Elecrow Crowtail Stackable Shield for Raspberry Pi, GPIO 10x, IIC, UART, JST-PH 2.0 4-pin
Product number: PSMC18002C
€3.50
Order now and
secure 2 Berrys
secure 2 Berrys
Varianten
Pick your accessory
€11.90*
€24.90*
€4.50*
€84.90*
€63.90*
€1.50*
€78.90*
€249.90*
€39.90*
Available · 44 piece · 1-3 days
-
Available immediately
44 piece : 1-3 days
Wird oft zusammengekauft
Product information
Description
Product information "Elecrow Crowtail Stackable Shield for Raspberry Pi, GPIO 10x, IIC, UART, JST-PH 2.0 4-pin"
Crowtail - Stackable Shield for Raspberry Pi 2.0
The Crowtail Stackable Shield for Raspberry Pi 2.0 is a stackable expansion module designed for easy connection of Crowtail components to a Raspberry Pi. The board has ten universally usable GPIO pins, an IIC interface and a UART interface.
It serves as a connection layer between a Raspberry Pi and various Crowtail sensors and actuators, allowing complex projects to be realised in a modular way. The GPIO pins enable the digital or analogue input and output of signals.
The IIC interface allows communication via two data lines with other peripheral devices such as sensors or displays. The UART interface uses TX and RX lines for serial communication with microcontrollers or other external devices. The JST-PH 2.0 4-pin connector ensures a secure and firm hold when connecting to compatible modules.
The board is used as an interface between the Raspberry Pi and the Crowtail expansion modules. It simplifies the connection of various components for DIY, prototyping and IoT projects. Typical applications include adding additional sensors to a Raspberry Pi, controlling motors, relays or other actuators and building simple control systems. The stackable design also allows multiple modules to be used in parallel.
The shield can be used to connect sensors, displays or other input and output components directly to the Raspberry Pi. It supports serial communication via both IIC and UART and extends the GPIO connections of the Raspberry Pi. This makes it possible to connect various Crowtail modules and realise complex projects with just one board. In simple terms, this board helps the Raspberry Pi to talk to many other components and to send or receive data.
Features at a glance
The Crowtail Stackable Shield for Raspberry Pi 2.0 is a stackable expansion module designed for easy connection of Crowtail components to a Raspberry Pi. The board has ten universally usable GPIO pins, an IIC interface and a UART interface.
It serves as a connection layer between a Raspberry Pi and various Crowtail sensors and actuators, allowing complex projects to be realised in a modular way. The GPIO pins enable the digital or analogue input and output of signals.
The IIC interface allows communication via two data lines with other peripheral devices such as sensors or displays. The UART interface uses TX and RX lines for serial communication with microcontrollers or other external devices. The JST-PH 2.0 4-pin connector ensures a secure and firm hold when connecting to compatible modules.
The board is used as an interface between the Raspberry Pi and the Crowtail expansion modules. It simplifies the connection of various components for DIY, prototyping and IoT projects. Typical applications include adding additional sensors to a Raspberry Pi, controlling motors, relays or other actuators and building simple control systems. The stackable design also allows multiple modules to be used in parallel.
The shield can be used to connect sensors, displays or other input and output components directly to the Raspberry Pi. It supports serial communication via both IIC and UART and extends the GPIO connections of the Raspberry Pi. This makes it possible to connect various Crowtail modules and realise complex projects with just one board. In simple terms, this board helps the Raspberry Pi to talk to many other components and to send or receive data.
Features at a glance
- Stackable expansion board for Raspberry Pi
- 10 GPIO pins for digital or analogue signals
- 1 IIC interface for serial communication
- 1 UART interface for serial data transmission
- Compatible with Crowtail modules
- JST-PH 2.0 4-pin connector for stable connection
- Raspberry Pi (depending on model, depending on GPIO assignment)
- Crowtail sensors and modules
- Model number: PSMC18002C
- Size (L x W x H): 63.5 x 25.4 x 17.8 mm
- Product weight: 13 g
- Stackable design allows multiple modules to be used at the same time
- 1x Crowtail - Stackable Shield for Raspberry Pi 2.0
Manufacturer and safety information
Manufacturer information
Elecrow
Nanchang Huafeng Industrial Park
CN Baoan District, Shenzhen
https://www.elecrow.com/
[email protected]
WEEE number: 85275112
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]
Safety instructions
Elecrow
Nanchang Huafeng Industrial Park
CN Baoan District, Shenzhen
https://www.elecrow.com/
[email protected]
WEEE number: 85275112
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]
Safety instructions
- Ensure avoidance of direct contact with live components.
- Only operate sensors and modules within the intended voltage range.
- Avoid static discharge by earthing before use in order to protect electronic components.
- Do not exert any mechanical force on the components to avoid damage.
- Never use the product in damp, wet or extreme temperature conditions.
- Keep away from children, as small parts could be swallowed.
- Do not reuse defective or damaged modules and dispose of them accordingly.
- Dispose of electronic components as electronic waste in accordance with local regulations.
- Dispose of batteries or rechargeable batteries separately and in an environmentally friendly manner if integrated in the system.
- When soldering or modifying, avoid possible fumes or vapours and work in a well-ventilated environment.
Reviews
0
Login
Skip product gallery
Ähnliche Artikel
Elecrow Crowtail-Base Shield for Microbit, 8 ports, IIC/UART/GPIO, Plug-and-Play
€4.90
Crowtail-Base Shield for Microbit V2.2/V1.2
Discover the Crowtail-Base Shield for Microbit V2.2/V1.2, which has been specially designed for your BBC micro
. With this shield, you can realise your creative ideas easily and without extensive knowledge of electronics or programming. It has 8 crowtail ports that support a variety of interfaces such as IIC, UART and GPIO, so you can realise a wide range of projects - from robots to musical instruments. The simple plug-and-play integration without soldering makes it ideal for quick and innovative projects. Whether you're a student, engineer or hobbyist, this shield opens up new possibilities for realising your technical visions.
Features at a glance
Compatibility: Specially developed for BBC micro:bit.
Interfaces: 8 crowtail ports for various interfaces (IIC/UART/GPIO).
Simplified connection: No need to solder or use jumper cables thanks to integrated crowtail connectors.
Integrated level conversion drive for various project options.
Technical data
Number of crowtail ports: 8
Interface types: IIC/UART/GPIO
Dimensions: 82 mm (L) x 66 mm (W) x 13 mm (H)
Scope of delivery
1x Crowtail-Base Shield for Micro:bit
Currently not available
Elecrow Crowtail Base Shield 2.0 for Raspberry Pi, UART I2C Analogue Digital, MCP3008
€6.90
Elecrow Crowtail- Base Shield for Raspberry Pi 2.0
This base shield enables the connection of Crowtail modules to a Raspberry Pi. It has various interfaces for UART, I2C, analogue and digital signals. The integrated MCP3008 ADC module allows analogue output modules to be used with the Raspberry Pi. Communication between the ADC chip and the Raspberry Pi takes place via the SPI interface.
