Product information "USB - TTL / UART / RS232 adapter cable with PL2303HX chipset"
Technical data
- Chipset: Prolific PL2303HX (Rev. HXD)
- Assignment:
- black - ground/Gnd
- green - TXD
- white - RXD
- red - VCC 5V (3.3V also possible by opening and re-soldering the red cable)
- Cable length: approx. 0.90 m with Dupont connectors (RM 2.54mm)
- Colour: black
- Compatible with the following operating systems:
- Windows 2000 / XP / Server 2003 / Vista / Windows 7 / Server 2008/R2 32 & 64 bit - Not Windows 8 / 8.1 compatible!
- Mac OS X 10.9 Mavericks (64-bit), Mac OS X 10.8 Mountain Lion (64-bit), Mac OS X 10.7 Lion (32-bit & 64-bit), Mac OS X 10.6 Snow Leopard (32-bit & 64-bit)
- Linux - depending on the distribution used!
- tested with the Raspberry Pi under Raspbian - Is integrated here without driver installation.
Zolltarifnummer: | 84718000 |
---|---|
Brand: | BerryBase |
Compatibility: | Raspberry Pi 5, Raspberry Pi 4B, Raspberry Pi 3B+, Raspberry Pi 3B, Raspberry Pi 3A+ |
Country of Origin: | China |
EAN: | 4251266702665 |
Gross Weight (kg): | 0.026 |
Manufacturer ID: | K1USB-TTL |
Product ID: | K1USB-TTL |
VPE: | 1 / 50 |
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]
WEEE number: 83795550
Person responsible for the EU
See manufacturer information
Safety instructions
- Read the instructions for use carefully before commissioning.
- Only use the device with the specified operating voltage.
- Protect sensors/electronics from moisture, dust and direct sunlight.
- Do not carry out any unauthorised repairs or modifications.
- Do not operate the device in potentially explosive atmospheres.
- In the event of faults or damage, disconnect from the power supply immediately.
- Dispose of in accordance with local regulations for electronic waste.
- Properly dispose of rechargeable batteries or batteries, if present.
- Ensure careful handling to prevent damage to interfaces such as USB, serial or LAN.
- Keep the device away from children.
Login
5 reviews
15 April 2023 13:42
Hat bei mir nicht funktioniert
Ich hatte den Adapter gekauft um eine Verbindung zu meiner Wärmepumpe herzustellen. Es hat damit aber nicht funktioniert. Ein anderer UART-USB Adapter hat dann auf Anhieb funktioniert. Ich empfehle, einen Adapter mit LEDs zu kaufen, damit man wenigstens sieht, ob eine Kommunikation stattfindet.
23 March 2023 15:24
Verwendet Fake-IC, der von aktuellen Windows-Treibern erkannt wird (Linux OK).
Unter Linux OK. Bei aktuellen Windows gibt es die Fehlermeldung: "PL2303HXA phased out since 2012. Please contact your supplier." Laut https://www.mikrocontroller.net/topic/543211 ist das die Meldung, dass Windows den Fake-IC erkannt hat. Mit alten Treibern geht's, aber die werden von Windows immer automatisch aktualisiert. In den Produktinfos steht wahrheitsgemäß "Nicht Windows 8 / 8.1 kompatibel!", aber wer liest das schon so genau? Und tatsächlich gilt wohl "Nicht Windows 8 und folgende kompatibel!"
26 September 2022 00:00
-
-
17 July 2022 00:00
-
-
16 July 2020 00:00
funktioniert wie vorgesehen...
funktioniert wie vorgesehen