No results were found for the filter!
Article no.: SE-101020010
Article no.: SE-101020011
Article no.: SE-101020341
Article no.: SE-101020635
Grove - Sunlight Sensor is a multi-channel digital light sensor, which has the ability to detect UV-light, visible light and infrared light. It offers excellent performance under a wide dynamic range and a variety of light sources including direct sunlight. Suitable for your Raspberry Pi weather station or smart irrigation system using Arduino if you need to monitor the visible spectrum.
Article no.: SE-101020089
The Grove - Light Sensor v1.2 is an analog module and can output various electrical signals which can be converted to different ranges. It integrates LS06-S photoresistor, a high-sensitive and reliable photodiode, to detect the intensity of light in the environment. It is a perfect Arduino light sensor module for light measurement, light detection, and light-controlled switch.
Article no.: SE-101020132
Article no.: SE-101020063
Article no.: SE-101020033
Article no.: SE-101020193
Article no.: SE-101020174
Article no.: SE-101020023
Grove - Air quality sensor v1.3 is designed for indoor air quality testing. It can respond to carbon monoxide, alcohol, acetone, thinner, formaldehyde, and other slightly toxic gases. Compatible with 5V and 3.3V power supply, it can work with Arduino and Raspberry Pi. With its long-term stability & low power consumption, it would be a perfect choice for air quality monitoring.
Article no.: SE-101020078
Article no.: SE-101020232
Article no.: SE-101020052
The Grove-VOC and eCO2 Gas Sensor SGP30 is an air quality sensor(Arduino compatible). Based on SGP30, this module provides TVOC(Total Volatile Organic Compounds) and CO2eq output with outstanding long-term stability and low power consumption, which make it a perfect choice for indoor air quality detection.
Article no.: SE-101020512
Article no.: SE-101020532
Der Grove - SCD30 ist ein 3-in-1 Sensor, der CO2, Temperatur und Feuchtigkeit messen kann. Er basiert auf dem Sensirion SCD30 und ist ein nicht-dispersiver Infrarot(NDIR)-Kohlendioxid-Sensor mit hoher Präzision und großer Messgenauigkeit. Der Sensor ist die perfekte Wahl, für den Bau einer Wetterstation oder anderer Umweltprojekte.
Article no.: SE-101020634
AHT20 is a new generation of temperature and humidity sensor embedded with a dual-row flat and no-lead SMD package, suitable for the reflow soldering. AHT20 is equipped with a newly designed ASIC chip: an improved MEMS semiconductor capacitive humidity sensor, and a standard on-chip temperature sensor. The output is the I2C protocol with the Grove interface.
Article no.: SE-101990644
Der Grove CO2-, Temperatur- & Luftfeuchtigkeitssensor SCD41 ist ein kleines, aber leistungsstarkes Modul von Sensirion. Es ist ein Multifunktionssensor, der gleichzeitig Temperatur, Feuchtigkeit und CO2 messen kann. Er basiert auf dem SCD41 Modul und Sie können diesen Sensor in Ihrem GPS, IoT-Geräten oder anderen Geräten verwenden, die diese vier Parameter benötigen.
Article no.: SE-101020952
Article no.: SE-101020555
Article no.: SE-101020020
Article no.: SE-101020615
Article no.: SE-101020192
Article no.: SE-101020056
Article no.: SE-114020121
Article no.: SE-101020031
Article no.: SE-101020592
Article no.: SE-101020753
Article no.: SE-101020712
Article no.: SE-101020018
The new Grove - Temperature & Humidity Sensor is based on the DHT20 sensor. The DHT20 is an upgraded version of the DHT11, compared with the previous version, the temperature and humidity measurement accuracy are higher, and the measurement range is larger. It features I2C output which means easier to use.
Article no.: SE-101020932
This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. It has three detection modes to take your readings (infrared mode, full-spectrum, and human visible mode) and can be used to measure the change in light intensity in various light situations with many popular microcontrollers.
Article no.: SE-101020030
Article no.: SE-101020049
Grove - Multichannel Gas Sensor V2 provides stable and reliable gases detecting function under the circumstances of any other four sorts of gases. It can detect a variety of gases, besides Carbon monoxide (CO), Nitrogen dioxide (NO2), Ethyl alcohol(C2H5CH), Volatile Organic Compounds (VOC), and etc.
Article no.: SE-101020820
Article no.: SE-101020492
Der Grove Formaldehyd-Sensor kann Formaldehyd im Bereich von 0~1000 ppb mit geringer Querempfindlichkeit gegenüber Alkohol und hoher Stabilität von 6 Jahren Lebensdauer nachweisen. Der eingebaute RHT-Sensor sorgt dafür, dass er auch bei unterschiedlichen Temperaturen und Luftfeuchtigkeiten einwandfrei funktioniert. Die Daten werden über UART- und I2C-Ports übertragen.
Article no.: SE-101020972
Viewed