812 RGB LED, PTH, 5mm, diffuse, 5-pack

€4.15

Currently not available

Details

Addressable WS2812 RGB LED, PTH, 5mm, diffuse, 5-pack

Addressable WS2812 RGB LED, PTH, 5mm, diffuse, pack of 5 We know these look like many of our other LEDs, but they're not! These are PTH addressable RGB LEDs with a WS2812 (or "NeoPixel") control IC built right into them. This PTH version is incredibly similar to its SMD cousin, except it's much easier to solder into your project and is in a diffuse 5mm package. With this RGB LED, the control IC has been moved into the actual LED so we wanted to bring you this amazing product! They are great if you need a lot of colour in a small board space, now more than ever. If you are looking for a great addressable LED in a common LED form factor, then this is the perfect choice for you. Features at a glance Simplicity: Easier to solder with PTH design compared to SMD. Lots of colour, little space: Ideal for compact designs that require vibrant colours. Integrated control: WS2812 control IC integrated for addressable colour changes. Technical specifications Power supply: DC 4.5V - 6V Internal frequency: 800kHz Transmission type: Single wire single transmission Scope of delivery 5x RGB Addressable LED, PTH, 5mm, Diffused Links Connection manual Data sheet Get Started with the WS2812 Hookup Guide Hookup Guide Supplied in packs of 5.

COM-12986

€4.15

Currently not available

Prices incl. VAT plus shipping costs

Details

Addressable WS2812 RGB LED, PTH, 8mm, diffuse, pack of 5

€4.20

Available · 30 piece · 1-3 days

Addressable WS2812 RGB LED, PTH, 8mm, diffuse, pack of 5

We know this one looks like many of our other LEDs, but it's not! This is a PTH addressable RGB LED with a WS2812 (or "NeoPixel") control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it's much easier to solder into your project and is in a diffuse 8mm package. With this RGB LED, the control IC has been moved into the actual LED, so we wanted to bring you this amazing product! They are great if you need a lot of colour in a small amount of board space, now more than ever. If you are looking for a great addressable LED in a common LED form factor, then this is the perfect choice for you. Note: Supplied in packs of 5. Get Started with the WS2812 Hookup Guide Features: Power supply: DC 4.5V - 6V Internal frequency: 800K Hz Single wire single transmission Documents: Connection manual Data sheet Product video

COM-12877

€4.20

Available · 30 piece · 1-3 days

Prices incl. VAT plus shipping costs

Antennen- / Stativ-Gewindeadapter - 1/4 Zoll auf 5/8 Zoll

€6.55

Available · 15 piece · 1-3 days

Antennen- / Stativ-Gewindeadapter - 1/4 Zoll auf 5/8 Zoll

Dieser Aluminiumadapter konvertiert das weit verbreitete 1/4"-Gewinde von Kamera-Drei- und Einbeinstativen in das 5/8"-11-TPI-Gewinde (Gewinde pro Zoll) von hochwertigen Vermessungsantennen und -geräten. Er ist ideal für die Montage von RTK-Vermessungsantennen auf einem Einbeinstativ oder Dreibeinstativ.

PRT-17546

€6.55

Available · 15 piece · 1-3 days

Prices incl. VAT plus shipping costs

Arduino Pro Mini 328, 3.3V/8MHz

€11.50

Available · 1 piece · 1-3 days

Arduino Pro Mini 328, 3.3V/8MHz

DEV-11114

€11.50

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

AVR Programming Cable

€2.50

Currently not available

Details

AVR Programming Cable

This is a practical AVR programming cable that contains both the 10-pin and 6-pin ISP programming interface. The cable is approx. 12" long and fits with pins on 1/10in centres.

CAB-09215

€2.50

Currently not available

Prices incl. VAT plus shipping costs

Details

Battery holder for 3x Mignon AA with cover and switch, JST connector

€1.80

Available · 10 piece · 1-3 days

Battery holder for 3x Mignon AA with cover and switch, JST connector

This 3xAA battery holder adds the finishing touch to your battery-powered project. This holder features a removable, sliding cover and an ON/OFF switch that allows you to control the power supply for your project. The 6" (~150mm) cable is terminated with a JST connector. Note: Please note that JST connectors are not suitable for constant and repeated unplugging and plugging and may wear out over time.

PRT-18769

€1.80

Available · 10 piece · 1-3 days

Prices incl. VAT plus shipping costs

Breadboard to JST-GHR-06V cable - 6-pin, 1.25mm pitch

€1.90

Currently not available

Details

Breadboard to JST-GHR-06V cable - 6-pin, 1.25mm pitch

Breadboard to JST-GHR-06V Cable - 6-Pin, 1.25mm Pitch This is a handy cable to connect a six-pin lockable GHR-06V connector to breadboard-friendly connector pins. The cable is equipped with a 1.25 mm pitch locking GHR-06V-JST connector as found on some sensors, radios and other small devices. Features at a glance Six-pin GHR-06V type locking connector 1.25mm pitch for precise connections Ideal for sensors, radios and small devices Technical Specifications Wire type: 28 AWG 1.25mm pitch Contact resistance: 10 Ohm Insulator resistance: 5 MOhm High dielectric strength: DC 300V for 0.01 sec. Cable type: UL1571 28AWG Cable jacket: 80P PVC Cable colours: black, brown, red, yellow, green, blue Cable length: 165mm Scope of delivery 1x breadboard to JST-GHR-06V cable, 6-pin, 1.25mm pitch Links Datasheet

CAB-18079

€1.90

Currently not available

Prices incl. VAT plus shipping costs

Details

Breakout board for XBee modules

€4.15

Currently not available

Details

Breakout board for XBee modules

This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee onto a two row header with 0.1" standard spacing. The spacing between the 0.1" connectors is 0.5" so the board is DIP friendly. We strongly recommend using the female headers to avoid having to permanently solder the XBee to the breakout board. This is the board only. Please order the corresponding 2mm sockets (you need 2!) and 0.1" pin headers as well. Documents: Circuit diagram Eagle files 5V interface to 3V XBee module X-CTU software GitHub (design files)

