Skip to main content Skip to search Skip to main navigation
Menu

Our recommendations for you

Loading...
Description

Product information "Waveshare L-shaped permanent magnet DC geared motor, magnetic Hall encoder, 240 rpm, 12V"

Waveshare L-shaped permanent magnet DC geared motor, magnetic Hall encoder, full metal geared motor
L-shaped permanent magnet DC geared motor
Full metal gearbox, magnetic Hall encoder
Mainly used in short-axis robots and L-shaped applications
No self-locking function in the reducer, the output shaft can be rotated by hand.

Features at a glance
  • L-shaped permanent magnet DC geared motor
  • Full metal gearbox
  • Magnetic Hall encoder
  • Mainly used in short-axis robots and L-shaped applications
  • No self-locking function in the reducer
  • The output shaft can be rotated by hand
Encoder Pin Definition



Technical data

  • Working current: DC 12 V
  • Rated power: 5.2 W
  • Idle speed: 240 rpm
  • Standstill torque: ≥8.5 kg.cm
  • No-load current: 0.15 A MAX
  • Standstill current: ≤3.5 A
  • Nominal load: 4.0 kg.cm
  • Hall resolution: Base 13 PPR × 42=546 PPR
  • Rated speed: 125 rpm
  • Gear reduction ratio: 1:42
  • Rated current: 1.0 A MAX
Encoder specifications
  • Type: AB Dual-Phase Incremental Magnetic Hall Encoder
  • Line rate: Base pulse 13 PPR × gear reduction ratio
  • Power supply: DC 3.3V / DC 5.0V
  • Basic function: With pull-up resistor, can be connected directly to MCU
  • Interface type: XH2.54-6PIN
  • Output signal type: Square wave AB phase
  • Response frequency: 100 KHz
  • Base pulses: 13 PPR
  • Magnetic ring trigger poles: 26 poles (13 pairs of poles)
Other data
  • Ideal for precise control in robotics applications
Scope of delivery
  • 1x L-shaped permanent magnet DC geared motor
Links
Properties
Zolltarifnummer: 85059090
Brand: Waveshare
Country of Origin: China
Gross Weight (kg): 0.173
Manufacturer ID: DCGM-3865-12V-EN-240RPM
Product ID: WS-22346
Manufacturer

Waveshare

Waveshare: High quality modules for your Raspberry Pi

Waveshare is a reliable specialist when it comes to displays, cameras and other modules for your Raspberry Pi. With the products of the innovative electronics expert, you can turn your computer into a true all-round device.

Waveshare provides an optimal view

You are looking for the ideal display module for your Raspberry Pi? At Berrybase you will find a wide range of products from Waveshare. Each display and all associated modules have been designed with the utmost precision and meet the highest demands - no matter what purpose the respective product is supposed to serve.

For example, the Waveshare ePaper HATs offer perfect conditions if you want a high display quality even in strong sunlight. A big advantage of ePaper displays is their extremely low energy consumption. The best example is the 2.13" 250×122 ePaper Display HAT with integrated controller, which is optimally tailored to the Raspberry Pi 2B, 3B, Zero and Zero W. The communication with this module is done via SPI interface. The ePaper display equipped with the HAT is limited to the colors black and white and reflects light like conventional paper. This is good for the display quality.

If you prefer a display in the three colors red, black and white to complement your Raspberry Pi, the 2.7" 264×176 ePaper Display HAT is recommended. It has the same technical features as the other Waveshare ePaper HATS.

Compact and of brilliant quality: The Waveshare 7 inch Display

The Waveshare 7 inch display, on the other hand, scores not only with its compact design, but also with a 1024x600 hardware resolution and capacitive touch control. On all devices with Raspberry Pi OS, the 7 inch LCD even works driver-free. The integrated 3.5mm jack enables sound output, while the image is produced via an HDMI connection. The impeccable quality manifests itself in a high-quality glass surface with a 6H hardness level.

At Berrybase, you can get the display including a robust case on request - so that it is optimally protected against external influences. Besides the Waveshare 7 inch display, the electronics specialist also has many other screens in different sizes available.

Waveshare Game HAT: Turning your Raspberry Pi into a game console

One of the top sellers at Berrybase is the Waveshare Game HAT for the Raspberry Pi. The controller transforms your computer into a mobile game console. The 3.5" IPS display convinces with a 480×320 resolution and ensures smooth image playback and thus unlimited gaming fun. The sound is reproduced via on-board speakers or optionally via the 3.5 mm jack socket. The battery of the Game HAT is charged via the integrated charging circuit. The module is compatible with the Raspberry Pi models A+, B+, 2B, 3B and 3B+. For other versions the connection via HDMI cable is possible.

If you want to turn your Raspberry Pi into a mobile retro console, we recommend the GamePi43 with a 4.3-inch IPS display, which is suitable for the Raspberry Pi models B+, 2B, 3B and 3B+, or the especially compact GamePi20. The latter features a 2.0-inch IPS display and is compatible with the Raspberry Pi Zero 1.3, Zero W as well as the Zero WH.

