GPS/GNSS Antenne, magnetisch, SMA-Stecker, 3m

Technical Data Connection / plug: U.FL (IPX) / SMA socket Operating temperature: -20°C to +65°C Cable length: approx. 20 cm

Do you use your Raspberry Pi 5 without a housing under heavy load? The Active Cooler ensures smooth operation and optimum performance. The Active Cooler offers an efficient cooling solution for Raspberry Pi 5 users who use their device without a housing under sustained high loads. It combines a large metal heat sink with a continuously adjustable fan, which is also supplied with power and controlled via the fan connector. It is easily attached using spring-loaded pins in the two mounting holes provided on the Raspberry Pi 5 board. This keeps your Raspberry Pi 5 in top form at all times. Note: A Raspberry Pi 5 is not included in the scope of delivery.

It's 10pm, do you know where your Raspberry Pi is? If you had this GPS HAT, you would know! This new HAT from Adafruit adds our famous Ultimate GPS so you can add precise time and location tracking to your Raspberry Pi model Pi 3, Pi Zero, A+, B+, or Pi 2, 3, & 4. Here's the key information about the GPS module: -165 dBm sensitivity, 10 Hz updates, 99 search channels GPS + GLONASS support Built-in real-time clock (RTC) - a CR1220 backup battery will keep time for 7 years or more, even when the Raspberry Pi is switched off! PPS output on Fix, connected to pin 4 by default Internal patch antenna that works well when used outdoors + u.FL connector for external active antenna when used indoors or in places without a clear view of the sky Fix status LED flashes to indicate that the GPS has determined the current coordinates ...all for under $30! We've designed a HAT based on our Ultimate GPS, added a button cell holder for RTC use, cutouts for all the extra pins on the Raspberry Pi, and plenty of prototyping space to add LEDs, sensors, and more. Please note that this HAT takes over the hardware UART of the Raspberry Pi to send/receive data to and from the GPS module. So if you need to use the RX/TX pins with a console cable, you cannot use this HAT. Instead, you will need to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect to your Pi over the network. Read our tutorial for more information on using this fine HAT Please note that the original module we used has been discontinued by the manufacturer as of July 2021.we have found and are usingan almost identical version of the module - it is slightly larger (4mm) but has the same functionality. The commands for interrogating the antenna have changed slightly, so existing projects may need to update their software if they are running antenna detection. Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to connect the 2x20 GPIO header to the HAT, but it's quick and easy for anyone with a soldering iron and solder. To simplify air shipping, this HAT does not come with a 12mm coin cell! You can use the real-time clock function of the GPS HAT with a CR1220. Scope of delivery GPS Hat Socket connector

ESP32-H2 microcontroller development kit The ESP32-H2 microcontroller development kit is an outstanding platform for anyone who wants to enter the world of smart home automation, industrial automation or medical technology. With its user-friendly RISC-V microcontroller development board that supports Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread), it offers numerous possibilities for advanced electronics projects. Why choose the ESP32-H2 development kit? Powerful architecture: At the heart of the ESP32-H2 is a RISC-V processor. This architecture is known for its openness and customisability and allows you to make your code more efficient and transparent. With an impressive speed of up to 96 MHz, this processor provides a robust foundation for demanding projects. Advanced connectivity options: The ESP32-H2 sets new standards in wireless communication. With support for Bluetooth 5 and IEEE 802.15.4, it is a perfect match for state-of-the-art protocols such as Zigbee 3.0 and Thread. These technologies not only provide fast and reliable connections for a wide range of devices, but are also energy efficient, making them ideal for smart home and industrial automation environments. Matterover Thread - The gateway to the future of smart home technology: Matter is the latest standard designed to simplify communication between smart home devices from different manufacturers. 