Features at a glance
Supports UART, I2C, analogue and digital interfaces
Integrated ADC chip MCP3008 for analogue modules
Crowtail-compatible interface
Compact size: 65 x 56 x 18 mm
Compatibility
Raspberry Pi models with GPIO interface
Crowtail modules with supported interfaces via JST-PH 2.0 4-pin connector
Technical specifications
Dimensions: 65 x 56 x 18 mm
Integrated ADC chip: MCP3008
Supported interfaces: UART, I2C, analogue, digital
Communication with Raspberry Pi via SPI
Other data
Enables easy connection of Crowtail modules to the Raspberry Pi
Scope of delivery
1x Crowtail base shield for Raspberry Pi
Links
User manual
Available · 29 piece · 1-3 days
Skip product gallery
Zubehör
Elecrow CrowPi L Base Shield, GPIO-Schnittstelle, ADC-Chip, SPI, Acrylgehäuse, für Crowtail-Module
€11.90
Elecrow CrowPi L Base Shield
Das Elecrow CrowPi L Base Shield ist eine Erweiterungsplatine mit GPIO-Schnittstelle, die speziell für den CrowPi L entwickelt wurde. Es ermöglicht die einfache Verbindung mit über 150 verschiedenen Crowtail-Modulen zur Erforschung und Anwendung von Sensoren. Die Crowtail-Module können direkt über die Schnittstellen des Base Shields angeschlossen werden. Zudem verfügt das Shield über einen integrierten ADC-Chip, der die Verwendung analoger Ausgangsmodule auf dem CrowPi L ermöglicht. Der MCP3008-Chip sorgt für die Kommunikation mit dem Raspberry Pi über die SPI-Schnittstelle.
Merkmale im Überblick
GPIO-Schnittstelle zur Verbindung mit Crowtail-Modulen
Unterstützt über 150 verschiedene Crowtail-Module
Integrierter ADC-Chip (MCP3008) für analoge Module
Kommunikation über SPI-Schnittstelle
Acrylschutzgehäuse für zusätzliche Stabilität
Kompatibilität
CrowPi L
Raspberry Pi mit GPIO-Schnittstelle
Technische Daten
Größe des Base Shields (Länge x Breite): 73,4 mm x 58,3 mm
Größe des Acrylschutzgehäuses (Länge x Breite): 76,7 mm x 68,7 mm
Länge des GPIO-Kabels: 100 mm
ADC-Chip: MCP3008
Sonstige Daten
Material des Schutzgehäuses: Acryl
Lieferumfang
1x CrowPi L Base Shield
1x GPIO-Verlängerungskabel
1x Schraubenpaket
2x Acrylschutzgehäuse
Links
Download der PCB-Spezifikationen
Available · 10 piece · 1-3 days
Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V
€3.50
Crowtail Shield für Raspberry Pi Pico (RP2040)
Maximiere dein Raspberry Pi Pico-Erlebnis mit dem Crowtail Shield! Dieses Plug-and-Play-Zubehör ermöglicht es dir, ohne Löten sofort in Projekte einzusteigen. Es bietet vielseitige Anschlüsse wie I2C, Analog- und Digital-Ports, UART und SPI, ideal für schnelle Prototypenentwicklung. Die stapelbare Platine und der wählbare Stromschalter erhöhen die Flexibilität, während Kompatibilität mit MicroPython und Arduino vielfältige Programmiermöglichkeiten bietet. Perfekt für Maker, die ihre Ideen schnell umsetzen möchten!
Merkmale im Überblick
Erweiterungsplatine: Plug-and-Play-Funktionalität ermöglicht schnellen Aufbau und direkte Verwendung mit vorgelötetem Raspberry Pi Pico.
Anpassbar: Mit einem wählbaren 3.3V/5V Stromschalter und SWD Debugging-Schnittstelle für flexible Entwicklungsbedingungen.
Stapelbar: Ermöglicht den Aufbau mehrerer Schichten für komplexe Projekte ohne zusätzlichen Verkabelungsaufwand.
Breite Plattformunterstützung: Kompatibel mit MicroPython & Arduino, bietet Vielseitigkeit in der Programmierung und Projektentwicklung.
Technische Daten
Analog Ports: 3 (A1, A2, A3)
Digital Ports: 3 (D1, D2, D3)
UART Ports: 2
I2C Ports: 2
SPI Port: 1
BAT Port: 1
Power Switch: 5V/3.3V wählbar
Betriebstemperatur: -25℃ bis +85℃
Betriebsspannung: 3/5V Eingangsleistung
Abmessungen: 65mm x 56mm
Gewicht: 26g
Lieferumfang
1x Crowtail Shield für Raspberry Pi Pico
Links
Wiki
Currently not available
Elecrow EasyESP-1 developer board, ESP8266, USB-UART, 180-point plug-in board, Grove/Crowtail connection
€24.90
EasyESP-1: A development board for beginners with ESP8266
The EasyESP-1 is a development board for the low-cost, WiFi-enabled ESP8266 microcontroller, ideal for beginners. It comes with a USB-to-serial converter already installed, so you don't need any additional hardware to load firmware onto the ESP8266 chip. The ESP module used is the ESP-12E. All I/O pins are connected to 0.1-inch female headers and standard Grove/Crowtail connectors, making it easy to access and connect to various sensors and modules. A 180-point breadboard facilitates experimentation and testing of external circuits connected to the ESP8266 peripherals.
Features at a glance
Easy access to all GPIO pins via female headers and grove/crowtail connectors.
Integrated USB UART chip facilitates programming and debugging.
180-point breadboard for experiments with test circuits.
Two pushbuttons for user input and one output LED
Slide switch for activating/deactivating the auto wake-up function in sleep mode
Onboard 3.3V (800 mA) regulated power supply
Technical specifications
Weight: 25g
On the board:
5V DC input
Breadboard with 180 contacts
CP2102 USB UART bridge
Current selector switch
I/O header
I/O grove (3 pin)
I/O grove (4 pin)
I2C-Grove
O/P LED
I/P switch
ESP-12E
Scope of delivery
1x EasyESP-1 Board x1
Available · 3 piece · 1-3 days
Elecrow Crowtail Base Shield 2.0 for Arduino, I2C UART Analogue Digital, 4-Pin JST, 3.3-5V
€4.50
Elecrow Crowtail- Base Shield for Arduino 2.0
The Crowtail-Base Shield is an expansion board that is compatible with the Arduino. It provides all I/O ports of the Arduino in the form of crowtail connectors. These include digital and analogue inputs as well as specialised interfaces such as I2C and UART.
The shield makes it easy to connect crowtail modules to an Arduino board. This allows sensors, actuators and other modules to be connected directly without the need for additional wiring or soldering.
The product is suitable for prototyping, electronics projects and educational purposes. The standardised connections facilitate the development of Arduino projects and reduce the amount of wiring and troubleshooting required.Thanks to the integrated JST-PH 2.0 4-pin connector, the sensor can be easily and securely connected to microcontrollers or other compatible systems. The JST connector ensures a stable connection and facilitates integration into existing crowtail or DIY projects.
Features at a glance
Supports an operating voltage of 3.3 V to 5 V DC
All Arduino I/O ports are available as crowtail connectors
Integrated digital, analogue, I2C and UART interfaces
JST-PH 2.0 4-pin connector
RoHS compliant
Compact design with dimensions of 69.5 mm x 55.2 mm x 23.5 mm
Compatibility
Arduino Uno
Arduino Mega
Other Arduino-compatible microcontrollers
Technical specifications
Operating voltage: 3.3-5 V DC
Dimensions: 69.5 mm (L) x 55.2 mm (W) x 23.5 mm (H)
RoHS compliant
JST-PH 2.0 4-pin connection
Other data
Enables direct connection of Crowtail modules with Arduino
No additional soldering or wiring required
Scope of delivery
1x Crowtail-Base Shield
Links
Base Shield circuit diagram
Product Wiki
Available · 10 piece · 1-3 days
Elecrow Crowtail connector JST-PH 2.0, 4-pin, 2.0mm pitch, without cable, 10 pieces
€1.00
Elecrow Crowtail JST-PH 2.0 4-Pin Connector-HY2.0mm (10 pieces)
This 4-pin connector with a pitch of 2.0 mm enables easy connection of cables to circuit boards or components. It is known as a "crowtail connector" and facilitates compatibility between different components during the shielding process. Suitable for fitting sensors such as strain gauges with a JST-PH 2.0 connector.