BOB-08276

€4.15

Currently not available

Prices incl. VAT plus shipping costs

Details

Capacitive fingerprint scanner, AS-108M

€25.60

Currently not available

Details

Capacitive fingerprint scanner, AS-108M

Fingerprint scanners have been readily available at the consumer level for several years now, so it's only logical that they continue to grow and evolve over time. That's what brings us to this capacitive fingerprint scanner from ADH-Tech. The AS-108M fingerprint sensor module is a combination fingerprint scanner and MCU that provides a UART interface for easy functionality. The AS-108M stands out from other fingerprint scanners in that it reads the image of a fingerprint by pixel array and provides ridge or valley signals to the A/D converter and digital processor and then to the serial peripheral interface to read the data. The on-board MCU uses a fingerprint algorithm that allows you to use MCU-SOC commands via UART to operate modules such as fingerprint reading, match operations and more. The AS-108M offers an image resolution of 508dpi, a recognition time of less than 0.6 seconds and can store up to 100 high-quality templates. Unlike other fingerprint scanners, this version comes with an interface cable with a 6-pin connector output that plugs into the connection port for easy setup and installation. Includes: 1x Capacitive fingerprint scanner - AS-108M 1x interface cable 1x interface cable connector Features: 160x160 pixels Built-in ADC for image digitisation UART interface Data encryption Short readout time Documents: Data sheet User manual of the module Connector specifications Cable description

SEN-17151

€25.60

Currently not available

Prices incl. VAT plus shipping costs

Details

Conductive thread, 12m, smooth, stainless steel

€5.90

Currently not available

Details

Conductive thread, 12m, smooth, stainless steel

This is 12 metres of smooth, conductive thread spun from stainless steel fibres and wound onto a plastic bobbin. You can use it to sew all your e-textile projects. This small spool is a great way to get into wearable electronics without the expense of buying a whole spool of thread. Almost 40 feet of thread is enough to sew a simple design onto your shirt, backpack or hat. What sets this thread apart from the other conductive threads we carry is the fact that it is actually spun from 12UM stainless steel fibres, making it incredibly smooth and without the loose hairs seen in other spools. This means that while it's not easy to solder because it's stainless, it also won't burn if you touch it with a soldering iron. Suitable for hand and machine sewing (as bobbin thread). We had no problems using it for tight joins, but if you are worried, you should treat the thread with wax to keep it manageable! Features: Material: 12UM stainless steel fibre Weight per gram:0.2458g/m Thickness:2.8KGF Diameter(mm):0.12 Resistance (?/m) : 27 12m per spool (on plastic spools)

DEV-13814

€5.90

Currently not available

Prices incl. VAT plus shipping costs

Details

Conductive thread, 30ft / approx. 9m, stainless steel

€4.70

Available · 1 piece · 1-3 days

Conductive thread, 30ft / approx. 9m, stainless steel

This is a 30 foot long conductive thread spun from stainless steel fibres and wound onto a plastic bobbin. You can use it to sew all your e-textile projects. This small spool is a great way to get into wearable electronics without the expense of buying a whole spool of thread. 30 feet of thread is enough to sew a simple design onto your shirt, backpack or hat. What sets this thread apart from the other conductive threads we carry is the fact that it is spun from this stainless steel fibre and does not have a nylon core. This means that although it is not easy to solder because it is stainless, it will not burn if you touch it with a soldering iron. It's suitable for hand or machine sewing (as a bobbin thread) and is particularly 'toothy', meaning it clings firmly to the fabric - if you've had problems with slippery conductive threads that won't lay flat or knot, this thread will be a welcome remedy. We've had no problems using it for tight, firm joins, but if you're worried, waxing the thread should ensure it stays manageable! Features: Made from stainless steel fibres Resistance: 28 Ohm/Ft

DEV-10867

€4.70

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

Copper adhesive tape, 5mm, 15m

€4.20

Available · 84 piece · 1-3 days

Copper adhesive tape, 5mm, 15m

Copper tape has countless applications in electronics, from making flat traces for electrical components to RF shielding and antenna construction. Copper tape is even used to connect things with solder, such as the stained glass on Tiffany lamps.This copper tape has an adhesive backing, is 5mm wide and comes in rolls of 15m.Thickness: 3 mil

PRT-10561

€4.20

Available · 84 piece · 1-3 days

Prices incl. VAT plus shipping costs

Copper adhesive tape, conductive adhesive, 5mm, 15m

€6.50

Available · 35 piece · 1-3 days

Copper adhesive tape, conductive adhesive, 5mm, 15m

Copper tape has countless applications in electronics, from making flat traces for electrical components to RF shielding and antenna construction. Copper tape is even used to connect things with solder, such as the coloured glass on Tiffany lamps. This copper tape has a conductive adhesive, is 5 mm wide and comes in rolls of 15 metres. Perfect for more precise projects. Documents: Data sheet [MSDS](https://cdn.sparkfun.com/datasheets/Prototyping/Copper foil tape MSDS-EN.pdf)