'Matter over Thread' uses the Thread network protocol to establish secure and reliable connections between devices. The ESP32-H2 development kit is perfectly equipped to introduce you to this cutting-edge technology. Why is the ESP32-H2 development kit important to you? The kit is more than just a microcontroller; it's a stepping stone to a world where the environment is smarter and more interactive than ever before. Imagine a home that responds to your needs, a factory that works more efficiently, or healthcare devices that provide more accurate data - it's all possible with the ESP32-H2. Easy integration into existing systems thanks to pin compatibility with other ESP32 boards and user-friendly USB and UART interfaces make it easy to get started and upgrade. Bring your ideas to life: With the ESP32-H2 development kit, there are no limits to your creativity. Whether you're aiming for simple DIY projects or complex network solutions, this kit gives you the tools you need to realise your projects and turn technological dreams into reality. Immerse yourself in the world of microcontrollers with the ESP32-H2 and experience a future-proof platform for your creative and technical projects. Features at a glance Utilises ESP32-H2-MINI-1-N4 module with RISC-V 32-bit single-core processor, up to 96MHz main frequency, built-in 4MB Flash Integrated wireless communication with Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread), with excellent RF performance USB Type-C connector The integrated CH343 and CH334 chips fulfil the requirements of USB and UART development via a Type-C interface Extensive peripheral interfaces compatible with the pinout of the ESP32-H2-DevKitM-1 development board offer high compatibility and expandability Laminated module enables direct soldering on carrier boards Technical data Processor: RISC-V 32-bit, up to 96MHz main frequency Memory: 4MB Flash Wireless communication: Supports BLE, Zigbee and Thread Interfaces: SPI, UART, I2C, I2S, LED PWM, ADC USB development: CH343 and CH334 USB HUB chips onboard, USB-C connection Dimensions: 51.60 mm x 25.40 mm Other data Supports ESP-IDF and Arduino Comprehensive SDK, development resources and tutorials for quick familiarisation Scope of delivery 1x ESP32-H2-DEV-KIT-N4 2x 40PIN pin header (black) Links to Wiki

Überwache die Temperatur und Feuchtigkeit in verschiedenen Räumen. Der Sonoff-Sensor liefert präzise Messwerte, die alle 5 Sekunden aktualisiert werden. Zudem ermöglicht er die Fernüberwachung der Temperatur in Echtzeit und sendet Benachrichtigungen in der App, wenn der festgelegte Temperaturwert überschritten wird. Darüber hinaus speichert er Daten in der Cloud, sodass du bequemen Zugriff auf deine Messungen hast.Vielfältige Anwendungen Der Sonoff-Sensor ist ideal für Räume mit einer Fläche von bis zu 120 Quadratmetern geeignet. Das Produkt kann in Bereichen wie Terrarien, Weinkellern, Musikläden, Inkubatoren, Gewächshäusern usw. eingesetzt werden. Auch im eigenen Zuhause, beispielsweise im Kinderzimmer, ist er gut verwendbar.Hohe Genauigkeit Das Gerät ist mit einem Schweizer Hygrostat ausgestattet, der Temperatur und Feuchtigkeit mit einer Genauigkeit von ±0,2°C/RH misst. Die Messwerte werden alle 5 Sekunden aktualisiert, sodass du immer auf dem neuesten Stand bleibst. Du kannst die Temperatureinheit auch anpassen, wahlweise °C oder °F.Praktische Bedienung Der Sensor wird über die App gesteuert. Dadurch kannst du problemlos Benachrichtigungen lesen, wenn die