A JST-PH 2.0 connector without cable is a compact connection solution for electronic applications. The grid dimension of 2.0 mm enables space-saving integration into electronic devices and circuits. Due to the lack of pre-assembled cables, the connection can be customised to the respective cable length or specification.
The connector supports the creation of flexible connections between sensors, modules and microcontrollers. This flexibility is particularly important for prototypes, customised products and modular systems.
In the DIY electronics sector, the JST-PH 2.0 connector is often used to connect sensors with microcontrollers such as Arduino, ESP32 or Raspberry Pi. LED modules, sensor arrays or power supplies for small devices are also typical areas of application. It is suitable for systems with low voltages and moderate currents. Thanks to its reverse polarity protection and compact design, it is also suitable for tight installation situations, such as in housings or wearables.
Manual assembly means that any contact problems caused by pre-assembled, inferior connections can be avoided. This ensures a reliable electrical connection.
The 4-pin connector is often used in combination with lithium polymer batteries, for example for connection to charging or protective circuits. The connector is also widely used in DIY robotics projects and IoT devices with low power requirements.
Features at a glance
4-pin connector
Pitch: 2.0 mm
Enables simple connection between cables and circuit boards
Suitable for crowtail systems
Compatibility
PCB systems with 2.0 mm pitch
Suitable for crowtail modules and connections
Compatible with microcontroller platforms such as Arduino, ESP32, Raspberry Pi
Technical specifications
Dimensions: 12.6 mm (height) x 11.3 mm (width) x 8.3 mm (inner width)
Number of pins: 4
Pitch: 2.0 mm
Other data
Facilitates the connection between cables and various components
Suitable for in-house cable production for prototypes or customised solutions
Scope of delivery
10x Crowtail 4-pin connector
Currently not available
Raspberry Pi 5, 8GB RAM
€84.90
Raspberry Pi 5 with 8 GB RAM This advanced model impresses with two microHDMI ports that enable outstanding image output. Two USB 3.0 ports and two USB 2.0 ports are available for data transfer. The Raspberry Pi 5 is equipped with a modern USB-C port for the power supply. The dual-band WLAN, which supports both 2.4 GHz and 5 GHz, and Bluetooth 5/BLE ensure outstanding networking capabilities. The Ethernet connection enables rapid data transfers at speeds of up to 1000 Mb/s. The Pi 5 also offers the option of being supplied with power via PoE (Power over Ethernet). All other specifications and features are consistent with those of the Raspberry Pi 4, ensuring continuity and reliability in the Raspberry Pi range.
Accessories for the Raspberry Pi 5
To utilise the full potential of your Raspberry Pi 5, we recommend the following accessories:
A microSD card, ideally with an operating system already installed.
A stable power supply via USB-C, preferably 5V / 5A DC or 27W.
A monitor and a suitable HDMI cable.
Of course, a keyboard and mouse for easy operation.
Product features Raspberry Pi 5
2.4GHz Quad-Core 64-bit Arm Cortex-A76 CPU: The power that will amaze you.
VideoCore VII GPU: Enjoy state-of-the-art graphics with support for OpenGL ES 3.1 and Vulkan 1.2.
Dual 4Kp60 HDMI output: For razor-sharp displays with HDR support.
Up to 8GB LPDDR4X-4267 SDRAM: So that you always have enough RAM available.
Dual-band 802.11ac Wi-Fi and Bluetooth 5.0/BLE: For the best connections at all times.
The Raspberry Pi 5 offers an impressive variety of connection options
2 × USB 3.0 and 2 × USB 2.0 ports: For all your peripheral devices
Gigabit Ethernet: Fast and stable network connections, with up to 1000Mb/s
Dual 4Kp60 HDMI: For simultaneous, brilliant screen output
And many more, from microSD card slots to GPIO headers
2 × 4-lane MIPI camera / display port
PCIe2.0 for future HATs
40 GPIO pin headers: to realise your projects
Advantages of the Raspberry Pi 5
The Raspberry Pi 5 is not just another mini-computer. It represents the future: a powerhouse in a compact design that is ready for a wide range of applications - whether for creative projects at home or demanding industrial applications.
Can you imagine an everyday life where you are not just a consumer, but also a creator? Where you design technology according to your wishes? The Raspberry Pi 5 takes you there!
Advantages of the Raspberry Pi 5 compared to the Raspberry Pi 4
What
Raspberry Pi 4 Mod B
Raspberry Pi 5
Processor
Quad-Core Cortex A72
Quad-Core Cortex-A76
Architecture
ARM 64-bit
ARM 64-bit
Clock frequency
1.5 GHz
2.4 GHz
RAM
1GB, 2GB, 4GB, 8GB LPDDR4
2GB, 4GB and 8GB LPDDR4X *)
WiFi
2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/a
Dual-band 802.11ac
Bluetooth
5.0, BLE
5.0, BLE
USB
2 x USB2.0
2 x USB3.0
2 x USB2.0
2 x USB3.0 with 5Gbps each
Decoder
H.265 (4Kp60 decode)
H.264 (1080p60 decode, 1080p30 encode)
OpenGL ES, 3.0 graphics
4Kp60 HECV
OpenGL ES 3.1, Vulkan 1.2
LAN
Gigabit
Gigabit with PoE+ support
Input power
5V / 3A DC
5V / 5A DC
GPIO
40-pin header
40-pin header
New features
-
RealTimeClock
PCIe 2.0
Integrated power button
Fan connector
Operating system for Raspberry Pi 5
With the Raspberry Pi 5 you have the choice: The official Raspberry Pi OS is available, but other Linux distributions and even Windows 10 ARM64 can also be brought to life on this machine
Important notes for the Raspberry Pi 5
Your Raspberry Pi 5 is a powerhouse that should be treated with care. Keep it away from moisture and avoid extremely high or low temperatures.
The future has only just begun. With the Raspberry Pi 5, you are perfectly equipped to be at the forefront. Experience the technology you've always wanted!
FAQ
What is the main difference between the Raspberry Pi 5 and the Raspberry Pi 4?
The Raspberry Pi 5 offers improved CPU performance, enhanced graphics options, more RAM and a variety of improved connectivity options and long-awaited features such as RTC or PCIe 2.0, compared to the Raspberry Pi 4.
Does the Raspberry Pi 5 support 4K resolution?
Yes, the Raspberry Pi 5 supports dual 4K displays via its HDMI ports.
What operating systems are compatible with the Raspberry Pi 5?
The Raspberry Pi 5 supports a variety of operating systems, including various Linux distributions and Windows IoT Core
How much RAM is available in the Raspberry Pi 5?
Models with 2 GB, 4 GB and 8 GB RAM are currently available.
Does the Raspberry Pi 5 offer support for PoE (Power over Ethernet)?
Yes, with an additional PoE+ HAT, the Raspberry Pi 5 can be supplied with power via Ethernet. Separate hardware that supports this in your network is required.
What connections does the Raspberry Pi 5 offer?
The Raspberry Pi 5 has USB 3.0 and 2.0 ports, Gigabit Ethernet, dual 4K HDMI, microSD card slot, 2 MIPI camera / display ports, PCIe 2.0 and the familiar 40-pin GPIO header.
What safety precautions should I take when using the Raspberry Pi 5? The Raspberry Pi 5 should be operated in a well-ventilated area and should not be placed near water sources. It should be firmly secured or placed on a stable, flat, non-conductive surface.
