Waveshare ESP32-S3 Pico Dev Board: 2.4 GHz, dual-core processor, 240 MHz, 16MB Flash, with header

Name: Waveshare ESP32-S3 Pico Dev Board: 2.4 GHz, dual-core processor, 240 MHz, 16MB Flash, with header
Brand: Waveshare
SKU: WS-24023
Price: 11.8 EUR
Availability: LimitedAvailability

Product number: WS-24023

€11.80

Content: 1 Stück

Prices incl. VAT plus shipping costs

Available · 1 piece · 1-3 days

Pick your accessory

SIM7080G NB-IoT, Cat-M(eMTC), GNSS module for Raspberry Pi Pico

€26.90*

4-digit 8-segment display module for Raspberry Pi Pico, SPI-compatible

€3.80*

€11.80*

Waveshare ESP32-S3 Pico Dev Board: 2.4 GHz, dual-core processor, 240 MHz, 16MB Flash, with header

Content: 1 Stück

Order now and secure 6 Berrys

Our recommendations for you

Product information "Waveshare ESP32-S3 Pico Dev Board: 2.4 GHz, dual-core processor, 240 MHz, 16MB Flash, with header"

ESP32-S3 microcontroller, 2.4 GHz Wi-Fi development board, dual-core processor with a frequency of up to 240 MHz
The ESP32-S3-Pico is a compact microcontroller development board with a wide range of digital interfaces. It is based on the ESP32-S3R2 as the main chip, equipped with a dual-core Xtensa 32-bit LX7 processor with an operating frequency of 240MHz and integrated 512 KB SRAM (TCM) and 2MB PSRAM. On board are CH343 and CH334 chips for USB and UART development via a USB-C connector and a MP28164 high performance DC-DC converter chip with a load current capacity of up to 2A, which ensures the safety of the product.

Features at a glance

Utilises the ESP32-S3R2 chip with Xtensa 32-bit LX7 dual-core processor, capable of running at 240MHz
Integrated 512KB SRAM, 384KB ROM, 2MB PSRAM, 16MB Flash memory
Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication with superior RF performance
Type-C connector, more user-friendly
On-board CH343 and CH334 chips fulfil the requirements of USB and UART development via a Type-C interface
On-board DC-DC chip MP28164, high efficiency DC-DC converter chip with load current up to 2A
Rich peripheral interfaces, including USB OTG, SPI, I2C, UART, ADC, PWM and DVP (8-bit to 16-bit camera interface), LCD interfaces (8-bit to 16-bit parallel RGB, I8080, MOTO6800), etc. for flexible realisation of various functions
Soldered module enables direct soldering to carrier boards
Supports multiple energy-efficient operating states, adjustable balance between communication distance, data rate and power consumption to meet the energy requirements of different application scenarios
Supports Raspberry Pi Pico expansion card ecology, suitable for the development of Artificial Intelligence and Internet of Things applications

Technical specifications

Main chip: ESP32-S3R2
Processor: Dual-core Xtensa 32-bit LX7, up to 240 MHz
Memory: 512 KB SRAM, 2MB PSRAM, 16MB Flash
Wireless communication: 2.4 GHz Wi-Fi, Bluetooth LE
Interfaces: USB-C, UART, SPI, I2C, ADC, PWM, DVP, LCD
GPIO pins: 27 × multifunctional
Supported development environments: ESP-IDF, Arduino, MicroPython
Power supply: Onboard DC-DC chip MP28164, load current up to 2A

Scope of delivery

1x ESP32-S3-Pico with header

Zolltarifnummer:	84733020
Brand:	Waveshare
Country of Origin:	China
EAN:	4060137083815
Gross Weight (kg):	0.014
Manufacturer ID:	ESP32-S3-Pico-M
Product ID:	WS-24023

Waveshare

Waveshare: High quality modules for your Raspberry Pi

Waveshare is a reliable specialist when it comes to displays, cameras and other modules for your Raspberry Pi. With the products of the innovative electronics expert, you can turn your computer into a true all-round device.