Temperatur überschritten wurde. Darüber hinaus kannst du das Gerät über eWeLink zum Home Assistant hinzufügen oder mit anderen Smart-Home-Geräten verwenden. Wenn der Feuchtigkeitswert unter 40% fällt, schaltet sich beispielsweise der Luftbefeuchter automatisch ein. Der Sonoff SNZB-02D unterstützt auch Amazon Alexa und Google Home, sodass du mit einem einfachen Sprachbefehl die Temperatur oder Feuchtigkeit in einem Raum überprüfen kannst.Umfassende Kompatibilität Du kannst den Sonoff SNZB-02D mit einer Vielzahl von Geräten verbinden. Der Sensor unterstützt Zigbee-Gateways, die das 3.0-Protokoll verwenden. Somit ist er mit dem NSPanel Pro Wandschalter, der Sonoff Zigbee Bridge/Pro Smart PBX, dem Sonoff ZBDongle-P/E Dongle und dem Amazon Alexa-System mit integriertem Zigbee-Hub kompatibel.Bequemer Zugang zu Daten Ist es dir wichtig, gespeicherte Messungen abzurufen? Mit dem Sonoff SNZB-02D kannst du bequem darauf zugreifen. Die eWeLink-App ermöglicht es dir, deine Messwerte zu speichern, damit du jederzeit die Messungen einer bestimmten Stunde oder eines ausgewählten Tages überprüfen und anschließend exportieren kannst. Darüber hinaus ist die Messhistorie für sechs Monate verfügbar. Um darauf zuzugreifen, benötigst du neben der App ein Sonoff-Gateway.3 Montagemöglichkeiten Du kannst den Sensor auf 3 verschiedene Arten montieren und somit die für dich passende auswählen. Mit dem integrierten Standfuß lässt sich das Gerät auf einem Schreibtisch oder einer Arbeitsplatte abstellen, um schnellen Zugriff auf die Messungen zu haben. Das magnetische Design erlaubt es dir, den SNZB-02D an einer Metalloberfläche zu befestigen, zum Beispiel an einem Kühlschrank. Es ist auch möglich, den Sensor mit einem 3M-Aufkleber an einer Wand zu befestigen.Technische Daten Hersteller Sonoff Modell SNZB-02D Farbe Weiß Funkverbindung Zigbee 3.0 Betriebsfeuchtigkeit 5-95% RH Material PC + LCD Stromversorgung CR2450 Batterie (3 V) Betriebstemperatur -9.9 - 60°C Batterielebensdauer 2 Jahre Abmessungen 62.5 × 59.5 mm

The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel GNSS receiver powered by the u-blox M9 engine, meaning it can receive signals from the GPS, GLONASS, Galileo and BeiDou constellations with an accuracy of ~1.5 metres. This breakout supports simultaneous reception of four GNSS, maximising positioning accuracy in challenging conditions, increasing precision and reducing lock time. Thanks to the integrated rechargeable battery, you have a backup power supply that allows the GPS to achieve a hot lock within seconds! Additionally, this u-blox receiver supports I2C (u-blox calls this Display Data Channel), making it perfect for Qwiic compatibility so we don't have to use up our precious UART ports. Since we are using our handy Qwiic system, no soldering is required to connect it to the rest of the system. Nevertheless, we have broken out the pins at 0.1" spacing in case you prefer to use a breadboard. The NEO-M9N module detects jamming and spoofing events and can report them to the host so that the system can react to such events. The NEO-M9N module integrates a SAW (Surface Acoustic Wave) filter combined with an LNA (Low Noise Amplifier) in the RF path, which allows normal operation even in the presence of strong RF interference. U-blox-based GPS products are configurable with the popular but dense Windows programme called u-center. Many different functions can be configured on the NEO-M9N: Baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS/D-GPS, etc. All of this can be done within the SparkFun Arduino Library! The SparkFun NEO-M9N GPS Breakout is also equipped with an on-board battery that powers the RTC on the NEO-M9N. This reduces the time to first fix from a cold start (~24s) to a hot start (~2s). The battery maintains the RTC and GNSS orbit data over a long period of time even without power. This product requires an antenna: Take a look at the associated products/connection accessories and