Charging board for 3.7V LiIon / LiPo batteries, Micro USB > solder pads, 1000mA
Product number: CHB-LIT1A
€0.80
Available · 100+ piece · 1-3 days
€0.80*
Product information "Charging board for 3.7V LiIon / LiPo batteries, Micro USB > solder pads, 1000mA"
Technical data
- Chipset: TC4056A
- Charging method: linear charging
- Charging current: 1A default, optionally adjustable
- Charging accuracy: 1.5%.
- Input voltage: 4.5V - 5.5V
- End of charge voltage: 4.2V
- 2 LEDs:
- blue LED: charging complete
- red LED: charging in progress
- Connections:
- Input: Micro USB type B socket or solder pads
- Output: solder pads
- Operating temperature: -10 - +85°C
- Dimensions: 25 * 19 * 19 * 10mm
Setting the charging current
By default, the board charges with a charging current of 1000mA.
By changing the resistor R3, the charging current can be set lower.
| R(K) | I(mA) |
| 30 | 50 |
| 20 | 70 |
| 10 | 130 |
| 5 | 250 |
| 4 | 300 |
| 3 | 400 |
| 2 | 580 |
| 1.66 | 690 |
| 1.5 | 780 |
| 1.33 | 900 |
| 1.2 | 1000 |
| Zolltarifnummer: | 85366990 |
|---|---|
| Brand: | BerryBase |
| Country of Origin: | China |
| EAN: | 4251266702580 |
| Gross Weight (kg): | 0.002 |
| Manufacturer ID: | CHB-LIT1A |
| Product ID: | CHB-LIT1A |
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]
WEEE number: 83795550
Person responsible for the EU
See manufacturer information
Safety instructions
- Always install and operate sensors and modules in accordance with the manufacturer's instructions.
- Always switch off the power supply before installation or maintenance.
- Avoid direct contact with electrical connections to prevent electric shocks.
- Only use in dry and suitable environments to avoid short circuits or malfunctions.
- Check the device for damage or defects before use.
- Do not operate above the specified voltage and current.
- In the event of malfunctions, disconnect the appliance from the power supply immediately.
- Dispose of in accordance with local electrical and electronic waste regulations.
- Do not dispose of in normal household waste as it may contain hazardous substances.
- Keep children away from the product to prevent misuse or injury.
Login
2 reviews
19 January 2022 00:00
-
-
10 August 2019 00:00
Kleine Ausmaße, passt in eine ...
Kleine Ausmaße, passt in eine Sattelstütze vom Fahrrad für den Einbau einer Akkubeleuchtung. Entspricht genau dem zu ladenden Akku. Ladezustandsanzeige ist auf der Platine verbaut
Ähnliche Artikel
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Customers also bought
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 78 piece · 1-3 days
Available · 25 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 47 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 37 piece · 1-3 days
Available · 100+ piece · 1-3 days
Content: 10 Meter (€0.12 / 1 Meter)
Available · 99 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 64 piece · 1-3 days
Similar products
Available · 1 piece · 1-3 days
Available · 20 piece · 1-3 days
Available · 95 piece · 1-3 days
Available · 18 piece · 1-3 days
Available · 8 piece · 1-3 days
Available · 53 piece · 1-3 days
Available · 2 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 3 piece · 1-3 days
Available · 3 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 10 piece · 1-3 days
Available · 9 piece · 1-3 days
Available · 72 piece · 1-3 days
