Product number: SE-104030001 seeed

seeed Grove - 16x2 LCD RGB Backlight - Full Colour Display

0.5 (1 Review)

€16.50

Available · 50 piece · 1-3 days

Farbauswahl

seeedGrove-16x2LCDRGBBacklight-FullColorDisplay-105126

Vollfarbdisplay, RGB Backlight €16.50 In Stock

Vollfarbdisplay, RGB Backlight In Stock

Schwarz auf Gelb In Stock

Schwarz auf Rot In Stock

Weiß auf Blau In Stock

seeed Grove - Light sensor v1.2 - Phototransistor LS06-S

€2.60

seeed Grove - 5mm LED, red

€1.90

seeed Grove - 16x2 LCD RGB Backlight - Full Colour Display

€16.50

Order now and secure 33 Berrys

Product information "seeed Grove - 16x2 LCD RGB Backlight - Full Colour Display"

Seeed Grove - 16X2 LCD RGB Backlight - Full Colour Display
Grove - 16X2 LCD RGB Backlight is a full colour 16x2 LCD display for Arduino. It offers high contrast and easy handling and is suitable as an I2C LCD display for Arduino and Raspberry Pi.

The traditional 16x2 LCD requires up to 10 I/O pins for display and an additional 3 pins to control the backlight in a 16x2 LCD with RGB backlight. This takes up a lot of I/O resources on the main control board, especially for development boards with limited I/O resources such as Arduino and Raspberry Pi. Grove - LCD RGB Backlight changes this completely. Using the Grove I2C connector, only 2 signal lines and 2 power lines are required. The connection is made directly via the I2C interface of Seeeduino or Arduino/Raspberry Pi with baseboard via the Grove cable. No complicated wiring, no soldering and no risk of damaging the LCD due to incorrect current limiting resistors.

In addition, this LCD module is not only used to display characters, but can also display self-created images such as a heart or a smiley. 16x2 means two rows with 16 columns each, totalling 32 characters. Each character consists of 5x8 pixels.

As the name RGB backlighting suggests, the backlighting can be set to any desired colour. The background colour can be controlled by the program, for example green for a smile and red for an angry face. Alternatively, monochrome LCD variants are available, which also use the simple Grove I2C interface and are more cost-effective.

Grove - 16X2 LCD RGB Backlight is used as a full-colour display that communicates via the I2C interface and enables the display of characters, images or individual graphics. Typical applications include distance displays, temperature displays, game displays and general text and image displays. The minimal wiring effort makes this display particularly suitable for projects with Arduino, Raspberry Pi or other platforms with limited I/O resources.

The display is used to display characters and images, to visualise sensor data, to implement game displays and is suitable for measured value or status displays. It is operated via just two control lines using an I2C connection. The RGB backlighting enables a customisable visual display depending on the desired application.

Features at a glance

Full-colour RGB backlighting
High contrast for good visibility
I2C communication with only two I/O pins
Low power consumption with automatic power-on reset
Grove-compatible connector for plug-and-play

Compatibility with

Arduino
Raspberry Pi

Technical specifications

Dimensions: 83mm x 44mm x 13mm
Weight: 42g (G.W)
Battery: Not included
Input voltage: 5V
CGROM: 10880 Bit
CGRAM: 64x8 bit
Communication: I²C
LCD I2C address: 0x3E
RGB I2C address: 0x62

Scope of delivery

1x Grove - LCD RGB Backlight

Links to

Zolltarifnummer:	85429000
Brand:	seeed
Country of Origin:	China
EAN:	841454108092
Gross Weight (kg):	0.042
Manufacturer ID:	104030001
Product ID:	SE-104030001

seeed

Seeed Studio – open-source hardware from Shenzhen

Seeed Studio was founded in Shenzhen in 2008 and is today one of the most important providers of open-source hardware worldwide. Its mission: making technology accessible to everyone – from students to industrial developers.

Seeed is best known for the Grove system, which lets you combine sensors and actuators via plug connectors without soldering. Add to that the compact XIAO microcontrollers, the Wio Terminal and audio solutions such as ReSpeaker. All products are well documented and backed by an active community.

At BerryBase you will find a large selection of genuine Seeed Studio products – ideal for rapid prototyping, teaching and IoT applications.

Manufacturer information
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
[email protected]

WEEE number: 20453810

Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]

Safety instructions

Avoid direct contact with the electrical contacts to prevent short circuits or damage.
Ensure protection from moisture and water, as these can damage the device.
Only operate with the intended voltage and current to avoid overheating or malfunctions.
Unsuitable cabling or improper installation can cause malfunctions or safety risks.
Before installation and connection, ensure that the power supply is disconnected.
Do not use in potentially explosive atmospheres.
Dispose of in accordance with local electronics recycling regulations.
Do not reuse damaged displays or their individual parts, risk of injury from broken glass or chemical substances.
Direct sunlight or extreme temperatures can impair the functionality of the product.
Do not use aggressive cleaning agents or sharp tools for cleaning.

1 of 1 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

Sort by

1 review

19 August 2023 11:53

funktioniert nicht mit Raspberry PI pico

Vielleicht ist seed grove nicht mit den normalen Pins auf dem Raspberry PI kompatible, ich habe mehrere Beispielprogramme in C und mikropython getestet, kein einziger Buchstabe wurde angezeigt. Das verlinkte Beispiel konnte ich nicht testen, da es nicht für Raspberry PI, sondern Arduina ist.