select a suitable SMA antenna for your project. Features: Integrated SMA connector for use with an antenna of your choice 92-channel GNSS receiver 1.5m horizontal accuracy 25Hz maximum update rate (four simultaneous GNSS) Time-To-First-Fix Cold: 24s Hot: 2s Max. Altitude: 80.000m Max G: ?4 Max speed: 500m/s Speed accuracy: 0.05m/s Heading accuracy: 0.3 degrees Time pulse accuracy: 30ns 3.3V VCC and I/O Power consumption: ~31mA Tracking GPS+GLONASS Software configurable Geofencing Odometer Spoofing detection External interrupt Pin control Low power mode Many others! Supports NMEA, UBX and RTCM protocols via UART or I2C interfaces Documents: Get Started With the SparkFun NEO-M9N GPS Guide Wiring Diagram Eagle files Board dimensions Connection instructions Structure of a GPS system Data sheet (NEO-M9N) Product overview Integration manual u-blox Protocol Specification NEO-M9M Documents & Resources u-center Software SparkFun u-blox GNSS Arduino Library GitHub Hardware Repo

Nutzen Sie die extreme Geschwindigkeit für schnelle Übertragungen, hohe App-Leistung und Aufnahmen im 4K-UHD-Format. Diese leistungsstarke microSD-Speicherkarte unterstützt 4K-UHD-Videos, Full-HD-Videos und Fotos mit hoher Auflösung. Damit eignet sie sich hervorragend für Android-Smartphones, Actioncams und Drohnen.Technische DatenAllgemeinProdukttypFlash-SpeicherkarteSpeicherkapazität128 GBArbeitsspeicherGeschwindigkeitsklasseA2 / Video Class V30 / UHS-I U3 / Class10LesegeschwindigkeitBis zu 190 MB/sSchreibgeschwindigkeitBis zu 90 MB/sFormfaktormicroSDXC UHS-I SpeicherkarteBesonderheitenStoßfest, wasserfest, röntgenstrahlenbeständig, temperaturbeständigEnthaltener SpeicheradaptermicroSDXC-an-SD-AdapterSoftware / SystemanforderungenSoftware inbegriffenSanDisk RescuePRO Deluxe, SanDisk Memory ZoneAbmessungen und GewichtBreite14.99 mmHöhe10.92 mmDicke1.02 mmUmgebungsbedingungenMin Betriebstemperatur-25 °CMax. Betriebstemperatur85 °C

The SparkFun NEO-M9N GPS Breakout is a high-quality GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel GNSS receiver powered by the u-blox M9 engine, meaning it can receive signals from the GPS, GLONASS, Galileo and BeiDou constellations with an accuracy of ~1.5 metres. This breakout supports simultaneous reception of four GNSS, maximising positioning accuracy in challenging conditions, increasing precision and reducing lock time. Thanks to the integrated rechargeable battery, you have a backup power supply that allows the GPS to achieve a hot lock within seconds! Also, this u-blox receiver supports I2C (u-blox calls this Display Data Channel) which makes it perfect for Qwiic compatibility so we don't have to use our precious UART ports. Since we are using our handy Qwiic system, no soldering is required to connect it to the rest of the system. Nevertheless, we have broken out the pins at 0.1" spacing in case you prefer to use a breadboard. The NEO-M9N module detects jamming and spoofing events and can report them to the host so that the system can react to such events. The NEO-M9N module integrates a SAW (Surface Acoustic Wave) filter combined with an LNA (Low Noise Amplifier) in the RF path, which allows normal operation even in the presence of strong RF interference. U-blox-based GPS products are configurable with the popular but dense Windows programme called u-center. Many different functions can be configured on the NEO-M9N: Baud rates, update rates, geofencing, spoofing detection, external interrupts, SBAS/D-GPS, etc. All of this can be done within the SparkFun Arduino Library! The SparkFun NEO-M9N GPS Breakout is also equipped with an on-board battery that powers the RTC on the NEO-M9N. This reduces the time to first fix from a cold start (~24s) to a warm start (~2s). The battery maintains the RTC and GNSS orbit data over a long period of time even without power. This product requires an antenna: Take a look at the associated products/accessories and select a suitable U.FL antenna