PRT-13827

€6.50

Available · 35 piece · 1-3 days

Prices incl. VAT plus shipping costs

Day of the Geek Badge, Löt-Kit, schwarz

€9.50

Available · 2 piece · 1-3 days

Day of the Geek Badge, Löt-Kit, schwarz

Der Tag der Toten findet nur einmal im Jahr statt, aber was wäre, wenn du ihn an jedem beliebigen Tag feiern könntest? Mit dieser schwarzen Version des Day of the Geek Lötbausatzes kannst du die Grundlagen des Lötens erlernen, indem du ein leuchtendes Schädelabzeichen zusammenbaust! Jedes Day of the Geek-Kit braucht etwa 5-10 Minuten, um es mit einfachen Lötmaterialien (nicht im Lieferumfang enthalten) zusammenzubauen. Sag nein zu Zuckerschädeln und sag stattdessen ja zu Lötschädeln! Jedes Day of the Geek Soldering Badge Kit enthält eine schwarze Schädelplatine, einen CR2032-Batteriehalter, einen Pin-Back und drei Paar farbige LEDs, damit du die Wahl zwischen roten, weißen oder blauen Augen hast. Alles, was du (neben einem Lötkolben und Lötzinn) brauchst, ist eine CR2032 Knopfzellenbatterie, denn die ist nicht enthalten, um den Versand zu erleichtern. Wegen der unterschiedlichen Vorwärtsspannungen und Stromaufnahme solltest du die LED-Farben nicht mischen. Verwende nur rot mit rot, weiß mit weiß und blau mit blau. Einen fröhlichen Dia de los Muertos euch allen! Hinweis: Da es sich bei diesem Produkt um einen Bausatz handelt, sind Montage und Grundkenntnisse im Löten erforderlich. Das Day of the Geek Badge wird nicht vormontiert geliefert. Bestandteil: 1x Schwarze Totenkopf-Platine 2x Rote LEDs 2x Blaue LEDs 2x weiße LEDs 1x CR2032 Batteriehalter 1x Pin hinten Dokumente: Assembly Guide

KIT-20118

€9.50

Available · 2 piece · 1-3 days

Prices incl. VAT plus shipping costs

Day of the Geek Badge, Löt-Kit, weiß

€9.50

Available · 10 piece · 1-3 days

Day of the Geek Badge, Löt-Kit, weiß

Der Tag der Toten findet nur einmal im Jahr statt, aber was wäre, wenn du ihn an jedem beliebigen Tag feiern könntest? Mit dieser weißen Version des Day of the Geek Lötbausatzes kannst du die Grundlagen des Lötens erlernen, indem du ein leuchtendes Schädelabzeichen zusammenbaust! Jedes Day of the Geek-Kit braucht etwa 5-10 Minuten, um es mit einfachen Lötmaterialien (nicht im Lieferumfang enthalten) zusammenzubauen. Sag nein zu Zuckerschädeln und sag stattdessen ja zu Lötschädeln! Jedes Day of the Geek Soldering Badge Kit enthält eine weißé Schädelplatine, einen CR2032-Batteriehalter, einen Pin-Back und drei Paar farbige LEDs, damit du die Wahl zwischen roten, weißen oder blauen Augen hast. Alles, was du (neben einem Lötkolben und Lötzinn) brauchst, ist eine CR2032 Knopfzellenbatterie, denn die ist nicht enthalten, um den Versand zu erleichtern. Wegen der unterschiedlichen Vorwärtsspannungen und Stromaufnahme solltest du die LED-Farben nicht mischen. Verwende nur rot mit rot, weiß mit weiß und blau mit blau. Einen fröhlichen Dia de los Muertos euch allen! Hinweis: Da es sich bei diesem Produkt um einen Bausatz handelt, sind Montage und Grundkenntnisse im Löten erforderlich. Das Day of the Geek Badge wird nicht vormontiert geliefert. Bestandteil: 1x Weiße Totenkopf-Platine 2x Rote LEDs 2x Blaue LEDs 2x weiße LEDs 1x CR2032 Batteriehalter 1x Pin hinten Dokumente: Assembly Guide

KIT-20119

€9.50

Available · 10 piece · 1-3 days

Prices incl. VAT plus shipping costs

Digital Voltmeter Ammeter 30V 10A Red and Blue

€6.55

Available · 1 piece · 1-3 days

Digital Voltmeter Ammeter 30V 10A Red and Blue

While a DMM is suitable for a quick check, a panel-mounted current and voltage meter is handy if you need to constantly monitor a system. Battery-powered systems can be quickly diagnosed by checking the overall system voltage; run times can be calculated based on instantaneous power consumption rates. For all these cases and more, it's just super handy to have a meter at hand. This digital combination DC current and voltage meter measures up to 30 V and 10 A at a quiescent current of about 15 mA. All devices are supplied pre-calibrated, but can be further calibrated after installation with a small trimpot on the back of the device. The wiring diagram shows normal cabling. The thicker 2-pin harness is for the ammeter and is normally wired into the current feedback path to the battery or ground. The thinner 3-pin harness is for the voltmeter. The black wire of the 3-pin harness is internally connected to the ammeter and can be wired to NC (not connected) or ground. The red wire of the ammeter should be connected to the system and the black wire of the ammeter should be connected to ground, otherwise the system will work but the meter will display 0.00 as it cannot display negative values. Features: Dimensions Bevel: 48 x 29 x 3mm Base: 19 x 44.5 x 25.7mm Cut-out: 46 x 27mm Max. Current: 10A Max. Voltage: 30V Accuracy Current: ±1% Voltage: ±0.1% Quiescent: 15mA avg

TOL-18374

€6.55

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

Disposable surface EMG/ECG/EKG electrodes, 24 mm, pack of 10

€10.65

Currently not available

Details

Disposable surface EMG/ECG/EKG electrodes, 24 mm, pack of 10

This is a pack of 10 Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG. These small pads are perfect for short-term monitoring of neurofeedback and biofeedback purposes. They are single-use and very handy thanks to the integrated, latex-free gel. Each pad adheres very well to the skin and the snap-on connector can be easily slid onto or removed from the electrode lead. Note: This product is NOT a medical device and is not intended to be used as such or as an accessory to such a device. Features: 24mm x 1mm 4 mm connection Documents: Data sheet Product video

SEN-12969

€10.65

Currently not available

Prices incl. VAT plus shipping costs

Details

Dual Band WLAN Antenne (2.4GHz, 5.8GHz), u.FL Anschluss

€2.50

Currently not available

Details

Dual Band WLAN Antenne (2.4GHz, 5.8GHz), u.FL Anschluss

Diese selbstklebende Dualband-Antenne ist perfekt für Situationen, in denen Sie versuchen, ein Signal von einem Sender zu empfangen, den Sie in ein Gehäuse geklemmt haben. Sie funktioniert im 2,4-GHz- oder 5,8-GHz-Band und eignet sich hervorragend für WiFi, Bluetooth oder ZigBee. Schließen Sie die Antenne einfach mit dem beiliegenden U.FL-Stecker an, und dann abziehen und aufkleben! Features: Frequenzbereich: 2400-2500Mhz/5150-5850Mhz Gewinn: 8dBi interne Antenne VSWR: <1.8 Polarisation: Vertikal Eingangsimpedanz: 50Ω Leistung: 30w Größe: 95x13x1mm Kabellänge: 100mm Kabeltyp: 1.13 Coax-Kabel Stecker: U.FL Befestigung: 3M Aufkleber Betriebstemperatur: - 40 °C ~ + 80 °C Lagerungstemperatur: - 40 °C ~ + 80 °C Dokumente: Datenblatt

