SparkFun Qwiic - Dual Solid State Relay
Product number: COM-16810
€113.00
Available · 2 piece · 1-3 days
€113.00
Description
Product information "SparkFun Qwiic - Dual Solid State Relay"
An ATTiny84 acts as the "brain" of the SparkFun Qwiic Dual Solid Relay and accepts I2C commands to switch the two relays, as well as some other special commands. The ATtiny84A's I2C address is software configurable, so if you have a really big power project in mind, you can connect over 100 Qwiic Dual Solid State Relays in series.
Handling such high voltages is dangerous! We have taken many safety precautions on the board, such as ground isolation between the relay and other circuits and a milled out area isolating each side of the AC. Despite all safety precautions, the SparkFun Qwiic Dual Solid State Relay is only suitable for users who are experienced and familiar with working with high AC voltages. If you are not comfortable working with AC voltage in this way, you should look at the IoT Power Relay instead.
Note: The relays are designed for max. 25A with forced air cooling. If you do not have forced air cooling, max. 10A through the relays is recommended.
Features:
- Operating voltage: 2.5-3.6V (3.3V recommended)
- I2C address: 0x0A (standard) 0x0B (alternatively selectable via jumper)
- Charging voltage range: 12-280VAC
- Max. Current (via relay): 25A(240VAC with forced air cooling)
- Zero cross trigger
- Normally open circuit only
- 2x Qwiic connection
Properties
| Zolltarifnummer: | 85364100 |
|---|---|
| Brand: | SparkFun |
| Country of Origin: | USA |
| EAN: | 845156010257 |
| Gross Weight (kg): | 0.093 |
| Manufacturer ID: | COM-16810 |
| Product ID: | COM-16810 |
Manufacturer and safety information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
[email protected]
WEEE number: 17968585
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]
Safety instructions
- Only make electrical connections when the device is de-energised.
- Check for static discharge before touching to avoid damage to sensitive components.
- Ensure that the maximum switching load of the relay is not exceeded.
- Only operate in a dry environment and protect from moisture.
- Do not modify or attempt to repair the device.
- When operating in enclosures, ensure adequate ventilation to prevent overheating.
- Remove defective or damaged modules from operation immediately and dispose of them.
- Dispose of in accordance with local regulations for electronic components.
- Do not dispose of with household waste; electronic waste should be disposed of at appropriate collection centres.
- Remove batteries (if present) before disposal and dispose of separately.
Reviews 0
Login
Customers also viewed
Available · 4 piece · 1-3 days