for your project. Features: Integrated U.FL connector for use with an antenna of your choice 92-channel GNSS receiver 1.5m horizontal accuracy 25Hz maximum update rate (4 simultaneous GNSS) Time-To-First-Fix Cold: 24s Hot: 2s Max. Altitude: 80.000m Max G: ?4 Max speed: 500m/s Speed accuracy: 0.05m/s Heading accuracy: 0.3 degrees Time pulse accuracy: 30ns 3.3V VCC and I/O Power consumption: ~31mA Tracking GPS+GLONASS Software configurable Geofencing Odometer Spoofing detection External interrupt Pin control Low power mode Many others! Supports NMEA, UBX and RTCM protocols via UART or I2C interfaces Documents: Get Started With the SparkFun NEO-M9N GPS Guide Wiring Diagram Eagle files Board dimensions Connection instructions Structure of a GPS system Data sheet (NEO-M9N) Product overview Integration manual u-blox Protocol Specification NEO-M9M Documents & Resources u-center Software SparkFun u-blox GNSS Arduino Library GitHub Hardware Repo

SONOFF SNZB-02P Temperature & Humidity Sensor Der Sonoff SNZB-02P Temperatur- und Feuchtigkeitssensor bietet präzise Messungen und Smart Home Integration. Mit einer Genauigkeit von ±0,2°C für die Temperatur und ±2%RH für die Luftfeuchtigkeit, überwacht er zuverlässig die Umgebung. Die Daten werden alle 5 Sekunden aktualisiert und in der Cloud gespeichert, sodass Sie historische Daten jederzeit einsehen können. Mit einer Batterielaufzeit von über vier Jahren und der Fähigkeit, bei Überschreiten der Komfortgrenzen Benachrichtigungen zu senden, trägt dieser Sensor zur Verbesserung der Lebensqualität bei. Kompatibel mit Zigbee 3.0 und verschiedenen Gateways, ermöglicht er die einfache Einrichtung von Smart Scenes zur Steuerung von Lüftern und Luftbefeuchtern. Merkmale im Überblick Hohe Präzision: ±0,2°C Temperaturgenauigkeit, ±2%RH Luftfeuchtigkeit. Echtzeit-Datenabfrage: Datenaktualisierung alle 5 Sekunden. Erweiterte Batterielaufzeit: Über vier Jahre Lebensdauer. Cloud-basierte Datenaufzeichnung: Zugriff auf historische Temperatur- und Luftfeuchtigkeitsdaten. Benachrichtigungen: Sofortige Meldungen bei Überschreiten der Komfortgrenzen. Smart Scene: Automatisierung von Lüftern und Luftbefeuchtern basierend auf Temperatur- und Feuchtigkeitswerten. Kompatibilität: Unterstützt Zigbee 3.0 und verschiedene Gateways. Kompatibilität Kompatibel mit Zigbee 3.0-Protokoll und verschiedenen Gateways. Technische Daten Modell: SNZB-02P Drahtlose Verbindung: Zigbee 3.0 Batteriemodell: CR2477 Gehäusematerial: PC Arbeitstemperatur: -10 bis 60 °C Produktabmessungen: 45 x 45 x 17,7 mm Sonstige Daten Temperaturgenauigkeit: ±0,2°C Luftfeuchtigkeitsgenauigkeit: ±2%RH EFR32 MG22C22, SHT40 Lieferumfang 1x SONOFF SNZB-02P Temperatur- und Feuchtigkeitssensor 1x 3M-Klebepads 1x Metallplatte 1x Schrauben 1x Benutzerhandbuch

Raspberry Pi 5 with 8 GB RAM This advanced model impresses with two microHDMI ports that enable outstanding image output. Two USB 3.0 ports and two USB 2.0 ports are available for data transfer. The Raspberry Pi 5 is equipped with a modern USB-C port for the power supply. The dual-band WLAN, which supports both 2.4 GHz and 5 GHz, and Bluetooth 5/BLE ensure outstanding networking capabilities. The Ethernet connection enables rapid data transfers at speeds of up to 1000 Mb/s. The Pi 5 also offers the option of being supplied with power via PoE (Power over Ethernet). All other specifications and features are consistent with those of the Raspberry Pi 4, ensuring continuity and reliability in the Raspberry Pi range. Accessories for the Raspberry Pi 5 To utilise the full potential of your Raspberry Pi 5, we recommend the following accessories: A microSD card, ideally with an operating system already installed. A stable power supply via USB-C, preferably 5V / 5A DC or 27W. A monitor and a suitable HDMI cable. Of course, a keyboard and mouse for easy operation. Product features Raspberry Pi 5 2.4GHz Quad-Core 64-bit Arm Cortex-A76 CPU: The power that will amaze