WRL-18087

€2.50

Currently not available

Prices incl. VAT plus shipping costs

Details

Dual LED 7-segment display, RGB

€5.35

Currently not available

Details

Dual LED 7-segment display, RGB

This is not your basic 7-segment display. The dual 7-segment display has two digits with an RGB LED in each individual segment! So now you have a small 7-segment LED in your project with a full colour display! The dual 7-segment display is breadboard friendly and has a digit height of 0.56in (14.22mm). The red LEDs have a forward voltage of 2VDC, 2.85VDC for green and 2.95VDC for blue, with a continuous forward current per segment of 10mA for the red LEDs and 5mA for the green and blue. Documents: Datasheet

COM-13999

€5.35

Currently not available

Prices incl. VAT plus shipping costs

Details

ESP32 Thing Stackable Header Set

€2.10

Available · 2 piece · 1-3 days

ESP32 Thing Stackable Header Set

These headers are designed for use with the SparkFun ESP32 Thing to connect to ESP32 Shield Boards. Each set of headers makes your ESP32 Thing easily stackable with the Power Control, Environmental, or Motion Shields as well as other applications. This set includes two 1x20 headers, enough to connect your ESP32 to anything you want! Contains: 2x 20-pin stackable header Documents: Dimensional drawing

PRT-14311

€2.10

Available · 2 piece · 1-3 days

Prices incl. VAT plus shipping costs

Fingerprint scanner, TTL, GT-521F52

€70.15

Available · 2 piece · 1-3 days

Fingerprint scanner, TTL, GT-521F52

Fingerprint scanners are ingenious! Why use a key when you have one right at the tip of your finger? Unfortunately, they are often unreliable or difficult to implement. Not anymore! This awesome GT-521F52 fingerprint module from ADH-Tech communicates via TTL Serial so you can easily incorporate it into your next project. The module itself handles the entire task of reading and identifying fingerprints with an integrated optical sensor and a 32-bit ARM Cortex M3 processor. To get started, simply register each fingerprint you want to save by sending the appropriate command and pressing your finger against the reader three times. The fingerprint scanner can store different fingerprints, and the database of prints can even be downloaded from the device and distributed to other modules. In addition to the fingerprint "template", the analysed version of the print, you can retrieve the image of a fingerprint and even pull raw images from the optical sensor! This module is the upgraded version of the GT-521F32 and can store up to an amazing 3,000 different fingerprints! It is able to recognise 360° fingerprints and download/upload templates via the serial interface. In addition, the GT-521Fxx series offers a resolution of 450dpi, with a false acceptance rate of <0.001% and a false rejection rate of <0.1%, while taking only <1.5 seconds to identify a unique fingerprint! The module is small and easy to mount, with four mounting holes surrounding the sensor. The onboard JST-SH connector has four signals: Vcc, GND, Tx and Rx. A compatible JST-SH pigtail can be found in the "Hookup Accessories" section below. Note: Please note that while this fingerprint scanner is equipped with the same connector we use on all of our Qwiic boards, it is NOT Qwiic or I2C compatible. This means all our Qwiic cables, such as our 100mm version, will work for this board. Features: Simple UART & USB communication protocol Complies with USB 2.0 full-speed specification Ultra flat optical sensor 450 dpi resolution Capable of 360° recognition Memory for 3,000 unique fingerprints Wake up with finger function Works well with dry, wet or rough fingerprints Anti-scratch with high surface hardness ? 5H 1:1 verification, 1:N identification High precision and high speed fingerprint identification technology 4x mounting holes 2x JST SH connectors Documents: Instructions for the fingerprint scanner (GT-521Fxx) Connection instructions Data sheet Programming instructions SDK Demo Software

SEN-14585

€70.15

Available · 2 piece · 1-3 days

Prices incl. VAT plus shipping costs

Flex Sensor 2.2" / 5.6cm

€14.20

Currently not available

Details

Flex Sensor 2.2" / 5.6cm

A simple flex sensor with a length of 2.2" / approx. 5.6 cm. When the sensor is bent, the resistance across the sensor increases. Patented technology from Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on the inside of the bend). The connector is 0.1" apart and breadboard friendly. Check the datasheet for full specifications. Note: Please refrain from bending or stressing this sensor at the base. The usable area of the sensor can easily be bent, but care should be taken to minimise bending outside the usable area. For best results, mount the base and the lower part firmly and only allow the flex sensor itself to bend. Documents: Data sheet ITP Sensor Workshop Quick start guide

SEN-10264

€14.20

Currently not available

Prices incl. VAT plus shipping costs

Details

Flex Sensor 4.5" / 11.4cm

€23.50

Available · 1 piece · 1-3 days

Flex Sensor 4.5" / 11.4cm

A simple flex sensor with a length of 4.5" / approx. 11.4 cm. When the sensor is bent, the resistance across the sensor increases. Patented technology from Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on the inside of the bend). The connector is 0.1" apart and breadboard friendly. Check the datasheet for full specifications. Documents: Datasheet (FS7548) ITP Sensor Workshop Connection instructions

