Ethernet Shield für Arduino Uno / Mega 2560

  • AUNO-LANSH
  • |
  • 4251266704164
  • 11,80 € *

    inkl. MwSt. más envío y manipulación

    Disponible immédiatement
    269 pieza · 1 - 3 días laborables

    The article cannot be placed in the shopping cart, as max. 1 Raspberry Pi per customer is allowed.

    darse cuenta

    Frecuentemente compramos juntos:
    Ethernet Shield für Arduino Uno / Mega 2560
    Ethernet Shield für Arduino Uno / Mega 2560
    11,80 €
    kompatibler Arduino Mega mit Atmel Mega 2560 Prozessor
    kompatibler Arduino Mega mit Atmel Mega 2560 Prozessor
       
    12,60 €
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    1,31 €
    kompatibler Arduino Uno mit Atmel Mega 328P Prozessor
    kompatibler Arduino Uno mit Atmel Mega 328P Prozessor
       
    6,85 €
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
       
    1,90 €
    =
    Total:
    34,46 €*
    VAT incluido. incluidos los gastos de envío
    Frecuentemente compramos juntos:
    Ethernet Shield für Arduino Uno / Mega 2560
    Ethernet Shield für Arduino Uno / Mega 2560
    11,80 €
    kompatibler Arduino Mega mit Atmel Mega 2560 Prozessor
    kompatibler Arduino Mega mit Atmel Mega 2560 Prozessor
       
    12,60 €
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    1,31 €
    kompatibler Arduino Uno mit Atmel Mega 328P Prozessor
    kompatibler Arduino Uno mit Atmel Mega 328P Prozessor
       
    6,85 €
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
    Kupferschaltdraht, isoliert, ø0,5mm, 10m schwarz
       
    1,90 €
    =
    Total:
    34,46 €*
    VAT incluido. incluidos los gastos de envío
    Overview The Arduino Ethernet is a microcontroller board based on the ATmega328. It has 14...más
    "Ethernet Shield für Arduino Uno / Mega 2560"

    Overview

    The Arduino Ethernet is a microcontroller board based on the ATmega328.
    It has 14 digital input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a RJ45 connection, a power jack,
    an ICSP header, and a reset button. NB: Pins 10, 11, 12 and 13 are reserved for interfacing with the Ethernet module and should not be used otherwise. This reduces the number of available pins to 9, with 4 available as PWM outputs.
    An optional Power over Ethernet module can be added to the board as well.The Ethernet differs from other boards in that it does not have an onboard USB-to-serial driver chip, but has a Wiznet Ethernet interface. This is the same interface found on the Ethernet shield. An onboard microSD card reader, which can be used to store files for serving over the network,
    is accessible through the SD Library. Pin 10 is reserved for the Wiznet interface, SS for the SD card is on Pin 4. The 6-pin serial programming header is compatible with the USB Serial adapter and also with the FTDI USB cables or with Sparkfun and Adafruit FTDI-style basic USB-to-serial breakout boards. It features support for automatic reset, allowing sketches to be uploaded without pressing the reset button on the board. When plugged into a USB to Serial adapter, the Arduino Ethernet is powered from the adapter.

     

    Summary

    Microcontroller ATmega328
    Operating Voltage 5V
    Input Voltage Plug (recommended) 7-12V
    Input Voltage Plug (limits) 6-20V
    Input Voltage PoE (limits) 36-57V
    Digital I/O Pins 14 (of which 4 provide PWM output)
    Arduino Pins reserved:
      10 to 13 used for SPI
      4 used for SD card
      2 W5100 interrupt (when bridged)
    Analog Input Pins 6
    DC Current per I/O Pin 40 mA
    DC Current for 3.3V Pin 50 mA
    Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader
    SRAM 2 KB (ATmega328)
    EEPROM 1 KB (ATmega328)
    Clock Speed 16 MHz
    W5100 TCP/IP Embedded Ethernet Controller
    Power Over Ethernet ready Magnetic Jack
    Micro SD card, with active voltage translators

     

    Dieses Shield wird komplett montiert geliefert.

     

    Enlaces de continuación a "Ethernet Shield für Arduino Uno / Mega 2560"
    Datos "Ethernet Shield für Arduino Uno / Mega 2560"
    Número de artículo: AUNO-LANSH
    Peso lordo (in kg): 0.028
    EAN/UPC: 4251266704164
    Fabricante: Frei
    Número de fabricante: AUNO-LANSH
    Número de arancel aduanero: 85176990
    País de origen: China
    Leer, escribir y debatir reseñas...más
    Valoraciones de clientes para "Ethernet Shield für Arduino Uno / Mega 2560"
    Escribir valoración
    Las valoraciones se desbloquearán tras su comprobación.
    Introduzca la secuencia de cifras en el campo de texto siguiente

    Los campos marcados con un * son obligatorios.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Contenido 10 Meter (0,13 € * / 1 Meter)
    1,31 € *
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Contenido 10 Meter (0,19 € * / 1 Meter)
    1,90 € *
    Últimos vistos

    Cambie a la tienda adecuada ahora

    Hemos establecido que no se encuentra en Alemania y que podemos ofrecerle mejores condiciones de envío en nuestra tienda para su ubicación.