5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)

  • 3C-RPI-EINK583
  • 59,90 € *

    inkl. MwSt. más envío y manipulación

    Disponible immédiatement
    4 pieza · 1 - 3 días laborables

    The article cannot be placed in the shopping cart, as max. 1 Raspberry Pi per customer is allowed.

    darse cuenta

    Atención:

    Versandkostenfrei innerhalb Deutschlands

    Versandkostenfrei ab 29€

    Bestellungen ab 29€ Warenwert sind bei uns generell Versandkostenfrei bei Lieferung innerhalb Deutschlands.

    Frecuentemente compramos juntos:
    5.83" 600×448 ePaper Display HAT für Raspberry Pi,
    5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)
    59,90 €
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17,70 €
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
       
    4,90 €
    Raspberry Pi Zero W
    Raspberry Pi Zero W
       
    16,50 €
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
       
    7,85 €
    =
    Total:
    106,85 €*
    VAT incluido. incluidos los gastos de envío
    Frecuentemente compramos juntos:
    5.83" 600×448 ePaper Display HAT für Raspberry Pi,
    5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)
    59,90 €
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17,70 €
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
       
    4,90 €
    Raspberry Pi Zero W
    Raspberry Pi Zero W
       
    16,50 €
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
       
    7,85 €
    =
    Total:
    106,85 €*
    VAT incluido. incluidos los gastos de envío
    Overview This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with...más
    "5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Overview

    This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

    Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

    Features

    No backlight, keeps displaying last content for a long time even when power down
    Ultra low power consumption, basically power is only required for refreshing
    Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
    SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Specifications

    • Operating voltage: 3.3V~5V
    • Interface: SPI
    • Outline dimension: 125.40mm × 99.50mm
    • Display size: 118.80mm × 88.26mm
    • Dot pitch: 0.198 × 0.197
    • Resolution: 600 × 448
    • Display color: red, black, white
    • Grey level: 2
    • Full refresh time: 14s
    • Refresh power: 26.4mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°
    • Weight: 0.05 kg

    Interface
    SYMBOLDESCRIPTION
    VCC 3.3V~5V
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active

    Lieferumfang:
    • 5.83inch e-Paper (B) x1
    • e-Paper Driver HAT x1
    • RPi screws pack (2pcs) x1
    • PH2.0 20cm 8Pin x1

    Dokumentation & Downloads
    Wiki : www.waveshare.com/wiki/5.83inch_e-Paper_HAT_(B)_
    Enlaces de continuación a "5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Datos "5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Número de artículo: 3C-RPI-EINK583
    Peso lordo (in kg): 0.143
    Tamaño de pantalla: 5,83 Zoll
    Fabricante: Waveshare
    Número de fabricante: 5.83inch e-Paper HAT (B)
    Número de arancel aduanero: 84733080
    País de origen: China
    Leer, escribir y debatir reseñas...más
    Valoraciones de clientes para "5.83" 600×448 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Escribir valoración
    Las valoraciones se desbloquearán tras su comprobación.
    Introduzca la secuencia de cifras en el campo de texto siguiente

    Los campos marcados con un * son obligatorios.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Contenido 10 Meter (0,13 € * / 1 Meter)
    1,31 € *
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Contenido 10 Meter (0,19 € * / 1 Meter)
    1,90 € *
    Últimos vistos

    Cambie a la tienda adecuada ahora

    Hemos establecido que no se encuentra en Alemania y que podemos ofrecerle mejores condiciones de envío en nuestra tienda para su ubicación.