Available · 100+ piece · 1-3 days
Raspberry Pi 5, 4GB RAM
€63.90
Raspberry Pi 5 with 4 GB RAM This advanced model impresses with two microHDMI ports that enable outstanding image output. Two USB 3.0 ports and two USB 2.0 ports are available for data transfer. The Raspberry Pi 5 is equipped with a modern USB-C port for the power supply. The dual-band WLAN, which supports both 2.4 GHz and 5 GHz, and Bluetooth 5/BLE ensure outstanding networking capabilities. The Ethernet connection enables rapid data transfers at speeds of up to 1000 Mb/s. The Pi 5 also offers the option of being supplied with power via PoE (Power over Ethernet). All other specifications and features are consistent with those of the Raspberry Pi 4, ensuring continuity and reliability in the Raspberry Pi range.
Accessories for the Raspberry Pi 5
To utilise the full potential of your Raspberry Pi 5, we recommend the following accessories:
A microSD card, ideally with an operating system already installed.
A stable power supply via USB-C, preferably 5V / 5A DC or 27W.
A monitor and a suitable HDMI cable.
Of course, a keyboard and mouse for easy operation.
Product features Raspberry Pi 5
2.4GHz Quad-Core 64-bit Arm Cortex-A76 CPU: The power that will amaze you.
VideoCore VII GPU: Enjoy state-of-the-art graphics with support for OpenGL ES 3.1 and Vulkan 1.2.
Dual 4Kp60 HDMI output: For razor-sharp displays with HDR support.
Up to 8GB LPDDR4X-4267 SDRAM: So that you always have enough RAM available.
Dual-band 802.11ac Wi-Fi and Bluetooth 5.0/BLE: For the best connections at all times.
The Raspberry Pi 5 offers an impressive variety of connection options
2 × USB 3.0 and 2 × USB 2.0 ports: For all your peripheral devices
Gigabit Ethernet: Fast and stable network connections, with up to 1000Mb/s
Dual 4Kp60 HDMI: For simultaneous, brilliant screen output
And many more, from microSD card slots to GPIO headers
2 × 4-lane MIPI camera / display port
PCIe2.0 for future HATs
40 GPIO pin headers: to realise your projects
Advantages of the Raspberry Pi 5
The Raspberry Pi 5 is not just another mini-computer. It represents the future: a powerhouse in a compact design that is ready for a wide range of applications - whether for creative projects at home or demanding industrial applications.
Can you imagine an everyday life where you are not just a consumer, but also a creator? Where you design technology according to your wishes? The Raspberry Pi 5 takes you there!
Advantages of the Raspberry Pi 5 compared to the Raspberry Pi 4
What
Raspberry Pi 4 Mod B
Raspberry Pi 5
Processor
Quad-Core Cortex A72
Quad-Core Cortex-A76
Architecture
ARM 64-bit
ARM 64-bit
Clock frequency
1.5 GHz
2.4 GHz
RAM
1GB, 2GB, 4GB, 8GB LPDDR4
2GB, 4GB and 8GB LPDDR4X *)
WiFi
2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/a
Dual-band 802.11ac
Bluetooth
5.0, BLE
5.0, BLE
USB
2 x USB2.0
2 x USB3.0
2 x USB2.0
2 x USB3.0 with 5Gbps each
Decoder
H.265 (4Kp60 decode)
H.264 (1080p60 decode, 1080p30 encode)
OpenGL ES, 3.0 graphics
4Kp60 HECV
OpenGL ES 3.1, Vulkan 1.2
LAN
Gigabit
Gigabit with PoE+ support
Input power
5V / 3A DC
5V / 5A DC
GPIO
40-pin header
40-pin header
New features
-
RealTimeClock
PCIe 2.0
Integrated power button
Fan connector
Operating system for Raspberry Pi 5
With the Raspberry Pi 5 you have the choice: The official Raspberry Pi OS is available, but other Linux distributions and even Windows 10 ARM64 can also be brought to life on this machine
Important notes for the Raspberry Pi 5
Your Raspberry Pi 5 is a powerhouse that should be treated with care. Keep it away from moisture and avoid extremely high or low temperatures.
The future has only just begun. With the Raspberry Pi 5, you are perfectly equipped to be at the forefront. Experience the technology you've always wanted!
FAQ
What is the main difference between the Raspberry Pi 5 and the Raspberry Pi 4?
The Raspberry Pi 5 offers improved CPU performance, enhanced graphics options, more RAM and a variety of improved connectivity options and long-awaited features such as RTC or PCIe 2.0, compared to the Raspberry Pi 4.
Does the Raspberry Pi 5 support 4K resolution?
Yes, the Raspberry Pi 5 supports dual 4K displays via its HDMI ports.
What operating systems are compatible with the Raspberry Pi 5?
The Raspberry Pi 5 supports a variety of operating systems, including various Linux distributions and Windows IoT Core
How much RAM is available in the Raspberry Pi 5?
Models with 2 GB, 4 GB and 8 GB RAM are currently available.
Does the Raspberry Pi 5 offer support for PoE (Power over Ethernet)?
Yes, with an additional PoE+ HAT, the Raspberry Pi 5 can be supplied with power via Ethernet. Separate hardware that supports this in your network is required.
What connections does the Raspberry Pi 5 offer?
The Raspberry Pi 5 has USB 3.0 and 2.0 ports, Gigabit Ethernet, dual 4K HDMI, microSD card slot, 2 MIPI camera / display ports, PCIe 2.0 and the familiar 40-pin GPIO header.
What safety precautions should I take when using the Raspberry Pi 5?
The Raspberry Pi 5 should be operated in a well-ventilated area and should not be placed near water sources. It should be firmly secured or placed on a stable, flat, non-conductive surface.
Available · 100+ piece · 1-3 days
Elecrow crowtail cable, JST-PH 2.0 4-pin connection cable for modules, 20.5 cm, 5 pieces
€1.50
Elecrow crowtail cable, JST-PH 2.0 4-pin connection cable
A 4-pin crowtail cable is used to connect modules to a main control board. It enables signal transmission and power supply within a crowtail system. The cable is equipped with a JST-PH 2.0 4-pin connector and enables a stable and reliable connection between compatible components. The modular design eliminates the need for soldering, making integration into existing systems easier.
Crowtail is a modular electronics system for connecting sensors, actuators and microcontrollers. It enables a standardised connection via pre-assembled cables and connectors. This 4-pin cable ensures that the modules can be used without additional soldering or complex cabling.
The cable is often used to connect input and output modules with control boards in the Arduino, DIY electronics or training systems sector. The simple handling reduces installation effort and configuration errors.
The product is used to establish electrical connections between compatible components of a crowtail system. It has a 4-pin JST-PH 2.0 connector that transmits signals and power. It is typically used in electronic projects or training systems where a fast, solder-free connection between sensors, actuators and microcontrollers is required.
