2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)

  • 3C-RPI-EINK21
  • ¡Este artículo no está disponible actualmente!
    Envíeme una notificación cuando el artículo esté disponible para su entrega.
    14,90 € *

    inkl. MwSt. más envío y manipulación

    The article cannot be placed in the shopping cart, as max. 1 Raspberry Pi per customer is allowed.
    Übersicht This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104...más
    "2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Übersicht

    This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

    Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
    • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Spezifikationen
    • Operating voltage: 3.3V
    • Interface: SPI, 4-wire SPI
    • Outline dimension: 65mm × 30.2mm
    • Display size: 23.71mm × 48.55mm
    • Dot pitch: 0.229 × 0.228
    • Resolution: 212 × 104
    • Display color: black, red, white
    • Grey level: 2
    • Full refresh time: 15s
    • Refresh power: 26.4mV(typ.)
    • Standby power: <0.17mV
    • Viewing angle: >170°

    Interface


    SYMBOL DESCRIPTION
    VCC 3.3V
    GND Ground
    NC NC
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active


    Lieferumfang
    • 2.13inch e-Paper HAT (B)
    • RPi screws pack (2pcs)
    • 9-pin 2.54 pitch SMD pinheader

    Dokumentation / Downloads
    Enlaces de continuación a "2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Datos "2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Número de artículo: 3C-RPI-EINK21
    Peso lordo (in kg): 0.026
    Fabricante: Waveshare
    Número de fabricante: 2.13inch e-Paper HAT (B)
    Número de arancel aduanero: 84733080
    País de origen: China
    Leer, escribir y debatir reseñas...más
    Valoraciones de clientes para "2.13" 212×104 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    5 29/8/2021

    __TS_HEADLINE__

    ausreichend groß passt gut zum Pi-Zero

    3 9/10/2018

    __TS_HEADLINE__

    Hatte gedacht und erwartet, dass sich Waveshare etwas mehr um die aktualität der Treiber bemüht...
    Stichwort: WiringPi, bcm2835 & und Kernel (z.B. V4.14)

    Schade...

    5 13/8/2018

    __TS_HEADLINE__

    Steckerfertig zu Raspberry Pi. Sehr einfache Montage auf Zero W.

    4.35
    Escribir valoración
    Las valoraciones se desbloquearán tras su comprobación.
    Introduzca la secuencia de cifras en el campo de texto siguiente

    Los campos marcados con un * son obligatorios.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Contenido 10 Meter (0,13 € * / 1 Meter)
    1,31 € *
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Contenido 10 Meter (0,19 € * / 1 Meter)
    1,90 € *
    Últimos vistos

    Cambie a la tienda adecuada ahora

    Hemos establecido que no se encuentra en Alemania y que podemos ofrecerle mejores condiciones de envío en nuestra tienda para su ubicación.