SparkFun Qwiic - Humidity sensor breakout, SHTC3
Product number: SEN-16467
€13.05
Available · 3 piece · 1-3 days
€13.05
Customers also bought
Available · 100+ piece · 1-3 days
Available · 13 piece · 1-3 days
Description
Product information "SparkFun Qwiic - Humidity sensor breakout, SHTC3"
Sensirion's SHTC3 digital humidity sensor builds on the success of the SHTC1 sensor, offering a wider supply voltage range (1.62V to 3.6V) and higher accuracy (±2% RH, ±0.2°C) than its predecessor, allowing for greater flexibility. You only need two wires for I2C communication and as a bonus you get relative humidity and very accurate temperature measurements!
Connecting is a breeze as the breakout board uses the Qwiic Connect system. The breakout board has built-in 2.2k? Pull-up resistors for I2C communication. If you connect several I2C devices to the same bus, you should deactivate these resistors.
Note: The I2C address of the SHTC3 is 0x70 and is hardware-defined. To address several SHTC3 sensors on one bus, a multiplexer/mux is required. Unfortunately, this is the same I2C address that our Qwiic Mux uses and this part is not compatible with the Qwiic Mux.
Features:
- Uses I2C interface (Qwiic capable)
- I2C address: 0x70
- 2x Qwiic connections
- Operating voltage range
- 1.62V - 3.6 V
- Typically 3.3V when using the Qwiic cable
- Relative humidity
- Operating range: 0% to 100%
- Typical accuracy: ±2 %RH
- Resolution: 0.01 %RH
- Temperature
- Operating range: -40°C to +125 °C
- Typical accuracy: ±0.2 °C
- Resolution: 0.01 °C
- Typical current consumption (varies depending on mode)
- 4.9µA to 430µA (normal mode)
- 0.5µA to 270µA (energy saving mode)
Properties
| Zolltarifnummer: | 84715000 |
|---|---|
| Brand: | SparkFun |
| Country of Origin: | USA |
| EAN: | 845156010523 |
| Gross Weight (kg): | 0.003 |
| Manufacturer ID: | SEN-16467 |
| Product ID: | SEN-16467 |
Video 1
Manufacturer and safety information
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
[email protected]
WEEE number: 17968585
Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]
Safety instructions
- Read the operating instructions carefully before commissioning and operate the product in accordance with the specifications.
- Protect the product from moisture, dust and extreme heat.
- Avoid direct contact with conductive liquids to prevent short circuits.
- Do not use in potentially explosive atmospheres unless expressly authorised.
- Do not touch or mechanically damage the sensor element.
- Do not use the device if there are any noticeable changes in operation or damage.
- Dispose of in accordance with local environmental regulations for electronic components.
- Do not dispose of electronic waste with household waste, but take it to a recycling centre.
Reviews 0
Login
Customers also viewed
Available · 9 piece · 1-3 days
Customers also bought
Available · 13 piece · 1-3 days
Available · 100+ piece · 1-3 days