Overview of features
4-pin connection for crowtail modules
Compatible with crowtail systems
Enables simple connection without soldering
Length: 20.5 cm
Compatibility
Suitable for crowtail modules
Compatible with crowtail-compatible microcontrollers
Technical specifications
Cable length: 20.5 cm
4-pin connector
Other data
Connection cable for modular electronic systems
Scope of delivery
5 x 4-pin crowtail cable
Available · 73 piece · 1-3 days
Raspberry Pi 4 Computer Model B, 8GB RAM
€78.90
Raspberry Pi 4 Model B is a member of the popular Raspberry Pi computer family. Compared to the previous generation Raspberry Pi 3 Model B+, it offers breakthrough improvements in processor speed, multimedia performance, memory and connectivity, while maintaining backward compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B offers desktop performance comparable to entry-level x86 PC systems. Key features of this product include a powerful 64-bit quad-core processor, dual display support with resolutions up to 4K via two micro HDMI ports, hardware video decoding with up to 4Kp60, up to 8GB RAM, dual-band 2.4/5.0 GHz wireless LAN, Bluetooth 5.0, Gigabit Ethernet, USB 3.0 and PoE capability (via a separate PoE HAT add-on). Technical specifications
Processor
Broadcom BCM2711 chipset
64 bit Quad Core ARM v8 Cortex-A72 @ 1.5 GHz
Memory
8 GB LPDDR4
Connectivity
2.4 GHz and 5 GHz IEEE 802.11 b/g/n/ac Wireless LAN
Bluetooth 5.0 BLE
Gigabit Ethernet
2x USB 3.0 port
2x USB 2.0 port
Access
40 pin GPIO header (fully backwards compatible with previous boards)
Picture & sound
2x micro HDMI type D connector (up to 4K@60 Hz support)
MIPI DSI display port
MIPI CSI camera port
Combined 3.5mm 4-pin jack socket for analogue audio and composite video
Multimedia
H.265 (4Kp60 decoding) / HEVC
H.264 (1080p60 decoding; 1080p30 encoding)
OpenGL ES, 3.0 graphics
SD card support
Micro SD format for loading the operating system and as data storage
Power supply
5V/3.0A DC via USB Type C socket - (A high-quality 2.5A power supply from the Raspberry Pi 3 / 3B+ can be used via adapter (see under accessories) if downstream USB peripherals consume less than 500mA in total)
5V DC via GPIO header
Power over Ethernet (PoE) - requires an optionally available PoE HAT
Dimensions
85 x 56 x 16 mm
Drill hole diameter: 2.75mm
Note Please note that the Raspberry Pi 4 is not compatible with images prior to 24 June 2019!:
Available · 100+ piece · 1-3 days
Elecrow CrowPi L Raspberry Pi Laptop, 11,6 Zoll Display, 40-Pin GPIO, 5000mAh Akku, ohne Pi, QWERTY
€249.90
Elecrow CrowPi L - Raspberry Pi Laptop für Programmieranfänger und Hardware
Der Elecrow CrowPi L ist ein vielseitiger Raspberry Pi Laptop, der speziell für Programmieranfänger und Hardware-Enthusiasten entwickelt wurde. Es handelt sich um eine Lite-Version des CrowPi2, die viele der gängigen Herausforderungen bei DIY-Raspberry Pi-Laptops verbessert. Der Laptop kommt mit einem 11,6 Zoll Bildschirm, einer integrierten Tastatur mit Touchpad sowie einer praktischen 5000mAh-Batterie, die für bis zu 3 Stunden mobilen Betrieb sorgt.
Wichtig zu beachten ist, dass im Lieferumfang kein Raspberry Pi SBC (Single Board Computer) enthalten ist und das Gerät für einen Raspberry Pi 4 konzipiert ist. Das gibt dir die Flexibilität, die für deine Anforderungen passende Version eines Raspberry Pi 4B auszuwählen. Diese Entscheidung ermöglicht es dir, den Laptop an deine individuellen Anwendungszwecke und Projekte anzupassen, oder einen bisher unbenutzten Raspberry Pi in einen Laptop zu verwandeln.
Das CrowPi L unterstützt Raspberry Pi 4B, ist jedoch nicht kompatibel mit dem Raspberry Pi 3. Das System ermöglicht eine schnelle und einfache Installation des Raspberry Pi über die magnetische Montage, die den Aufbau erheblich vereinfacht. Durch die Auswahl des passenden Raspberry Pi kannst du sicherstellen, dass dein CrowPi L genau die Leistung und Funktionalität bietet, die du für deine Programmier- und Hardwareprojekte benötigst.
Verwendungs-Szenarien
Mit dem Elecrow CrowPi L, einem Laptop speziell für den Raspberry Pi 4B, können zahlreiche Projekte effizienter umgesetzt werden, da es den Raspberry Pi in ein tragbares und benutzerfreundliches System integriert. Hier einige Projekte, die besonders von der Laptop-Form profitieren:
Mobile Robotersteuerung: Mit dem CrowPi L lässt sich ein Raspberry Pi direkt in einen tragbaren Laptop integrieren, was für die Steuerung von Robotern oder Drohnen ideal ist. Die eingebaute Tastatur, das Touchpad und der Bildschirm ermöglichen eine direkte, mobile Kontrolle und Interaktion mit dem Roboter, ohne dass externe Monitore oder Eingabegeräte erforderlich sind.
IoT-Entwicklungsprojekte: Der CrowPi L bietet die Möglichkeit, IoT-Devices (Internet of Things) zu entwickeln und zu testen, indem er eine mobile Plattform bereitstellt, die über den Raspberry Pi auf verschiedene Sensoren und Aktoren zugreifen kann. Die einfache Integration von GPIO-Modulen und der mobile Betrieb sind hier von Vorteil.
Programmierkurse und Workshops: Der CrowPi L eignet sich hervorragend für den Einsatz in Programmierschulungen, Workshops oder Hackathons, bei denen Teilnehmer ihren eigenen Laptop zur Hand haben. Der integrierte Bildschirm und die Tastatur bieten eine sofort einsatzbereite Entwicklungsumgebung für das Lernen von Programmiersprachen wie Python.
Heimautomation: Mit der tragbaren, autarken Lösung können Maker ihre Heimautomationsprojekte direkt vor Ort konfigurieren und testen. Der Laptop kann als mobile Steuerzentrale für Smart-Home-Geräte oder als Hub für verschiedene Sensoren und Geräte genutzt werden.
Spieleentwicklung und -programmierung: Maker, die eigene Spiele oder interaktive Anwendungen entwickeln möchten, können den CrowPi L als vollwertige Entwicklungsumgebung verwenden. Der Bildschirm und die Eingabemöglichkeiten machen es einfach, Spiele direkt zu programmieren, zu testen und zu spielen.
Multimedia-Projekte: Der CrowPi L eignet sich gut für Projekte, die die Medienwiedergabe betreffen, wie zum Beispiel digitale Bilderrahmen, Media Center oder interaktive Displays. Die Fähigkeit, das System ohne externe Geräte zu betreiben, macht es einfacher, solche Projekte zu realisieren.
Prototyping und Produktentwicklung: Maker, die an der Entwicklung von Hardware-Projekten oder elektronischen Geräten arbeiten, profitieren von der mobilen und flexiblen Natur des CrowPi L. Die Integration des Raspberry Pi in ein Laptop-Design ermöglicht eine kompakte Entwicklungsumgebung für Prototypen und Tests.
(Dieser Artikel hat ein schwarzes Tastatur-Layout)
Einige Maker haben es geschafft, den Raspberry Pi 5 erfolgreich in das CrowPi L zu integrieren, obwohl das Design des Laptops für den Raspberry Pi 4B ausgelegt ist. Diese Integration erfordert jedoch einiges an Kreativität und Eigenleistung. Es müssten Anpassungen am Gehäuse vorgenommen werden, wie das Schneiden von Öffnungen und das Entfernen von störenden Komponenten wie den USB-Adaptern. Zudem wurden zusätzliche Löcher für PCIe-Adapter gebohrt und Clips für die Befestigung des Boards 3D-gedruckt.
