seeed Grove - 16-channel PWM driver (PCA9685)
€15.50
Frequently Bought Together
4 items
Description
Product information "seeed Grove - 16-channel PWM driver (PCA9685)"
The seeed Grove - 16-channel PWM driver (PCA9685) is based on the NXP PCA9685 and is a 16-channel 12-bit I2C PWM driver. This PWM driver can control up to 16 servos with external power supply. If you've ever worried about the limited number of PWM output interfaces on your development board, this product will help! The board can also be used as an LED controller and can be easily controlled via the I2C Grove interface. With 6 hardware address pins, up to 62 PCA9685 devices can be connected to the same I2C bus. Each of the 16 groups of pins (1 - 16) on this board includes a PWM signal pin, a 5V power supply pin and a ground pin.
Features at a glance
- 1 MHz Fast-mode Plus compatible I2C bus
- 6 hardware address pins allow 62 PCA9685 devices to be connected to the same I2C bus
- Low standby power consumption
- Noise filter on SDA/SCL inputs
- 16-channel 12-bit I2C PWM driver
- Based on NXP PCA9685
- Control of up to 16 servos with external power supply
- 6 selectable address pads on the rear panel
- 64 optional and individual I2C addresses
- 16 groups of pins, each group with PWM signal pin, 5V power supply pin and ground pin
- Can also be used as an LED controller
- 1x seeed Grove - 16-channel PWM driver (PCA9685)
- 1x Grove connection cable
Properties
| Zolltarifnummer: | 84733020 |
|---|---|
| Brand: | seeed |
| Country of Origin: | China |
| EAN: | 841454121817 |
| Gross Weight (kg): | 0.020 |
| Manufacturer ID: | 108020102 |
| Product ID: | SE-108020102 |
Manufacturer and safety information
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
[email protected]
WEEE number: 20453810
Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]
Safety instructions
- Only use in dry indoor areas to avoid damage caused by moisture.
- Keep away from direct sunlight or extreme temperatures.
- Ensure that the operating voltage corresponds to the technical specifications.
- Only connect using a suitable cable and plug.
- Protect the product from mechanical damage, vibrations and shocks.
- Always switch off the power supply during installation and maintenance.
- Protect electronic components from electrostatic discharge (ESD).
- Use only by trained personnel.
- Do not repair defective products without authorisation, but dispose of them properly.
- Dispose of batteries or rechargeable batteries in accordance with local regulations.
- Do not dispose of with household waste, but pass it on to certified collection centres.
Reviews 0
Login
Customers also viewed
Content: 10 Meter (€0.19 / 1 Meter)
