No results were found for the filter!
Article no.: SE-113020011
Article no.: SE-103020007
Article no.: SE-101020063
Article no.: SE-109020022
Article no.: SE-101020023
Article no.: SE-101020174
Grove - Sunlight Sensor is a multi-channel digital light sensor, which has the ability to detect UV-light, visible light and infrared light. It offers excellent performance under a wide dynamic range and a variety of light sources including direct sunlight. Suitable for your Raspberry Pi weather station or smart irrigation system using Arduino if you need to monitor the visible spectrum.
Article no.: SE-101020089
Mit dem SparkFun ATECC608A Cryptographic Co-processor Breakout können Sie Ihrem IoT-Knoten, Edge-Device oder Embedded-System starke Sicherheit hinzufügen. Dazu gehören asymmetrische Authentifizierung, symmetrische AES-128-Verschlüsselung/Entschlüsselung und vieles mehr. Wie bereits erwähnt, hat der ATECC608A eine begrenzte Arduino-Unterstützung und das vollständige Datenblatt steht unter NDA mit Microchip.
Article no.: DEV-18077
Article no.: SE-110990037
Article no.: SE-110070024
Grove - Air quality sensor v1.3 is designed for indoor air quality testing. It can respond to carbon monoxide, alcohol, acetone, thinner, formaldehyde, and other slightly toxic gases. Compatible with 5V and 3.3V power supply, it can work with Arduino and Raspberry Pi. With its long-term stability & low power consumption, it would be a perfect choice for air quality monitoring.
Article no.: SE-101020078
Article no.: SE-101020812
Article no.: SE-101020015
Grove - DHT22 ist ein hochpräziser Temperatur- und Feuchtigkeitssensor, der auf dem DHT22-Modul (auch bekannt als AM2302 oder RHT03) basiert. Durch die hohe Leistung und die hohe Präzision ist er ideal für die Temperatur- und Luftfeuchtigkeitsüberwachung mit Arduino und Raspberry Pi. Der Sensor kann auch als Thermometer und Hygrometer verwendet werden.
Article no.: SE-101020019
Article no.: SE-101020852
Article no.: SE-110070021
Article no.: SE-101020052
Article no.: SE-104030005
The Grove - Light Sensor v1.2 is an analog module and can output various electrical signals which can be converted to different ranges. It integrates LS06-S photoresistor, a high-sensitive and reliable photodiode, to detect the intensity of light in the environment. It is a perfect Arduino light sensor module for light measurement, light detection, and light-controlled switch.
Article no.: SE-101020132
Article no.: SE-113020091
Article no.: SE-113020002
Article no.: SE-104030001
Article no.: SE-101020555
Article no.: SE-104030009
Article no.: SE-110070022
Article no.: SE-104020249
The Grove-VOC and eCO2 Gas Sensor SGP30 is an air quality sensor(Arduino compatible). Based on SGP30, this module provides TVOC(Total Volatile Organic Compounds) and CO2eq output with outstanding long-term stability and low power consumption, which make it a perfect choice for indoor air quality detection.
Article no.: SE-101020512
Article no.: SE-111020103
Article no.: SE-103020027
Grove - Rotary Angle Sensor, this potentiometer twig produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use. This may also be known as a rotary angle sensor.
Article no.: SE-101020017
Article no.: SE-108020021
Article no.: SE-113020007
This module is a bi-directional SPSD(single-pole, single-throw), normally open solid state relay(SSR). The Grove Optocoupler Relay (M281) offers very low on-resistance, which allowing a high load current rating.
Unlike the other TRIAC SSR in our website, this relay is based on MOSFET, so it can carry both AC load and DC load. If you need to use a SSR with the DC load, this is what you want!
Unlike the other TRIAC SSR in our website, this relay is based on MOSFET, so it can carry both AC load and DC load. If you need to use a SSR with the DC load, this is what you want!
Article no.: SE-101020603
Article no.: SE-110990030
Article no.: SE-103100124
Viewed