Obwohl die Integration des Raspberry Pi 5 technisch möglich ist, wird diese Vorgehensweise nicht empfohlen, da sie den Laptop von seinem ursprünglichen Design entfernt und möglicherweise die Funktionalität oder Stabilität beeinträchtigt. Wer diese Modifikationen vornehmen möchte, muss über die nötigen Werkzeuge und Fertigkeiten verfügen. Kurz gesagt: Es ist mit viel Eigeninitiative und Aufwand umsetzbar, aber nicht ohne Einschränkungen und potenzielle Risiken. Wer bereits einen Raspberry Pi 4B zu Hause hat, sollte diesen verwenden, ohne zusätzliche Anpassungen vornehmen zu müssen.
Kombiniere den CrowPi L mit dem Crowtail Starter Kit (nicht enthalten) oder einem CrowPi L Base Shield (nicht enthalten)
(Dieser Artikel hat ein schwarzes Tastatur-Layout Crowtail Starter Kit ist nicht enthalten)
Merkmale im Überblick
11,6 Zoll Bildschirm (1366*768), integrierte Tastatur mit Touchpad
Tastatur Farbe: Schwarz
40P GPIO-Schnittstelle zur Erstellung verschiedener Projekte
96 kostenlose Programmierkurse für Anfänger
Eingebaute 5000mAh-Batterie, die das Gerät für 3 Stunden unabhängig arbeiten lässt
Unterstützt HDMI-kompatible externe Monitore
Dual-System-Umschaltadapterplatine, unterstützt zwei Trans-Flash-Karten
Magnetische Montage für schnelle und einfache Installation des Raspberry Pi
Kompatibel mit Raspberry Pi 4B (nicht kompatibel mit Raspberry Pi 3)
Technische Daten
Bildschirm: 11,6 Zoll, 1366*768 IPS
Batteriekapazität: 5000mAh
GPIO-Schnittstelle: 40 Pin
Unterstützung für externen Monitor: HDMI-kompatibel
Kompatibel mit: Raspberry Pi 4B
Unterstützte Betriebssysteme: Raspberry Pi OS, Ubuntu, Kali Linux
Sonstige Daten
Programmierkurse: Python, Hardware-Kontrolle, Spielentwicklung
Programmiersprachen: Python, Letscode (Grafische Programmierung)
Lieferumfang
1 x CrowPi L (ohne Raspberry Pi Board)
4 x Messing-Abstandshalter-Schrauben
4 x Schrauben
1 x 2-in-1 TF-Karten-Adapterplatine
1 x GPIO-Adapterplatine mit Lüfter
1 x 32GB TF-Karte mit angepasstem System
1 x 12V/2A Netzteil
1 x 2,4G Wireless-Maus mit Empfänger
1 x Benutzerhandbuch
Passendes Zubehör (nicht enthalten)
Elecrow CrowTail Starter Kit
Elecrow CrowPi L Base Shield
Elecrow CrowPi L Breakout Board
Raspberry Pi 4B
Links
Benutzerhandbuch
Wiki
FCC Certificate
CE EMC Certificate
ROHS Certificate
CrowPi L OS image - Google Drive
Available · 15 piece · 1-3 days
Raspberry Pi 3 Model B+
€39.90
The Raspberry Pi 3 Model B+ is the latest version of the Raspberry Pi 3 Model B.
More processor speed. The 4-core CPU of the Model B+ operates at 1.4 GHz, approximately 20% faster than the Raspberry Pi 3 Model B.
Improved network functionality. In addition to the 2.4 GHz wireless LAN, the Model 3 B+ now also has the option of communicating with 5 GHz WLAN networks. Furthermore, the board is equipped with a Gigabit Ethernet port and the Bluetooth standard 4.2/BLE.
PoE ready. The Raspberry Pi Model B+ is ready to be supplied with power via the Ethernet port using an optionally available PoE HAT.
Technical data
Processor
Broadcom BCM2837B0 Chipset
64 bit Quad Core ARM Cortex-A53 @ 1.4 GHz
Memory
1 GB LPDDR2
Connectivity
2.4 GHz and 5 GHz IEEE 802.11 b/g/n/ac Wireless LAN
Bluetooth 4.2 BLE
Gigabit Ethernet (via USB 2.0 bridge, maximum data throughput limited to 300 Mbps)
4x USB 2.0 port
Access
40 pin GPIO header
Picture & sound
1x HDMI type A connection
MIPI DSI display port
MIPI CSI camera port
Combined 3.5mm 4-pin jack socket for analogue audio and composite video
Multimedia
H.264, MPEG-4 decode (1080p30); H.264 encode (1080p30); OpenGL ES 1.1, 2.0 graphics
SD card support
Micro SD format for loading the operating system and as data storage
Power supply
5V/2.5A DC via micro USB type B socket
5V DC via GPIO header
Power over Ethernet (PoE) - requires an optionally available PoE HAT
Dimensions
85 x 56 x 17 mm
Drill hole diameter: 2.75mm
Note:
Please note that the Raspberry Pi 3 model B+ is not compatible with images prior to 13 March 2018!
Available · 100+ piece · 1-3 days
Skip product gallery
Cutsomers also bought
DFRobot Gravity Linear Analogue Hall Sensor, +-1200 GS, bipolar detection, PH2.0-3P, 3.3-5V
€2.50
Gravity: Linear / Analogue Hall Effect Sensor with ±1200 GS magnetic field range
Are you looking for a high-precision sensor for measuring and monitoring magnetic fields? The Gravity: Linear/Analogue Hall sensor is exactly what you need! With advanced Hall-effect circuitry, it converts magnetic induction strength directly into voltage. Its high sensitivity makes it ideal for industrial controls, scientific research, security systems and numerous electronic devices. Thanks to bipolar detection, it recognises both N- and S-pole magnetic fields and therefore offers a wide range of applications. The sensor has low noise generation, which minimises interference, and a stable current source output, which guarantees precise measurement results. An in-built LED display shows you the operating status immediately. It is also compatible with Arduino, micro:bit and UNIHIKER. Rely on reliable performance and precise measurements - the Gravity: Linear/Analogue Hall sensor is the perfect addition to your projects!
Features at a glance
Bipolar detection: Can detect N (north) and S (south) pole magnetic fields, expanding the range of applications.
Low noise level: The integrated circuit offers low noise generation, minimising interference.
Single current source output: Stable output signals are maintained, less susceptible to voltage fluctuations, ensuring accurate measurement results.
Built-in LED indicator: When a magnetic field is detected, the built-in LED indicator lights up, allowing users to monitor the operating status at a glance.
Compatibility
The sensor is compatible with Arduino, micro:bit and UNIHIKER.
Technical specifications
Operating voltage: 3.3~5V
Current consumption: 4.2-8 mA
Magnetic field range: ±1200 GS
Built-in LED indicator
Detection distance: ＜1cm (specific detection distance depends on the intensity and direction of the magnetic field)
Data type: Analogue
Interface type: PH2.0-3P
Dimensions: 27x32mm
Product weight: 3.5g (total weight including packaging and sensor cable is 12g)
Magnetic pole range
micro:bit and Arduino (S pole): 520-1023
micro:bit and Arduino (N pole): 0-500
UNIHIKER (S pole): 2068-4095
UNIHIKER (N pole): 0-2028
Scope of delivery
1x Gravity: Linear/Analogue Hall sensor
1x Gravity: Analogue sensor cable for Arduino - 30cm
Links
Wiki
Diagram
Drawing
Please note
Arduino, micro:bit or UNIHIKER are not included!