SEN-08606

€23.50

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

Garmin LIDAR-Lite v3, up to 40m range, 1000Hz sampling rate, I2C/PWM, 5V DC

€159.90

Currently not available

Details

Garmin LIDAR-Lite v3, up to 40m range, 1000Hz sampling rate, I2C/PWM, 5V DC

SparkFun Garmin LIDAR-Lite v3, range up to 40 m, 1000 Hz, I2C/PWM, 5V DC The LIDAR-Lite v3HP from Garmin is a compact, high-performance optical distance measurement sensor, ideal for use in drones, robots or unmanned vehicles. With a range of 1 m to 40 m and a faster sampling rate of more than 1 kHz, it offers efficient performance and precise measurements. It is housed in a robust, IPX7-certified housing and consumes less power than its predecessor. Features at a glance Optical range from 1m to 40m with a resolution of 1cm and a typical accuracy of +/- 2.5cm at distances over 2m High sampling rate of over 1 kHz, usable via I2C or PWM interfaces. Energy efficient with a current consumption of 65 mA in idle mode and 85 mA during measurement. Technical specifications Laser type: 905nm (1.3 Watt) edge-emitting, single-stripe laser Power supply: Operating voltage 4.75-5VDC; max. 6V Update rate: Greater than 1kHz Interfaces: I2C or PWM Dimensions: 24.5mm x 53.5mm x 33.5mm Weight: 34g Other data Temperature range: -20°C to 60°C Water resistance: IPX7 Laser wavelength/peak power: 905nm / 1.3W Beam divergence: 8m radian Optical aperture: 12.5mm Scope of delivery 1x Garmin LIDAR-Lite v3HP 1x user manual 1x Connection guide Documents: Operation Manual Hookup Guide Arduino Library Important Safety and Product Info Garmin Support Centre

SEN-14599

€159.90

Currently not available

Prices incl. VAT plus shipping costs

Details

GNSS Multi-Band Antenne, magnetisch, SMA-Stecker, 5m

€85.40

Currently not available

Details

GNSS Multi-Band Antenne, magnetisch, SMA-Stecker, 5m

Die ANN-MB-00 GNSS-Multibandantenne unterscheidet sich von anderen GNSS/GPS-Antennen dadurch, dass sie sowohl das klassische L1 GPS-Band als auch das neu eingeführte (seit 2005) L2 GPS-Band. Darüber hinaus ist das ANN-MB-00 von u-blox sehr gut verarbeitet und verfügt über einen magnetischen Sockel mit Befestigungslöchern für eine zusätzliche Verankerung in den rauesten Umgebungen. Sie wurde für die neueste F9-Plattform von u-blox - einschließlich des ZED-F9P-Moduls - entwickelt und bietet eine schnelle, einfache und zuverlässige Multiband-Antennenlösung, kann aber mit jedem GPS/GNSS-Empfänger verwendet werden, der vom L1/L2-Dualempfang profitieren kann. Diese Antenne unterstützt GPS, GLONASS, Galileo und BeiDou und umfasst ein leistungsstarkes Multiband-RHCP-Dual-Feed-Patch-Antennenelement, einen eingebauten LNA mit hoher Verstärkung und SAW-Vorfilterung sowie ein 5 m langes SMA-Kabel. Features: Frequenz: L1 Band: 1559-1606MHz L2/L5 Band: 1197-1249MHz Spitzenverstärkung (über 15cm Durchmesser Grundfläche): L1 Band: 3.5dBic L2/L5 Band: 0-2.0dBic VSWR: max. 2 Bandbreite: min. 200MHz Impedanz: 50 Ohm Polarisation RHCP Unterstützt GPS, GLONASS, Galileo und BeiDou 5m Koaxialkabel mit SMA-Stecker Magnetischer Sockel, feste Installationsmöglichkeit (Schraubmontage, 2 x M4 Schrauben) Abmessungen: 60,0mm x 82,0mm x 22,5mm Gewicht: 175g (einschließlich Kabel) Dokumente: Datenblatt (ANN-MB-00) Produktübersicht

GPS-15192

€85.40

Currently not available

Prices incl. VAT plus shipping costs

Details

GPS Module - GP1818MK (56 Channel)

€23.75

Currently not available

Details

GPS Module - GP1818MK (56 Channel)

The GP-1818MK is a low-cost, high-performance GPS module with an integrated antenna. It can provide position, speed and accurate time information via the standard NMEA-0183 protocol. With its low power consumption and compact design, the GP-1818MK is perfect for basic tracking and positioning tasks, especially with regard to battery-powered systems. This is the recommended replacement for the 20U7 module. Only minimal changes are required to switch from this module to the GP-1818MK. The module comes with a 3-pin connector similar to the 20U7 module. It has the same 56-channel functions with low power consumption. Features: Based on the powerful MT3337 GPS single chip High sensitivity -165 dBm Low power consumption: Max 55mA @ 3.3V Integrated LNA with low gain mode for active antenna option 66 channels in search mode and 33 channels "All-in-View" tracking Up to 60,000 simultaneous search windows for fast TTFF and high-sensitivity detections Average cold start time under 29 seconds (clear sky) Supports the standard NMEA-0183 protocol Antenna size: 18mm W x 18mm D x 7mm H RoHS compliant (lead free) Documents: Datasheet

GPS-19166

€23.75

Currently not available

Prices incl. VAT plus shipping costs

Details

GPS receiver, GP-20U7, 56 channels

€23.20

Currently not available

Details

GPS receiver, GP-20U7, 56 channels

The GP-20U7 is a compact GPS receiver with an inbuilt powerful all-in-one GPS chipset. The GP-20U7 provides accurate position, speed and time measurements and has high sensitivity and tracking capabilities. Thanks to the low power consumption required by this receiver, the GP-20U7 is ideal for portable applications such as tablet PCs, smartphones and other devices that require positioning. This 56-channel GPS module, which supports the standard NMEA-0183 and uBlox 7 protocol, has a low power consumption of [email protected] (max), an onboard antenna and a tracking sensitivity of -162dBm. With 56 channels in search mode and 22 channels of all-in-view tracking, the GP-20U7 is quite a workhorse for its size. Features: 56-channel receiver (22-channel all-in-view) Sensitivity: -162dBm 2.5m position accuracy Cold start : 29s (Open Sky) 40mA @ 3.3V 3-pin JST assembled cable* 18.4mm x 18.4mm x 4mm Documents: Datasheet (GP-20U7)