Waveshare provides an optimal view

You are looking for the ideal display module for your Raspberry Pi? At Berrybase you will find a wide range of products from Waveshare. Each display and all associated modules have been designed with the utmost precision and meet the highest demands - no matter what purpose the respective product is supposed to serve.

For example, the Waveshare ePaper HATs offer perfect conditions if you want a high display quality even in strong sunlight. A big advantage of ePaper displays is their extremely low energy consumption. The best example is the 2.13" 250×122 ePaper Display HAT with integrated controller, which is optimally tailored to the Raspberry Pi 2B, 3B, Zero and Zero W. The communication with this module is done via SPI interface. The ePaper display equipped with the HAT is limited to the colors black and white and reflects light like conventional paper. This is good for the display quality.

If you prefer a display in the three colors red, black and white to complement your Raspberry Pi, the 2.7" 264×176 ePaper Display HAT is recommended. It has the same technical features as the other Waveshare ePaper HATS.

Compact and of brilliant quality: The Waveshare 7 inch Display

The Waveshare 7 inch display, on the other hand, scores not only with its compact design, but also with a 1024x600 hardware resolution and capacitive touch control. On all devices with Raspberry Pi OS, the 7 inch LCD even works driver-free. The integrated 3.5mm jack enables sound output, while the image is produced via an HDMI connection. The impeccable quality manifests itself in a high-quality glass surface with a 6H hardness level.

At Berrybase, you can get the display including a robust case on request - so that it is optimally protected against external influences. Besides the Waveshare 7 inch display, the electronics specialist also has many other screens in different sizes available.

Waveshare Game HAT: Turning your Raspberry Pi into a game console

One of the top sellers at Berrybase is the Waveshare Game HAT for the Raspberry Pi. The controller transforms your computer into a mobile game console. The 3.5" IPS display convinces with a 480×320 resolution and ensures smooth image playback and thus unlimited gaming fun. The sound is reproduced via on-board speakers or optionally via the 3.5 mm jack socket. The battery of the Game HAT is charged via the integrated charging circuit. The module is compatible with the Raspberry Pi models A+, B+, 2B, 3B and 3B+. For other versions the connection via HDMI cable is possible.

If you want to turn your Raspberry Pi into a mobile retro console, we recommend the GamePi43 with a 4.3-inch IPS display, which is suitable for the Raspberry Pi models B+, 2B, 3B and 3B+, or the especially compact GamePi20. The latter features a 2.0-inch IPS display and is compatible with the Raspberry Pi Zero 1.3, Zero W as well as the Zero WH.

Practical accessories for every purpose

By the way: Waveshare's product range is also peppered with useful accessories for your Raspberry Pi. The Li-Ion battery HAT for example provides a mobile power supply for your computer. The 8 channel DIN rail relay module from Waveshare allows you to use your Raspberry Pi as a control module for tech projects in the home, for example to centrally control the home lighting or shutters. And with the Ethernet / USB HUB HAT, Waveshare has designed a module that extends the USB capability of your Raspberry Pi and provides an RJ45 Ethernet port. The latter offers an enormous added value when a stable wired Ethernet connection is required.

Manufacturer information
Waveshare International Limited
2F, World Trade Plaza south side, Fuhong Rd
CN 518033 Futian District, Shenzhen
https://www.waveshare.com
[email protected]

WEEE number: 72769965

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions

Avoid contact with water or other liquids to prevent short circuits and damage.
Do not connect the power supply until all connections have been made correctly.
Ensure the correct voltage and only use suitable power supply units.
Do not touch the circuit board during operation to avoid thermal burns and electrostatic discharges.
Work on an ESD mat or wear a grounding wrist strap to prevent damage from electrostatic discharge.
Only use the microcontroller in designated housings or environments to prevent mechanical damage.
Keep the board away from flammable materials and ventilate well during intensive use.
Dispose of the device in accordance with local regulations for electronic waste.
When disposing of the device, remove any connected batteries properly and separately.
Avoid making your own modifications or improper use, as this can be dangerous and may invalidate the warranty.