you. VideoCore VII GPU: Enjoy state-of-the-art graphics with support for OpenGL ES 3.1 and Vulkan 1.2. Dual 4Kp60 HDMI output: For razor-sharp displays with HDR support. Up to 8GB LPDDR4X-4267 SDRAM: So that you always have enough RAM available. Dual-band 802.11ac Wi-Fi and Bluetooth 5.0/BLE: For the best connections at all times. The Raspberry Pi 5 offers an impressive variety of connection options 2 × USB 3.0 and 2 × USB 2.0 ports: For all your peripheral devices Gigabit Ethernet: Fast and stable network connections, with up to 1000Mb/s Dual 4Kp60 HDMI: For simultaneous, brilliant screen output And many more, from microSD card slots to GPIO headers 2 × 4-lane MIPI camera / display port PCIe2.0 for future HATs 40 GPIO pin headers: to realise your projects Advantages of the Raspberry Pi 5 The Raspberry Pi 5 is not just another mini-computer. It represents the future: a powerhouse in a compact design that is ready for a wide range of applications - whether for creative projects at home or demanding industrial applications. Can you imagine an everyday life where you are not just a consumer, but also a creator? Where you design technology according to your wishes? The Raspberry Pi 5 takes you there! Advantages of the Raspberry Pi 5 compared to the Raspberry Pi 4 What Raspberry Pi 4 Mod B Raspberry Pi 5 Processor Quad-Core Cortex A72 Quad-Core Cortex-A76 Architecture ARM 64-bit ARM 64-bit Clock frequency 1.5 GHz 2.4 GHz RAM 1GB, 2GB, 4GB, 8GB LPDDR4 2GB, 4GB and 8GB LPDDR4X *) WiFi 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/a Dual-band 802.11ac Bluetooth 5.0, BLE 5.0, BLE USB 2 x USB2.0 2 x USB3.0 2 x USB2.0 2 x USB3.0 with 5Gbps each Decoder H.265 (4Kp60 decode) H.264 (1080p60 decode, 1080p30 encode) OpenGL ES, 3.0 graphics 4Kp60 HECV OpenGL ES 3.1, Vulkan 1.2 LAN Gigabit Gigabit with PoE+ support Input power 5V / 3A DC 5V / 5A DC GPIO 40-pin header 40-pin header New features - RealTimeClock PCIe 2.0 Integrated power button Fan connector Operating system for Raspberry Pi 5 With the Raspberry Pi 5 you have the choice: The official Raspberry Pi OS is available, but other Linux distributions and even Windows 10 ARM64 can also be brought to life on this machine Important notes for the Raspberry Pi 5 Your Raspberry Pi 5 is a powerhouse that should be treated with care. Keep it away from moisture and avoid extremely high or low temperatures. The future has only just begun. With the Raspberry Pi 5, you are perfectly equipped to be at the forefront. Experience the technology you've always wanted! FAQ What is the main difference between the Raspberry Pi 5 and the Raspberry Pi 4? The Raspberry Pi 5 offers improved CPU performance, enhanced graphics options, more RAM and a variety of improved connectivity options and long-awaited features such as RTC or PCIe 2.0, compared to the Raspberry Pi 4. Does the Raspberry Pi 5 support 4K resolution? Yes, the Raspberry Pi 5 supports dual 4K displays via its HDMI ports. What operating systems are compatible with the Raspberry Pi 5? The Raspberry Pi 5 supports a variety of operating systems, including various Linux distributions and Windows IoT Core How much RAM is available in the Raspberry Pi 5? Models with 2 GB, 4 GB and 8 GB RAM are currently available. Does the Raspberry Pi 5 offer support for PoE (Power over Ethernet)? Yes, with an additional PoE+ HAT, the Raspberry Pi 5 can be supplied with power via Ethernet. Separate hardware that supports this in your network is required. What connections does the Raspberry Pi 5 offer? The Raspberry Pi 5 has USB 3.0 and 2.0 ports, Gigabit Ethernet, dual 4K HDMI, microSD card slot, 2 MIPI camera / display ports, PCIe 2.0 and the familiar 40-pin GPIO header. What safety precautions should I take when using the Raspberry Pi 5? The Raspberry Pi 5 should be operated in a well-ventilated area and should not be placed near water sources. It should be firmly secured or placed on a stable, flat, non-conductive surface.