GPS-13740

€23.20

Currently not available

Prices incl. VAT plus shipping costs

Details

GPS receiver, GP-735, 56 channels

€49.90

Available · 20 piece · 1-3 days

GPS receiver, GP-735, 56 channels

The GP-735 is a slim, ultra high performance and easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 seconds cold start time, the GP735 is a tiny but powerful piece of technology. The slim design makes it ideal for applications where you don't have a lot of space available. It's really quite small. This 56-channel GPS module, based on the 7th generation uBlox chipset, has an operating voltage of 3.3~5.5V, an antenna on the board and is connected to your system via TTL serial. The update rate of 1Hz is fast enough for most applications (and can be increased to 10Hz if required). So whether you're tracking a pet or building an autonomous car, the GP-735 has you covered! Note: We carry the "T" option of this module, which is TTL-UART and not USB. This receiver works with 6-pin JST cables and connectors with 1 mm spacing, which you can find in the Recommended Products section below! Features: 35 x 8 x 6.5 mm Documents: Data sheet GPS evaluation software

GPS-13670

€49.90

Available · 20 piece · 1-3 days

Prices incl. VAT plus shipping costs

GPS/GNSS Antenne, magnetisch, SMA-Stecker, 3m

€16.60

Currently not available

Details

GPS/GNSS Antenne, magnetisch, SMA-Stecker, 3m

Normale GPS-Antennen sind für den GPS-Empfang optimiert, was großartig ist, aber mit immer mehr Modulen, die zusätzliche Konstellationen verfolgen können (sogenannte GNSS-Empfänger), brauchen Sie die richtige Antenne! Diese außergewöhnliche GPS/GNSS-Antenne ist sowohl für den GPS- als auch für den GLONASS-Empfang ausgelegt. In Verbindung mit der SparkFun GPS-Grundplatte erreicht diese Antenne hervorragende TTFF- und SIV-Statistiken sowohl für GPS- als auch für GLONASS-Konstellationen. Die magnetische Halterung ermöglicht die einfache Montage auf einer Metallunterlage wie einer Bodenplatte oder einem Autodach. Die Antenne ist mit einem 3 m langen Kabel und einem Standard-SMA-Stecker ausgestattet. Merkmale: Abmessungen: 50x38x17mm Gewicht: 75g inklusive 3m Kabel Frequenzbereich: 1575 - 1610MHz GPS Mittenfrequenz: 1575.42MHz GLONASS Mittenfrequenz: 1602MHz LNA Spannung: 3 bis 5VDC LNA-Verstärkung: 28dB LNA-Strom: 10mA Anschlussstecker: SMA Impedanz: 50? Rechtsseitige Polarisierung Kabellänge: 3 Meter

GPS-14986

€16.60

Currently not available

Prices incl. VAT plus shipping costs

Details

Hobby geared motor, 140 rpm, 2 pieces

€6.55

Currently not available

Details

Hobby geared motor, 140 rpm, 2 pieces

This is a pair of hobby geared motors from DAGU. These gearmotors are the same ones recommended for use in the Shadow chassis and offer an inexpensive and easy to use setup to get your wheels turning. Each Hobby geared motor also features a 9mm long output on a straight axle. These geared motors require a voltage of 4.5V with an idle current of 190mA, while having a gear ratio of 48:1 and a wheel speed of 140 rpm unloaded. Each motor order is sold in packs of two. Note: The speed specified in the data sheet is 90RPM. Based on our own testing, we have found that the gearmotors can actually achieve an idle speed of approximately 140 RPM. Features: Suggested voltage: 4.5VDC No-load speed: 140RPM Current at no load: 190mA Max. Load current: 250mA Torque: 800 gf-cm Documents: Data sheet (DG01D)

ROB-13302

€6.55

Currently not available

Prices incl. VAT plus shipping costs

Details

Hobby geared motor, 65 rpm, right angle, 2 pieces

€6.50

Available · 13 piece · 1-3 days

Hobby geared motor, 65 rpm, right angle, 2 pieces

Hobby geared motor, 65 rpm, right angle, 2 pieces Get ready to take your projects to the next level with the DAGU Hobby geared motors, perfect for any maker! These robust, right-angle motors are ideal for installation in your robots, providing precise wheel rotation at an impressive speed of 65 rpm. With a voltage of 3-6V, they are extremely flexible to use in a wide range of projects. You benefit from powerful performance with a standstill current of up to 3A at 6V, meaning your designs won't stall even under load. Their 48:1 gear ratio offers the perfect balance between torque and speed. These geared motors are sold in packs of two. Features at a glance Perpendicular arrangement enables accurate tracking of wheel rotation. Easy integration into various robot kits such as Magician Chassis and RedBot. Sold in packs of two - ideal for building or expanding your projects. Technical specifications Voltage: 3V - 6V Speed without load: 65RPM Current without load: 200mA Current at standstill: 3A at 6V (1.5A at 3V) Gear ratio: 48:1 Wheel speed: 65rpm @ 3V unloaded (recommended) Scope of delivery 2x Hobby geared motor, 65 rpm Links Data sheet (DG02S) Product video

ROB-13258

€6.50

Available · 13 piece · 1-3 days

Prices incl. VAT plus shipping costs

Hobby Motor - Gearbox

€2.50

Currently not available

Details

Hobby Motor - Gearbox

This is our new hobby motor now with a 6mm, 10 tooth, gearbox to make your basic projects a little easier to manage. It works well for basic things like making a fan or spinning something pretty fast without much resistance. The motor has a normal operating voltage range of 1.0 to 3.0VDC, but can handle a maximum load of up to 12VDC and an idle speed of 6600±10% RPM (@1.0V DC, 110mA). Further information can be found in the data sheet linked below. Note: Although the data sheet for this hobby motor specifies a maximum voltage range of 3.0VDC, our supplier has assured us that it can handle a maximum load of 12VDC. Documents: Data sheet (M260)

