€25.90
Available · 33 piece · 1-3 days
€25.90*
Product information "MH-Z19C Infrared CO2 sensor, pin header"
Compared to the previous model (MH-Z19B), the preheating time has been reduced from 3 to 1 minute and the power consumption reduced. The sensor calibrates itself every 24 hours (can be switched on and off by command), but a zero-point calibration can also be activated manually.
Technical data:
- Model: MH-Z19C
- Target gas: CO2
- Operating voltage: 5 V DC (±0.1V)
- Average current consumption: < 40mA (@5V)
- Peak current: 125mA (@5V)
- Interface level: 3.3 V (compatible with 5V)
- Measuring range: 400 - 5000 ppm
- Accuracy: ± (40ppm+5% measured value)
- Output signal:
- UART (TTL interface level 3.3V)
- PWM
- Preheating time: 1 minute
- Response time T90 < 120 s
- Operating temperature: -10 - 50 ℃
- Operating humidity: 0 - 95% RH (no condensation)
- Dimensions: approx. 33 × 20 × 17 mm
- Connection: pin header with 2.54 mm pitch
- Scope of delivery: CO2 sensor
| Zolltarifnummer: | 90271010 |
|---|---|
| Brand: | Winsen |
| Country of Origin: | China |
| EAN: | 4251266702610 |
| Gross Weight (kg): | 0.005 |
| Manufacturer ID: | MH-Z19C(Pin) |
| Product ID: | MH-Z19C-PH |
| VPE: | 1 / 50 / 1200 |
Zhengzhou Winsen Electronics Technology Co., Ltd.
NO.299 Jinsuo Road, National High-Tech Zone
CN Zhengzhou
https://www.winsen-sensor.com
[email protected]
Responsible person for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]
Safety instructions
- Use product only in well ventilated areas.
- Avoid direct contact with water or humid environments.
- Read and follow the operating instructions carefully before use.
- Use the sensor away from flammable or explosive materials.
- Ensure connection to a suitable power source in accordance with the specifications.
- In the event of damage or malfunctions, disconnect from the power supply immediately.
- Protect from heat sources and direct sunlight.
- Dispose of in accordance with local regulations for electronic devices and hazardous substances.
- Never touch gas or dust sensors directly with bare hands.
- Do not use for applications in safety-critical systems without additional protective mechanisms.
Login
7 reviews
8 November 2022 00:00
-
-
6 July 2022 00:00
-
-
19 January 2022 00:00
Sensor funktioniert am Rasberr...
Sensor funktioniert am Rasberry Pi ohne Probleme. Einzig der Abstand der PIN-Reihen ist so groß das ich das nur über zwei Mini Breadboards (170 Kontakten) installieren konnte.
30 November 2021 00:00
wie im Datenblatt...
wie im Datenblatt
12 November 2021 00:00
-
-
12 September 2021 00:00
Der CO2-Sensor funktioniert gu...
Der CO2-Sensor funktioniert gut. Die Backgroundcalibration ist etwas umständlicher als z.B. bei Senseair S8, aber dafür ist er auch etwas günstiger. Wichtig ist, das man keines der im Umlauf befindlichen Fakes des Sensors erhält. Deshalb habe ich auch hier bestellt und nicht in China.
2 March 2021 00:00
Guter Sensor hat auf anhieb ge...
Guter Sensor hat auf anhieb geklappt
Customers also bought
Available · 55 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 90 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 70 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 78 piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Available · 100+ piece · 1-3 days
Similar products
Available · 1 piece · 1-3 days
Available · 26 piece · 1-3 days
Available · 92 piece · 1-3 days
Available · 3 piece · 1-3 days
Available · 5 piece · 1-3 days
Available · 6 piece · 1-3 days
Available · 7 piece · 1-3 days
Available · 3 piece · 1-3 days
Available · 5 piece · 1-3 days
Available · 90 piece · 1-3 days