Practical accessories for every purpose

By the way: Waveshare's product range is also peppered with useful accessories for your Raspberry Pi. The Li-Ion battery HAT for example provides a mobile power supply for your computer. The 8 channel DIN rail relay module from Waveshare allows you to use your Raspberry Pi as a control module for tech projects in the home, for example to centrally control the home lighting or shutters. And with the Ethernet / USB HUB HAT, Waveshare has designed a module that extends the USB capability of your Raspberry Pi and provides an RJ45 Ethernet port. The latter offers an enormous added value when a stable wired Ethernet connection is required.

Manufacturer and safety information
Manufacturer information
Waveshare International Limited
2F, World Trade Plaza south side, Fuhong Rd
CN 518033 Futian District, Shenzhen
https://www.waveshare.com
[email protected]

WEEE number: 72769965

Person responsible for the EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Safety instructions
  • Only use in dry indoor areas to avoid damage caused by moisture.
  • Keep away from direct sunlight or extreme temperatures.
  • Ensure that the operating voltage corresponds to the technical specifications.
  • Only connect using a suitable cable and plug.
  • Protect the product from mechanical damage, vibrations and shocks.
  • Always switch off the power supply during installation and maintenance.
  • Protect electronic components from electrostatic discharge (ESD).
  • Use only by trained personnel.
  • Do not repair defective products without authorisation, but dispose of them properly.
  • Dispose of batteries or rechargeable batteries in accordance with local regulations.
  • Do not dispose of with household waste, but pass it on to certified collection centres.
Reviews
0

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

RPI-PICO2-WH
Raspberry Pi Pico 2W, RP2350 + WLAN + Bluetooth Mikrocontroller-Board, mit Headern

€8.50

Available · 100+ piece · 1-3 days

PCW04A
PCWork, PCW04A 2in1 side cutter, wire stripper

€5.50

Available · 22 piece · 1-3 days

Average rating of 5 out of 5 stars

76743
DC coupling for barrel connector 5.5x2.1mm - screw mounting terminal block 2-pin

€0.40

Available · 100+ piece · 1-3 days

RPI-PICO2-H
Raspberry Pi Pico 2, RP2350 Mikrocontroller-Board, mit Headern

€6.50

Available · 100+ piece · 1-3 days

Average rating of 5 out of 5 stars

TFM-M2.5
Metal spacer sleeve with thread (inside/outside) M2.5

From €0.24

Available · 100+ piece · 1-3 days

Average rating of 4.1 out of 5 stars

RPI-POEHAT2
Power over Ethernet (PoE+) HAT for Raspberry Pi 4 & 3B+, R2

€21.90

Available · 100+ piece · 1-3 days

Average rating of 4.7 out of 5 stars

RPI-CGPIOH
40 pin GPIO header for Raspberry Pi, colour coded, extended version

€1.20

Available · 100+ piece · 1-3 days

Average rating of 4.2 out of 5 stars

95682
USB 2.0 SDXC / SDHC / SD card reader

€3.90

Available · 9 piece · 1-3 days

T1325557
Precision test probe with 4mm safety coupling, black

€1.65

Available · 11 piece · 1-3 days

M5-U001-C
M5Stack ENV III unit with temperature-humidity-air pressure sensor (SHT30+QMP6988)

€8.40

Available · 74 piece · 1-3 days

Average rating of 5 out of 5 stars

PRT-17260
SparkFun Qwiic - Flexible cable, 50mm

€1.60

Available · 100+ piece · 1-3 days

Average rating of 5 out of 5 stars

GPIO-40F-26M-15
GPIO adapter cable for Raspberry Pi, 40 pin female > 26 pin male, grey, 15cm

€2.90

Available · 18 piece · 1-3 days

Average rating of 4.8 out of 5 stars

RPI-CGST-62
40 pin GPIO stacking header for Raspberry Pi, colour coded, 6.2mm

€1.90

Available · 100+ piece · 1-3 days

Average rating of 5 out of 5 stars

T1325526
Test lead, 1mm², PVC, 2x 4mm banana plugs, 50cm, red

€1.70

Available · 48 piece · 1-3 days

E-RM16
Hook set 140 mm, 6-piece

€4.40

Available · 5 piece · 1-3 days

Average rating of 5 out of 5 stars

PBS-DS-KIT
Perforated grid board, double-sided, various sizes, set of 32 pieces

Content: 32 Stück (€0.28 / 1 Stück)