ROB-11696

€2.50

Currently not available

Prices incl. VAT plus shipping costs

Details

Kunden kauften auch

New

Raspberry Pi 4 Computer Model B, 4GB RAM

Raspberry Pi 4 Model B is a member of the popular Raspberry Pi computer family. Compared to the previous generation Raspberry Pi 3 Model B+, it offers breakthrough improvements in processor speed, multimedia performance, memory and connectivity, while maintaining backward compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B offers desktop performance comparable to entry-level x86 PC systems. Key features of this product include a powerful 64-bit quad-core processor, dual display support with resolutions up to 4K via two micro HDMI ports, hardware video decoding up to 4Kp60, up to 4GB RAM, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0 and PoE capability (via a separate PoE HAT add-on). Technical specifications Processor Broadcom BCM2711 chipset 64 bit Quad Core ARM v8 Cortex-A72 @ 1.5 GHz Memory 4 GB LPDDR4 Connectivity 2.4 GHz and 5 GHz IEEE 802.11 b/g/n/ac Wireless LAN Bluetooth 5.0 BLE Gigabit Ethernet 2x USB 3.0 port 2x USB 2.0 port Access 40 pin GPIO header (fully backwards compatible with previous boards) Picture & sound 2x micro HDMI type D connector (up to 4K@60 Hz support) MIPI DSI display port MIPI CSI camera port Combined 3.5mm 4-pin jack socket for analogue audio and composite video Multimedia H.265 (4Kp60 decoding) / HEVC H.264 (1080p60 decoding; 1080p30 encoding) OpenGL ES, 3.0 graphics SD card support Micro SD format for loading the operating system and as data storage Power supply 5V/3.0A DC via USB Type C socket - (A high-quality 2.5A power supply from the Raspberry Pi 3 / 3B+ can be used via adapter (see under accessories) if downstream USB peripherals consume less than 500mA in total) 5V DC via GPIO header Power over Ethernet (PoE) - requires an optionally available PoE HAT Dimensions 85 x 56 x 16 mm Drill hole diameter: 2.75mm Note: Please note that the Raspberry Pi 4 is not compatible with images prior to 24 June 2019!

€58.90

Available · 100+ piece · 1-3 days

New

Raspberry Pi 4 Computer Model B, 4GB RAM

RPI4B-4GB

€58.90

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

Raspberry Pi 3 Model B

The Raspberry Pi 3 Model B looks like the Pi 2 B at first glance. It has the same size and many of the same components on board. So what's the difference? The new Pi 3 offers more processing power and connectivity on the board, saving you time when developing your applications. Perfect for your Internet of Things (IoT) designs. More processor speed. The Pi 3's 1.2 GHz CPU is one and a half times faster. Your Pi board works better. Connectivity on the board. The Pi 3 is equipped with 802.11 b/g/n wireless LAN and Bluetooth Classic & Low Energy (BLE). You can connect much faster without the need for an external device. 2.5A power supply. With more processor speed and built-in connectivity, you need more power. Power supplies for the previous Pi boards will not be sufficient. You will need the official Raspberry Pi power supply. New components. The Pi 3 has a chip antenna where the status LEDs were previously located. The status LEDs are still located on the board, right next to the slot for the microSD card. Features and benefits of the Pi 3 Broadcom BCM2837 chipset operating at 1.2 GHz 64 bit Quad Core ARM Cortex-A53 802.11 b/g/n wireless LAN Bluetooth 4.1 (Classic & Low Energy) Dual-core co-processor Videocore IV® Multimedia 1 GB LPDDR2 memory Supports all current ARM GNU/Linux distributions and Windows 10 IoT MicroUSB port for 2.5 A power supply unit 1 x 10/100 Ethernet connection 1 x HDMI video/audio connector 1 x RCA video/audio connector 4 x USB 2.0 connector 40 GPIO pins Chip antenna CSI Camera and DSI Display connector Slot for microSD card Dimensions: 85 x 56 x 17 mm

€37.90

Available · 100+ piece · 1-3 days

Raspberry Pi 3 Model B

RPI3B

€37.90

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

digital LED RGB NeoPixel Stripe, IP65 moulded, 60 LEDs/m, black conductor, 5m roll

Digital LED strip with WS2812B chipset. Can be controlled with a microcontroller, for example an Arduino. Compatible with the Adafruit NeoPixel Library: https://github.com/adafruit/Adafruit_NeoPixel Technical data LED / IC type: WS2812B LED type: RGB LED housing: 5050 Number of LEDs: 60 pcs / per metre Operating voltage: 5V / DC Power consumption: 3.6A / per metre - Note: Specification is when all LEDs on one metre are 100% white. Power: 18W / per metre IP code: IP65 / moulded & splash-proof Conductor colour: black Self-adhesive: yes, 3M adhesive layer Divisible: yes, every 3cm / after each LED Width: 10mm Height: approx. 3mmLength: 5m roll

€43.50

Available · 17 piece · 1-3 days

digital LED RGB NeoPixel Stripe, IP65 moulded, 60 LEDs/m, black conductor, 5m roll

NEOPSTR60WH

€43.50

Available · 17 piece · 1-3 days

Prices incl. VAT plus shipping costs

GY-BME280 Breakout Board, 3in1 sensor for temperature, humidity and air pressure

The Bosch BME280 is a 3 in 1 environmental sensor and combines measurements of humidity, air pressure and temperature. It has a digital I2C and SPI interface. Technical data: General: Operating voltage: 1.71 - 3.6V Dimensions: approx. 15.3 x 11.5 x 2.5 mm Delivery incl. pin header Features BME280: Humidity Response time (τ63%) 1s Accuracy tolerance ± 3 % relative humidity Hysteresis ≤ 2 % relative humidity Air pressure Pressure range 300 ... 1100 hPa (equiv. to +9000...-500 m above/below sea level) Relative accuracy ±0.12 hPa, equiv. to ±1 m (950 ... 1050hPa @25°C) Absolute accuracy typ. ±1 hPa (950 ...1050 hPa, 0 ...+40 °C) Operating temperature Operating range Operational -40°C - +85°C Full accuracy 0°C - +65°C

