seeed Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
Product number: SE-102110497
€68.80
Available · 2 piece · 1-3 days
Product information "seeed Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4 "
The Dual Gigabit Ethernet NICs Carrier Board for Raspberry Pi Compute Module 4 is a versatile, compact board that is ideal for customised network router applications. With two Gigabit Ethernet ports and two USB 3.0 ports, it offers high flexibility and security for your network management. The board supports OpenWrt and allows you to design and manage a powerful local network system yourself.
It has a micro HDMI interface, MIPI CSI and MIPI DSI for camera connections, an FPC connector for I2C and SPI communication and a 4-pin fan connection for heat dissipation. In addition, the micro SD card slot allows the system to boot from the SD card if there is no eMMC memory on the Raspberry Pi CM4. Due to its small size (75x64x21mm) and the rich selection of components, it is perfectly suited for HTPC builders, Linux developers and software router enthusiasts.
Features at a glance
- Compact size (75x64x21mm) with extensive I/O peripherals
- Two Gigabit Ethernet ports for soft router applications
- Camera/display connectivity via MIPI CSI, MIPI DSI and micro HDMI interfaces
- Dual USB 3.0 onboard with additional USB 3.0 9-pin connector for further external ports
- Micro SD card slot for loading system images for CM4 versions without eMMC
- More expansion options via FPC connection (I2C, SPI)
- External fan support with fan power connection
- Power supply via USB Type-C
- LAN7800 from Microchip (USB 3.0 to GbE - Gigabit Ethernet Bridge)
- Networks: Double Gigabit Ethernet ports
- USB: 2x USB 3.0 ports, 1x USB 3.0 9-pin header
- Storage: Micro SD card slot
- Camera: 1x MIPI CSI connection
- Display: 1x MIPI DSI connection, 1x Micro HDMI connection
- FPC: Interface for I2C and SPI
- External fan: Power connection for fan
- Power supply: 5V/3A via USB Type-C connection
- Temperature range: -40°C to +85°C
- Dimensions: 75 x 64 x 21 mm
- Weight: 43g
- 1x Dual Gigabit Ethernet Carrier Board
Note
- Due to the high level of integration of this product, it must be used with a CM4 heat sink (not included). Otherwise USB or Ethernet instabilities may occur.
| Zolltarifnummer: | 85437090 |
|---|---|
| Brand: | seeed |
| Compatibility: | Raspberry Pi Compute 4 |
| Country of Origin: | China |
| EAN: | 5904422346416 |
| Gross Weight (kg): | 0.089 |
| Manufacturer ID: | 102110497 |
| Product ID: | SE-102110497 |
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
[email protected]
WEEE number: 20453810
Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]
Safety instructions
- Only handle the Compute Module in compliance with the ESD protection measures.
- Before connecting to the power supply, ensure that all connections are correct.
- If used in an enclosure, ensure that there is no thermal overload (adequate ventilation).
- Do not operate in damp, wet or very dusty environments.
- Never allow direct contact with water or conductive liquids.
- Only use with the recommended power supply unit (observe the correct voltage and amperage).
- Liquid or overvoltage damage can lead to dangerous situations or defects.
- Avoid prolonged storage without the housing to prevent damage or corrosion.
- Do not repair defective modules or components yourself.
- Recycle defective or disused Compute Modules in accordance with local electronic waste disposal regulations.
Login
2 reviews
3 March 2023 18:50
Hat nicht den vollen GB an eth1 - eth0 ist ok. Wird außerdem sehr heiß. Es gibt hier bessere und günstigere Boards.
Hat nicht den vollen GB an eth1 - eth0 ist ok. Wird außerdem sehr heiß. Es gibt hier bessere und günstigere Boards.
12 August 2022 00:00
-
-