Product number: M5-A014-C M5Stack

M5GO Battery Bottom2 for Core2

€15.90

Available · 2 piece · 1-3 days

€15.90

Order now and secure 32 Berrys

Product information "M5GO Battery Bottom2 for Core2"

M5GO BOTTOM2 is an expansion base for the M5Core2. It contains a MPU6886 6-axis gyro/accelerometer, a digital microphone (SPM1423) and a 500mAh LiPo battery. The base also has 2 HY2.0-4P expansion ports that support ADC/DAC/UART protocols and data input/output and allow the use of devices from the M5Stack range. A total of 10 programmable RGB LEDs (SK6812) are located on both sides of the base under a diffuser, which can be used as notifications or for impressive lighting effects. Underneath the device is a set of pogo pins that can be connected to a charging station (excluded) for charging. The pogo pin connector can also be used for I2C communication. So if the user wants to attach or modify the base to incorporate I2C devices, they can do so. There are a number of Lego-compatible holes on the bottom of the device that make integrating your Lego projects a breeze.

Features

Compatible with M5Core2
Digital microphone
Programmable RGB LED
HY2.0-4P expansion ports
Lego compatible
Pogo pin magnetic charging

Scope of delivery

1x M5GO BOTTOM2
2x M3*16 screws
2x M3*18 screws

M5GO Specifications

Resources	Parameters
Microphone	SPM1423
LED	SK6812*10
IMU	MPU6886
Net weight	31g
Gross weight	45g
Product dimensions	54548mm
Packaging dimensions	605717mm

Documents/Downloads

Documents and tutorials on the M5Stack website

Zolltarifnummer:	84733080
Brand:	M5Stack
Country of Origin:	China
EAN:	6972934172570
Gross Weight (kg):	0.050
Manufacturer ID:	A014-C
Product ID:	M5-A014-C

M5Stack

M5Stack – modular ESP32 development in a stackable system

M5Stack was founded in Shenzhen in 2017 with a simple but powerful idea: development boards that come in a finished enclosure with display, buttons and battery, and that can be extended by stacking modules. The result is a system that takes you from idea to working prototype faster than almost any other.

At the heart of the range are the ESP32-based Core, Stick and Atom controllers, complemented by a large family of Units – compact sensors and actuators that connect via a standardised Grove port. Programming is possible with UIFlow, Arduino or MicroPython.

At BerryBase you will find M5Stack controllers, Units and accessories for IoT projects, teaching and rapid prototyping.

Manufacturer information
M5Stack Technology Co, Ltd
501, 5F, Tangwei Stock Commercial Building, Youli Road, Bao\'an District
CN 518000 Shenzhen
https://m5stack.com
[email protected]

WEEE number: 41403304

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions

Avoid contact with water or other liquids to prevent damage.
Protect the board from extreme heat, direct sunlight and frost.
Only use the product with the recommended power supply or battery to avoid overheating or short circuits.
Take care not to overload the board and ensure that connected peripheral devices comply with the operating specifications.
Switch off the device before adding or removing components.
In the event of damage (e.g. cracks, deformation, odour), take the product out of operation immediately.
Keep the board away from children as it may contain small parts that can be swallowed.
Dispose of electronic components and circuit boards in an environmentally friendly manner. Contact municipal collection points for electronic waste or specialised recycling programmes.
To avoid environmental damage, do not dispose of improperly with household waste.
Always comply with the applicable standards and regulations for handling electronic components.