Available · 4 piece · 1-3 days
RFID reader with SPI interface incl. card & dongle
€2.40
With this set it is possible to read and write RFID cards with the Raspberry Pi, for example. The scope of delivery already includes 2 RFID transponders!Technical data:Operating voltage: 3.3VCurrent consumption during operation: 13-26mA / peak: <30mACurrent consumption in standby: 10-13mAOperating frequency: 13.56 MHzCard reading distance: 0 - 60mmProtocol: SPIData transmission frequency: Max. 10 Mbit / sDimensions: 40 x 60 mmOperating temperature: -20 ~ 80°C Scope of delivery:1x RFID module1x blank standard card1x transponder in the form of a key fob2x pin header (1x straight, 1x 90° angled)
Available · 37 piece · 1-3 days
Breadboard with 830 contacts
€1.90
Breadboard with 830 contacts This breadboard enables simple circuits to be built quickly and supports experimental projects in electronics and electrical engineering. It is made of high-quality ABS plastic and has 830 contacts. The dimensions are 165 x 55mm with a grid of 2.54mm. It has double-sided adhesive tape on the back for easy mounting and latches on the sides to connect multiple boards. Features at a glance
830 contacts - Offers extensive connection options for components.
Pitch: 2.54mm - Standard dimension for compatible plug-in options.
Mounting: Double-sided adhesive tape - Simple and stable mounting.
Technical data
Number of contacts: 830
Dimensions: 165 x 55mm
Grid dimension: 2.54mm
Material: ABS plastic
Mounting option: Double-sided adhesive tape on the back
Can be plugged together: Latches for connecting several boards
Scope of delivery
1 x breadboard with 830 contacts
Available · 57 piece · 1-3 days
Elecrow Crowtail-Thumb Joystick 2.0, 2x10k Ohm potentiometer, pushbutton, JST-PH 4-pin, 5V, 3.3V
€2.50
Elecrow Crowtail-Thumb Joystick 2.0
The Crowtail-Thumb Joystick 2.0 is an analogue joystick that is compatible with the Crowtail platform. It is similar to the joystick of a PlayStation 2 (PS2) controller and uses two potentiometers with a resistance of 10 kΩ each to detect the direction of movement. The module also has an integrated pushbutton that can be used for special applications.
During operation, the module outputs two analogue values that represent the directions of movement. The output values are in a somewhat limited range (e.g. 200-700) compared to conventional joysticks. When the button is pressed, the output value reaches approximately 1023, allowing a microcontroller to recognise the actuation. The module is compatible with 5V and 3.3V systems. Thanks to the integrated JST-PH 2.0 4-pin connector, the sensor can be easily and securely connected to microcontrollers or other compatible systems. The JST connector ensures a stable connection and facilitates integration into existing crowtail or DIY projects.
Features at a glance
Analogue joystick module for crowtail platform
Two potentiometers for motion detection
Integrated push button for additional functions
Analogue output for motion values
Compatible with 5V and 3.3V systems
JST-PH 2.0 4-pin connector for secure and stable connections
Compatibility with
Crowtail systems
Arduino
Raspberry Pi with analogue inputs
Technical specifications
Connection mode: I (A4, A5)
Resistance: 10 kΩ per potentiometer
Analogue output (maximum value when button is pressed: approx. 1023)
Operating voltage: 5V / 3.3V
Dimensions: 40.0 mm x 27.0 mm x 40.0 mm
JST-PH 2.0 4-pin connection
Other data
Movement values in the range of approx. 200-700
Scope of delivery
1x Crowtail-Thumb Joystick
1x Crowtail 4-pin cable
Links
Joystick circuit diagram
Joystick programme data
Wiki page for the Crowtail-Thumb Joystick
Available · 8 piece · 1-3 days
Elecrow crowtail cable, JST-PH 2.0 4-pin connection cable for modules, 20.5 cm, 5 pieces
€1.50
Elecrow crowtail cable, JST-PH 2.0 4-pin connection cable
A 4-pin crowtail cable is used to connect modules to a main control board. It enables signal transmission and power supply within a crowtail system. The cable is equipped with a JST-PH 2.0 4-pin connector and enables a stable and reliable connection between compatible components. The modular design eliminates the need for soldering, making integration into existing systems easier.
Crowtail is a modular electronics system for connecting sensors, actuators and microcontrollers. It enables a standardised connection via pre-assembled cables and connectors. This 4-pin cable ensures that the modules can be used without additional soldering or complex cabling.
The cable is often used to connect input and output modules with control boards in the Arduino, DIY electronics or training systems sector. The simple handling reduces installation effort and configuration errors.
The product is used to establish electrical connections between compatible components of a crowtail system. It has a 4-pin JST-PH 2.0 connector that transmits signals and power. It is typically used in electronic projects or training systems where a fast, solder-free connection between sensors, actuators and microcontrollers is required.
Overview of features
4-pin connection for crowtail modules
Compatible with crowtail systems
Enables simple connection without soldering
Length: 20.5 cm
Compatibility
Suitable for crowtail modules
Compatible with crowtail-compatible microcontrollers
Technical specifications
Cable length: 20.5 cm
4-pin connector
Other data
Connection cable for modular electronic systems
Scope of delivery
5 x 4-pin crowtail cable
Available · 73 piece · 1-3 days
Stranded copper wire insulated, 1x0.14mm, 10m
€1.20
Insulated stranded copper wire, 10 mSingle-core copper cable, stranded (18x 0.1 mm)Unassembled stranded wire with a core cross-section of 0.14 mm² (AWG 26) and an outer diameter of 1.1 mmAs a flexible stranded cable with PVC insulation, it is particularly suitable for wiring electrical devices or assemblies, e.g. household appliances or measuring devicesIdeal for use as an electrical conductor in model making, e.g. for model railways (suitable for all track gauges)Excellent heat and cold resistanceCan be connected with wire end ferrules, spring and screw terminalsConductor construction (Cu): 18x 0.1 mmTechnical dataConnection 2, type: loose cable endsConnection, type: loose cable endsInner conductor, core cross-section: 0.14 mm²Cable length: 10 m
Available · 73 piece · 1-3 days
Stacking header for Raspberry, 2x20=40 poles, RM 2.54
€1.60
This stacking header provides space between the Raspberry Pi and expansion boards.
Technical data
2 pin rows with 20 pins each=40 pins
Pin spacing (pitch): 2.54 mm
Pin height (without spacer): 15.5 mm
Pin thickness: approx. 0.65 x 0.35 mm
gold-plated contacts
Available · 43 piece · 1-3 days
Prototyping HAT for Raspberry Pi
€4.50
With this prototyping board for Raspberry Pi, breadboard assemblies can be permanently transferred to a circuit board.Technical data40 pin GPIO supportStrip for tapping the GPIO ports (labelled with assignment)Headers for tapping GND, 5V, 3.3V2.54mm pitchSocket for 8-pin ICHAT compatible sizeDimensions: 66 x 57mmContentsPrototyping Board2x20 pin female headerScrews / mounting kit
Available · 100+ piece · 1-3 days
Socket connector, 2x 20-pin, RM 2.54, H 8.4, straight
€0.45
Socket connector, 2x 20-pin, RM 2.54, H 8.4, straight
This socket connector offers a reliable solution for connections in your electronic projects. With 2 rows of 20 sockets each and a pin spacing of 2.54 mm, it is ideal for a wide range of applications. The socket height is approx. 8.5mm, while the pin height measures approx. 3mm.
Features at a glance
Versatility: 2 rows of 20 sockets offer a wide range of applications.
Standard dimension: 2.54mm pin spacing ensures compatibility with numerous components.
