7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)

  • 3C-RPI-EINK75
  • ¡Este artículo no está disponible actualmente!
    Envíeme una notificación cuando el artículo esté disponible para su entrega.
    56,90 € *

    inkl. MwSt. más envío y manipulación

    The article cannot be placed in the shopping cart, as max. 1 Raspberry Pi per customer is allowed.
    Atención:

    Versandkostenfrei innerhalb Deutschlands

    Versandkostenfrei ab 29€

    Bestellungen ab 29€ Warenwert sind bei uns generell Versandkostenfrei bei Lieferung innerhalb Deutschlands.

    Übersicht This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800x480...más
    "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Übersicht

    This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800x480 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

    Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
    • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Spezifikationen
    • Operating voltage: 3.3V
    • Interface: SPI
    • Outline dimension: 170.2mm × 111.2mm
    • Display size: 163.2mm × 97.92mm
    • Dot pitch: 0.205 × 0.204
    • Resolution: 800 × 480
    • Display color: red, black, white
    • Grey level: 2
    • Full refresh time: 16s
    • Refresh power: 48mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°

    Interface

    SYMBOL DESCRIPTION
    VCC 3.3V
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active


    Lieferumfang
    • 7.5inch e-Paper (B)
    • ePaper Driver HAT
    • RPi screws pack (2 pcs.)

    Dokumentation / Downloads
    Enlaces de continuación a "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Datos "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Número de artículo: 3C-RPI-EINK75
    Peso lordo (in kg): 0.150
    Fabricante: Waveshare
    Número de fabricante: 7.5inch e-Paper HAT (B)
    Número de arancel aduanero: 84733080
    País de origen: China
    Leer, escribir y debatir reseñas...más
    Valoraciones de clientes para "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    5 9/8/2018

    __TS_HEADLINE__

    Genau wie erwartet, alles funktioniert wie erwartet.

    5.00
    Escribir valoración
    Las valoraciones se desbloquearán tras su comprobación.
    Introduzca la secuencia de cifras en el campo de texto siguiente

    Los campos marcados con un * son obligatorios.

    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Contenido 10 Meter (0,19 € * / 1 Meter)
    1,90 € *
    Últimos vistos

    Cambie a la tienda adecuada ahora

    Hemos establecido que no se encuentra en Alemania y que podemos ofrecerle mejores condiciones de envío en nuestra tienda para su ubicación.