€5.60

Available · 100+ piece · 1-3 days

GY-BME280 Breakout Board, 3in1 sensor for temperature, humidity and air pressure

GY-BME280

€5.60

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

seeed Grove - Piezo buzzer / Active buzzer

Seeed Grove - Piezo Buzzer/Active Buzzer The Grove buzzer is an active piezoelectric signalling device that has a Grove interface and can therefore be integrated directly into microcontroller projects. With a volume of over 85 dB, it generates a clear acoustic signal. The buzzer can use both digital and PWM outputs to generate sounds at different pitches and intervals. Its low current consumption behaviour, typically below 20 mA, makes it suitable for use in energy-efficient applications. The resonant frequency range is 2300 ± 300 Hz. The buzzer is designed for applications where acoustic feedback or signalling is required. These include man-machine interfaces, microwave devices, doorbells, alarm devices, electrical alarms or timers. The component is suitable as a supplement for Arduino projects and can be connected directly to an Arduino board using a Grove Base Shield V2.0. Thanks to its compact dimensions of 24 × 20 × 9.8 mm, it can also be used in space-limited setups. The piezo buzzer uses piezoelectric materials to convert mechanical vibrations into acoustic signals. The sound is generated by electrical control, either continuously via a digital signal or variably via PWM (pulse width modulation). The Grove interface eliminates the need for manual wiring, making it easy to use in development projects. Features at a glance Active piezo buzzer with Grove connection Volume over 85 dB at resonance frequency Resonant frequency: 2300 ± 300 Hz Low current consumption below 20 mA Utilisation via digital outputs or PWM Compatibility Arduino with Grove Base Shield V2.0 Raspberry Pi with Grove customisation Technical specifications Operating voltage: 3.3-5 V Current consumption: < 20 mA (typical), max. 100 mA Volume: ≥ 85 dB Resonant frequency: 2300 ± 300 Hz Dimensions: 24 mm × 20 mm × 9.8 mm Weight: 10 g Other data Recommended accessories: Grove Base Shield V2.0 Scope of delivery1x module1x Grove connection cable Links Eagle layout V1.1 Source code V1.0 Transistor data sheet S9013 CDC files

€1.90

Available · 37 piece · 1-3 days

seeed Grove - Piezo buzzer / Active buzzer

SE-107020000

€1.90

Available · 37 piece · 1-3 days

Prices incl. VAT plus shipping costs

TTP223 Capacitive touch sensor / push-button

This capacitive push-button is ideal for switching operations without wear or mechanical actuation. The module is simply connected to a supply voltage and outputs a high level via the I/O connection when approached. Thanks to the capacitive mode of operation, the module can also be installed behind objects such as thin glass panels or cabinet doorsTechnical data: Supply voltage: 2.4 - 5.5 voltsDimensions: approx. 15 x 11 mm

€0.40

Available · 52 piece · 1-3 days

TTP223 Capacitive touch sensor / push-button

SW223-1

€0.40

Available · 52 piece · 1-3 days

Prices incl. VAT plus shipping costs

Adafruit DS3231 Precision RTC Breakout

The data sheet for the DS3231 explains that this component is an "Extremely Accurate I²C-Integrated RTC/TCXO/Crystal". And, hey, that's exactly what it is. This Real Time Clock (RTC) is the most accurate you can get in a small, low-power package. Most RTCs use an external 32 kHz clock crystal designed to keep time with low power consumption. And that's all well and good, but these crystals have a slight drift, especially when the temperature changes (the temperature only changes the oscillation frequency very, very slightly, but it adds up!) This RTC is housed in a robust case, because the crystal is inside the chip! And right next to the integrated quartz is a temperature sensor. This sensor compensates for frequency changes by adding or removing clock ticks so the timing stays on schedule. This is the best RTC you can get, and now we have it in a compact, breadboard-friendly breakout. With a coin cell battery that plugs into the back, you can keep accurate timing for years, even if the power is interrupted. Great for data logging and clocks, or anything where you really need to know the time. Supplied as a fully assembled and tested breakout plus a small piece of header. You can solder in the header to plug it into a breadboard, or solder wires directly. A coin cell is required to use the battery backup features! Check out our detailed tutorial for pinouts, assembly, wiring & code for Arduino and CircuitPython and more!

€19.25

Available · 18 piece · 1-3 days

Adafruit DS3231 Precision RTC Breakout

ADA3013

€19.25

Available · 18 piece · 1-3 days

Prices incl. VAT plus shipping costs

Breadboard with 400 contacts

€1.50

Available · 100+ piece · 1-3 days

Breadboard with 400 contacts

BB-400P

€1.50

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

Short-stroke pushbutton, vertical PCB mounting, 6x6mm, H 5.0mm

Short-stroke pushbutton, vertical PCB mounting, 6x6mm, H 5.0mm This short-stroke pushbutton is designed for vertical PCB mounting and has dimensions of 6x6mm and a button height of 5.0mm. It is suitable for applications with a contact load capacity of 0.05 A at 12 VDC and offers a switching force of 1.6N. Features at a glance High reliability: SPST-NO contact configuration and switching force of 1.6N. Versatility: Suitable for operating temperatures from -25 to 70°C. Easy mounting: Vertical PCB mounting with straight outputs. Technical data Switch type: Short-stroke pushbutton Number of switching positions: 1-digit Contact configuration: SPST-NO Contact rating DC (with resistive load): 0.05 A / 12 VDC Mounting: Push-through mounting Switching force: 1.6N Housing dimensions: 6 x 6mm Button height (PCB-measured): 5.0mm Switching mode: OFF-(ON) Button shape: round Output grid: 4.5 x 6.5mm Operating temperature: -25 to 70°C Button colour: black Outputs: PCB mounting, straight Max. Contact resistance: 50mΩ Min. insulation resistance: 100mΩ Soldering temperature: 250°C Scope of delivery 1x short-stroke push-button, vertical PCB mounting, 6x6mm, H 5.0mm

€0.09

Available · 100+ piece · 1-3 days