Technical data
2 rows with 20 sockets
2.54mm pin spacing
Socket height: approx. 8.5mm
Pin height: approx. 3mm
Scope of delivery
1x socket strip, 2x 20-pin, RM 2.54, H 8.4, straight
Available · 88 piece · 1-3 days
New
official Raspberry Pi USB-C power supply 5.1V / 3.0A, EU, white
€7.90
Official power supply for Raspberry Pi 4This Raspberry Pi Foundation-approved power supply has been specially developed for the Raspberry Pi 4. It has an integrated cable with a USB Type-C connector and provides reliable power for your Raspberry Pi.The power supply is ideal for your Raspberry Pi. It offers a 1.5 metre long cable with USB type C plug and reliable power. The protection against short circuit, overload and overvoltage ensures safe use. The "Class II" certification means that the power supply is extra safe as it has been double insulated, providing additional protection against electric shocks. The "ERP level 6 efficiency" stands for high energy efficiency, which means that the power supply wastes less energy and is more environmentally friendly. Perfect for use with the Raspberry Pi 4.Features at a glanceDesigned for Raspberry Pi 4Integrated cable with USB type C plugProtection against short circuit, overload and overvoltageLow standby power consumptionDouble insulated according to class IILevel 6 ERP efficiencyColour: WhiteTechnical specificationsPower supply unit: 3.0A / 5.1VCable length: 1.5 mInput: EU Euro plugOutput: USB Type C plugCompatibilityFully compatible with the Raspberry Pi 4Scope of delivery1 x Official Raspberry Pi power supply
Available · 100+ piece · 1-3 days
Perforated grid board 5x7cm with copper overlay on one side
€0.30
Perforated grid PCB with copper layer on one side for building circuits.Technical datacopper layer on one sideCoordinate labelling on both sidesGrid dimension: 2.54 mm24 x 18 rowsDrill hole: 1 mmDimensions: 70 x 50 x 1 mm4 holes for screw mounting (diameter: 1.5 mm)
Available · 94 piece · 1-3 days
Micro USB cable with open cable end for power supply
€1.20
Micro USB 2.0 for power supply
Micro B plug > open cable end
Cable USB Micro B plug to open, tinned cable end.
Universal Can be used to power e.g. smartphones, tablets or Raspberry Pi.E.g. smartphones, tablets or Raspberry Pi.
Colour: black
Inner conductor: 2x AWG 22 copper
Assignment: 2-pin (only for power supply) red + / black -
Available · 100+ piece · 1-3 days
Skip product gallery
More Products from +++ Elecrow +++ to look at
Elecrow 2.4G WiFi-Antenne, 4dBi, 50 Ohm, Frequenz 2400-2500 MHz, -40°C bis +65°C
€0.90
Available · 2 piece · 1-3 days
Elecrow 8mm waterproof Android OTG endoscope HD CMOS camera, 6 LED lights, 5m cable, IP67
€14.90
Currently not available
%
Elecrow aircraft lighting system with Attiny85 microcontroller, LED navigation lights, 5V
€21.90
€24.90
(12.05% saved)
Available · 1 piece · 1-3 days
Elecrow aluminium rotary knob, illuminated ring, for RGB encoder, aluminium, 22.20 mm, black
€3.90
Available · 18 piece · 1-3 days
Elecrow aluminium rotary knob, illuminated ring, for RGB encoder, aluminium, 22.20mm, silver
€3.90
Available · 3 piece · 1-3 days
Elecrow Automatic Plant Watering Kit 2.1, Arduino based, for up to 4 plants
€64.90
Currently not available
Elecrow Can-Bus Shield, Arduino Mega/Leonardo compatible, CAN V2.0B, 9-pin Sub-D, Micro-SD, V1.5
€7.90
Currently not available
Elecrow CQA240327P Lora RFM95 IOT Board für RPI, Crowtail, 915MHz, 20dBm, LoRa Modem, I2C, 120mA, 5V
€8.90
Currently not available
Elecrow CrowPanel E-Paper HMI Display, 1.54 inch, 152x152 resolution, ESP32-S3, SPI, black and white
€16.90
Available · 36 piece · 1-3 days
Elecrow CrowPanel E-Paper HMI Display, 2.13 inch, 122x250 resolution, ESP32-S3, SPI, black and white
€17.90
Available · 21 piece · 1-3 days
Elecrow CrowPanel E-Paper HMI display, 2.9 inch, 128x296 resolution, ESP32-S3, SPI, black and white
€23.90
Currently not available
Elecrow CrowPanel E-Paper HMI Display, 3.7 inch, 240x416 resolution, ESP32-S3, SPI, black and white
€30.50
Available · 2 piece · 1-3 days
Elecrow CrowPanel E-Paper HMI Display, 4.2 inch, 400x300 resolution, ESP32-S3, SPI, black and white
€36.90
Available · 3 piece · 1-3 days
Elecrow CrowPanel E-Paper HMI Display, 5.79 inch, 272x792 resolution, ESP32-S3, SPI, black and white
€37.90
Currently not available
Elecrow CrowPi L Base Shield, GPIO-Schnittstelle, ADC-Chip, SPI, Acrylgehäuse, für Crowtail-Module
€11.90
Available · 10 piece · 1-3 days
Elecrow CrowPi L Raspberry Pi Laptop, 11,6 Zoll Display, 40-Pin GPIO, 5000mAh Akku, ohne Pi, QWERTY
€249.90
Available · 15 piece · 1-3 days
Elecrow Crowtail Base Shield 2.0 for Arduino, I2C UART Analogue Digital, 4-Pin JST, 3.3-5V
€4.50
Available · 10 piece · 1-3 days
Elecrow Crowtail Base Shield 2.0 for Raspberry Pi, UART I2C Analogue Digital, MCP3008
€6.90
Available · 29 piece · 1-3 days
Elecrow crowtail cable, JST-PH 2.0 4-pin connection cable for modules, 20.5 cm, 5 pieces
€1.50
Available · 73 piece · 1-3 days
Elecrow Crowtail Collision Sensor 2.0, contact sensor for collision detection, JST-PH 4-pin, 3.3-5V
€1.60
Available · 11 piece · 1-3 days
Elecrow Crowtail connector JST-PH 2.0, 4-pin, 2.0mm pitch, without cable, 10 pieces
€1.00
Currently not available
Elecrow Crowtail encoder 2.0, incremental encoder, 20 pulses/revolution, JST-PH 4-pin, 5.0V
€2.50
Currently not available
Elecrow Crowtail gas sensor MQ3, alcohol gas detection, analogue output, JST-PH 2.0 4-pin, 3W, 5V
€5.90
Available · 4 piece · 1-3 days
Elecrow Crowtail infrared sensor, adjustable, 3-50cm detection, JST-PH 2.0 4-pin, 100mA, 5V
€6.50
Available · 9 piece · 1-3 days
Elecrow Crowtail laser pointer 2.0, compatible with Crowtail base module, 5mW, 650nm wavelength
€1.90
Currently not available
Elecrow Crowtail MOSFET 2.0, fan control, switching voltage 5-50V DC, control voltage 5V
€1.90
Currently not available
Elecrow Crowtail NFC 2.0, RFID reader and NFC module with PN532, 13.56 MHz, UART and IIC protocol
€13.90
Currently not available
Elecrow Crowtail Protoboard 2.0, breadboard, 4-pin cable, S0 S1 VCC GND, 2.54mm pitch
€0.90
Currently not available
Elecrow Crowtail Relay 2.0, JST-PH 4-pin, SPST, 5V control, 30A switching capacity, 240VAC, 30VDC
€1.90
Currently not available
Elecrow Crowtail RGB LED 2.0, 4x WS2812B, addressable, cascadable, JST-PH 2.0, 5V
€1.90
Available · 2 piece · 1-3 days
Elecrow Crowtail RTC module DS1307, calendar function, I2C, JST-PH 4-pin connector, 5V
€2.70
Currently not available
