Product number: SE-101020592 seeed

seeed Grove - High precision I2C temperature & humidity sensor with high accuracy (SHT35)

5.0 (1 Review)

€14.20

Available · 6 piece · 1-3 days

€14.20

Order now and secure 29 Berrys

Product information "seeed Grove - High precision I2C temperature & humidity sensor with high accuracy (SHT35)"

Seeed Grove - I2C High Accuracy Temp&Humi Sensor (SHT35)
The Grove - I2C High Accuracy Temperature and Humidity Sensor (SHT35) is a digital environmental sensor for the precise measurement of temperature and relative humidity. The measurement accuracy is typically ±0.1 °C for temperature and ±1.5 % RH for humidity. The sensor is based on Sensirion's SHT3x-DIS and offers improved accuracy, advanced signal processing and higher reliability compared to previous versions.

The sensor is fully calibrated, linearised and temperature compensated. The output is digital via an I2C interface with transmission speeds of up to 1 MHz. Two different I2C addresses are available: 0x45 (standard) and 0x44 (optional). An integrated alert mode enables the monitoring of programmable limit values for temperature and humidity.

The module supports a wide operating voltage range from 2.15 V to 5.5 V and can be easily integrated into Arduino, Raspberry Pi or other microcontroller-based systems via the Grove interface. It is suitable for applications in medical technology, food monitoring, automotive technology, industrial cooling systems and for general environmental monitoring in indoor and outdoor areas.

Features at a glance

Precise measurement of temperature (±0.1 °C) and humidity (±1.5 % RH)
Digital I2C interface with up to 1 MHz transmission speed
Two selectable I2C addresses: 0x45 (standard) / 0x44 (optional)
Alert mode for monitoring programmable limit values
Fully calibrated and temperature compensated output

Compatibility

Arduino
Raspberry Pi

Technical specifications

Dimensions: 20 mm x 40 mm x 6 mm
Weight: 3.1 g
Operating voltage: 3.3 V / 5 V
Temperature range: -40 °C to +125 °C
Temperature resolution: 0.01 °C
Temperature accuracy: ±0.1 °C
Humidity range: 0 % RH to 100 % RH
Humidity resolution: 0.01 % RH
Humidity accuracy: ±1.5 % RH
Communication interface: I2C
I2C address: 0x45 (standard), 0x44 (optional)

Other data

Battery not included

Scope of delivery

Grove - I2C High Accuracy Temp&Humi Sensor (SHT35)
Grove cable

Links

Zolltarifnummer:	84733020
Brand:	seeed
Country of Origin:	China
EAN:	841454121305
Gross Weight (kg):	0.010
Manufacturer ID:	101020592
Product ID:	SE-101020592

seeed

Seeed Studio – open-source hardware from Shenzhen

Seeed Studio was founded in Shenzhen in 2008 and is today one of the most important providers of open-source hardware worldwide. Its mission: making technology accessible to everyone – from students to industrial developers.

Seeed is best known for the Grove system, which lets you combine sensors and actuators via plug connectors without soldering. Add to that the compact XIAO microcontrollers, the Wio Terminal and audio solutions such as ReSpeaker. All products are well documented and backed by an active community.

At BerryBase you will find a large selection of genuine Seeed Studio products – ideal for rapid prototyping, teaching and IoT applications.

Manufacturer information
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
[email protected]

WEEE number: 20453810

Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]

Safety instructions

Only install and use the sensor in accordance with the manufacturer's recommendations.
Disconnect the power supply before installation or maintenance.
Protect from direct contact with water or moisture.
Do not disassemble or repair independently, as this may impair functionality and safety.
Observe the temperature range of the sensor to avoid damage and malfunctions.
In the event of malfunction or damage, only replace by qualified specialists.
Dispose of used sensors in an environmentally friendly manner in accordance with local regulations.
Dispose of electronic and plastic parts at authorised recycling stations.
Ensure that the sensor does not measure any dangerous temperatures that could cause material damage.