€8.80

Available · 100+ piece · 1-3 days

Average rating of 4.7 out of 5 stars

NMCU-ESP32
ESP32 NodeMCU Development Board

€6.80

Available · 100+ piece · 1-3 days

Average rating of 4.5 out of 5 stars

51200
Desoldering pump with high suction power & Teflon tip

€2.10

Available · 46 piece · 1-3 days

Average rating of 5 out of 5 stars

TFF-M2.5
Metal spacer sleeve with thread (inside) M2.5

From €0.24

Available · 100+ piece · 1-3 days

ADA5769
Adafruit audio add-on for QT Py and Xiao

€6.55

Available · 8 piece · 1-3 days

Average rating of 4.8 out of 5 stars

RPI4B-4GB
Raspberry Pi 4 Computer Model B, 4GB RAM

€61.30

Available · 100+ piece · 1-3 days

PIM438
MAX30101 Pulse, Blood Oxygen Meter, Smoke Sensor Breakout

€24.50

Available · 6 piece · 1-3 days

Average rating of 2.8 out of 5 stars

RPI-CAMERA-MOUNT
Camera mount for Raspberry Pi Camera Module

€4.80

Available · 3 piece · 1-3 days

Average rating of 4.7 out of 5 stars

MicroUSBoffen
Micro USB cable with open cable end for power supply

From €1.20

Available · 100+ piece · 1-3 days

Similar products

POL1455
Pololu high-performance motor driver 18v25 CS

€91.90

Available · 3 piece · 1-3 days

PIM698
Pimoroni Yukon prototyping module

€3.50

Available · 6 piece · 1-3 days

ACT-23HS2430
ACT motor Nema23 stepper motor, 23HS2430, 1.8° step angle, 3.0 Nm holding torque, 3A

€28.90

Available · 6 piece · 1-3 days

ADA6109
Adafruit A4988 Stepper motor driver, stepper motor driver, microstep mode 1/16, 2A, 8-35V

€7.65

Available · 16 piece · 1-3 days

SE-105020093
seeed Grove - I2C Motor Driver (L298P)

€17.70

Available · 2 piece · 1-3 days

ROB-13911
SparkFun Serially controlled motor driver

€14.90

Available · 2 piece · 1-3 days

PIM697
Pimoroni Yukon Serial Servo Module

€7.70

Available · 14 piece · 1-3 days

ACT-23HS9440
ACT motor Nema23 stepper motor, 23HS9440-26, 1.8° step angle, 2.4 Nm holding torque, 4A

€18.90

Available · 6 piece · 1-3 days

POL3762
Pololu DRV8434 stepper motor driver, 1/256 steps, bipolar, 1.2-2A, 4.5-48V, without header

€8.90

Available · 27 piece · 1-3 days

TMC2130
TMC2130 stepper motor driver module

€9.30

Available · 23 piece · 1-3 days

ROB-12629
Wheel Encoder Kit

€14.30

Available · 4 piece · 1-3 days

PIM695
Pimoroni Yukon Quad servo module for 3 pin servos, direct

€5.50

Available · 12 piece · 1-3 days

ACT-23HS8440
ACT motor Nema23 stepper motor, 23HS8440-23, 1.8° step angle, 1.9 Nm holding torque, 4A

€17.50

Available · 4 piece · 1-3 days

POL3763
Pololu DRV8434 Stepper motor driver, 1/256 steps, bipolar, 1.2-2A, 4.5-48V, with header

€9.90

Available · 15 piece · 1-3 days

MKB-P3020002
Makeblock mBuild motor driver, DC motor control, direction of rotation control, 1 A

€7.90

Available · 4 piece · 1-3 days

PIM479
DRV8830 DC motor driver breakout

€12.50

Available · 4 piece · 1-3 days

ACT-23HS8430
ACT motor Nema23 stepper motor, 23HS8430, 1.8° step angle, 1.9 Nm holding torque, 3A

€17.50

Available · 1 piece · 1-3 days

POL5081
Pololu Motoron M2U550, Dual Serial Motor Controller, bidirectional, I2C, UART, 22V/1.6A, without header

€15.90

Available · 9 piece · 1-3 days

BOB-13752
SparkFun AutoDriver - Stepper motor driver (v13)

€49.90

Available · 3 piece · 1-3 days

PIM692
Pimoroni Yukon dual switchable current output module, 5-17V

€13.50

Available · 8 piece · 1-3 days

ACT-17HM5417
ACT motor Nema17 stepper motor, 17HM5417, 0.9° step angle, 0.4 Nm holding torque, 1.7A

€12.50

Available · 8 piece · 1-3 days

POL5080
Pololu Motoron M2U550, Dual Serial Motor Controller, bidirectional, I2C, UART, 22V/1.6A, with header

€16.90

Available · 4 piece · 1-3 days

ADA1455
Adafruit 12-channel 16-bit PWM LED driver, SPI interface

€8.25

Available · 15 piece · 1-3 days

PIM690
Pimoroni Yukon Bench Power Module, 5A Step-down DAC, 3-12V output

€14.50

Available · 5 piece · 1-3 days

ACT-17HS5425
ACT motor Nema17 stepper motor, 17HS5425, 1.8° step angle, 0.58 Nm holding torque, 2.5A

€9.90

Available · 16 piece · 1-3 days