Keystone System: Modules, Patch Panels & Accessories
Combine keystone modules, patch panels, housings and mounts freely to build your network outlet exactly the way your project needs it.
Content: 4 Stück (€0.15 / 1 Stück)
Content: 4 Stück (€2.38 / 1 Stück)
One cut-out, many modules: network, USB and HDMI behind one faceplate
The keystone system solves a building services problem elegantly: instead of fitting a separate outlet for every kind of connection, there is one standardised cut-out into which you snap whichever module suits. Here you will find keystone modules, patch panels, outlets and the tools to go with them.
The principle
A keystone module always has the same outer dimensions and the same latch, and anything can sit inside. The real advantage follows from that: you plan the faceplate, not the connections. If a network port later has to become a USB pass-through, you change the module and not the outlet. A broken RJ45 contact costs you one module instead of a whole patch panel. And you mix whatever you need behind one faceplate — two network ports, one HDMI, one USB. Unused positions you close with blank modules so no dust falls into the box.
Network modules
The largest part is RJ45 modules, available in CAT 6 and CAT 6A, shielded as STP and unshielded as UTP. Two termination types are on offer: modules with insulation displacement contacts, where the conductors are pushed in with a punch-down tool, and tool-free versions, where a cap presses the contacts home. The tool-free ones are quicker and the more convenient choice for a handful of outlets, while the punch-down version is considered more reliable in the long run. With shielded modules the same applies as with a patch panel: the screen has to be bonded all round and the whole thing earthed, otherwise it acts as an antenna instead of a shield.
Carriers: panel, box, faceplate
Modules need something to sit in. For the cabinet there are 19 inch keystone panels for 24 modules, including a rotatable version, and a 10 inch panel for 12 modules with an earthing wire in one rack unit. For the wall there are surface-mount boxes and two-port outlets, plus empty housings from 12 ports upwards and faceplates in various levels of population. Alongside those sit couplers and pass-through modules for USB-A, HDMI and other signal types — with those you take a display connection through a wall without pulling a cable with a plug on it through the hole.
Tools and small parts
For installation there is a range of its own, from punch-down tools through to the keystone removal tool, which releases a latched module from the faceplate again — without it you will hardly get a module out undamaged. In addition there are RJ45 dust caps for unused sockets, reusable and made of ABS. One planning note: count the positions you need and add one spare per outlet. Extending a faceplate afterwards means opening the box, whereas swapping a blank module for a network module takes two minutes.