Cerrar filtros

Filter

 
  •  
  •  
de a
  •  

Sensores

1 2 3
Für die Filterung wurden keine Ergebnisse gefunden!
Der Grove - Ultraschall-Abstandssensor ist ein Ultraschallwandler, der Ultraschallwellen zur Abstandsmessung nutzt. Er kann von 3 cm bis 350 cm mit einer Genauigkeit von bis zu 2 mm messen.
Artículo No.: SE-101020010
4,00 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
145 pieza
· 1 - 3 días laborables
Grove - DHT11 Temperature & Humidity Sensor is a high quality, low-cost digital temperature, and humidity sensor based on the DHT11 module.
Artículo No.: SE-101020011
6,00 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
107 pieza
· 1 - 3 días laborables
The video shows how to recognize different colors with the sensor and then to drive the lamp lighting in blue, green, yellow, orange and red accordingly
Artículo No.: SE-101020341
8,90 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
79 pieza
· 1 - 3 días laborables
Der Grove Wasserstandssensor ist ein sehr genauer Sensor, der bei Anwendungen zur Wasserstandserfassung hilfreich sein kann. Er ist vollständig wasserdicht und verwendet kapazitive Pads, um Wasserstände bis zu 10 cm zu erkennen.
Artículo No.: SE-101020635
7,80 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
47 pieza
· 1 - 3 días laborables
Grove - Sunlight Sensor is a multi-channel digital light sensor, which has the ability to detect UV-light, visible light and infrared light. It offers excellent performance under a wide dynamic range and a variety of light sources including direct sunlight. Suitable for your Raspberry Pi weather station or smart irrigation system using Arduino if you need to monitor the visible spectrum.
Artículo No.: SE-101020089
10,10 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
35 pieza
· 1 - 3 días laborables
The Grove - Light Sensor v1.2 is an analog module and can output various electrical signals which can be converted to different ranges. It integrates LS06-S photoresistor, a high-sensitive and reliable photodiode, to detect the intensity of light in the environment. It is a perfect Arduino light sensor module for light measurement, light detection, and light-controlled switch.
Artículo No.: SE-101020132
3,00 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
32 pieza
· 1 - 3 días laborables
Grove compatible interface Wide supply voltage range Built-in signal filtering
Artículo No.: SE-101020063
6,00 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
30 pieza
· 1 - 3 días laborables
Low power consumption Wide power supply range: DC 3~5V Convenient to use High sensitivity
Artículo No.: SE-101020033
13,20 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
29 pieza
· 1 - 3 días laborables
Upgraded edition of BPM180 High accuracy Easy-to-use Grove Compatible Interface Supports both I2C and SPI communication Can be used as an altimeter with accuracy of ±1 meter
Artículo No.: SE-101020193
15,30 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
28 pieza
· 1 - 3 días laborables
Grove - Infrared Reflective Sensor v1.2 can be used for the detection of proximity and color of objects. The reflective photosensor - RPR-220 used in this module consists of an infrared light emitting diode and a high ?sensitivity phototransistor.
Artículo No.: SE-101020174
5,00 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
26 pieza
· 1 - 3 días laborables
An Arduino sound sensor based on the power amplifier LM358 and the electret microphone. It can be used to detect whether there's sound (like the sound of clapping, noise, etc) surround or not and output the sound strength of the environment. This sound module provides analog output signal.
Artículo No.: SE-101020023
5,00 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
26 pieza
· 1 - 3 días laborables
Grove - Air quality sensor v1.3  is designed for indoor air quality testing. It can respond to carbon monoxide, alcohol, acetone, thinner, formaldehyde, and other slightly toxic gases. Compatible with 5V and 3.3V power supply, it can work with Arduino and Raspberry Pi. With its long-term stability & low power consumption, it would be a perfect choice for air quality monitoring.
Artículo No.: SE-101020078
5,30 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
24 pieza
· 1 - 3 días laborables
Use voice to interact with things around you can always be one of the most interesting things of IoT application, we want to make something more different and cooler
Artículo No.: SE-101020232
19,90 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
20 pieza
· 1 - 3 días laborables
Detects conductance of skin Finger Straps for electrodes Used for detecting strong emotions 3.3V and 5V dual mode Grove connector compatible
Artículo No.: SE-101020052
10,10 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
20 pieza
· 1 - 3 días laborables
The Grove-VOC and eCO2 Gas Sensor SGP30 is an air quality sensor(Arduino compatible). Based on SGP30, this module provides TVOC(Total Volatile Organic Compounds) and CO2eq output with outstanding long-term stability and low power consumption, which make it a perfect choice for indoor air quality detection.
Artículo No.: SE-101020512
16,20 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
19 pieza
· 1 - 3 días laborables
Grove - Time of Flight Distance Sensor-VL53L0X is a high speed, high accuracy and long-range ToF distance sensor based on VL53L0X.
Artículo No.: SE-101020532
7,50 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
19 pieza
· 1 - 3 días laborables
Der Grove - SCD30 ist ein 3-in-1 Sensor, der CO2, Temperatur und Feuchtigkeit messen kann. Er basiert auf dem Sensirion SCD30 und ist ein nicht-dispersiver Infrarot(NDIR)-Kohlendioxid-Sensor mit hoher Präzision und großer Messgenauigkeit. Der Sensor ist die perfekte Wahl, für den Bau einer Wetterstation oder anderer Umweltprojekte.
Artículo No.: SE-101020634
59,60 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
19 pieza
· 1 - 3 días laborables
AHT20 is a new generation of temperature and humidity sensor embedded with a dual-row flat and no-lead SMD package, suitable for the reflow soldering. AHT20 is equipped with a newly designed ASIC chip: an improved MEMS semiconductor capacitive humidity sensor, and a standard on-chip temperature sensor. The output is the I2C protocol with the Grove interface.
Artículo No.: SE-101990644
7,30 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
18 pieza
· 1 - 3 días laborables
Der Grove CO2-, Temperatur- & Luftfeuchtigkeitssensor SCD41 ist ein kleines, aber leistungsstarkes Modul von Sensirion. Es ist ein Multifunktionssensor, der gleichzeitig Temperatur, Feuchtigkeit und CO2 messen kann. Er basiert auf dem SCD41 Modul und Sie können diesen Sensor in Ihrem GPS, IoT-Geräten oder anderen Geräten verwenden, die diese vier Parameter benötigen.
Artículo No.: SE-101020952
55,60 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
18 pieza
· 1 - 3 días laborables
The Grove - 1-Wire Thermocouple Amplifier (MAX31850K) is a thermocouple-to-digital converter with 14-bit resolution and cold-junction compensation. It can measure the values of temperature from -50°C to 600°C.
Artículo No.: SE-101020555
18,80 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
17 pieza
· 1 - 3 días laborables
The Grove - PIR Motion Sensor(Passive Infrared Sensor) is an easy-to-use motion sensor with Grove compatible interface. Simply connecting it to Base Shield and programming it, it can be used as a suitable motion detector for Arduino projects.
Artículo No.: SE-101020020
8,10 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
17 pieza
· 1 - 3 días laborables
The Grove - ±5A DC/AC Current Sensor (ACS70331) is a high precision DC/AC current sensor based on ACS70331. The ACS70331EESATR-005B3 is Allegro?s high sensitivity, current sensor IC for <5 A current sensing applications.
Artículo No.: SE-101020615
12,20 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
15 pieza
· 1 - 3 días laborables
Grove - BMP280 I2C and SPI Barometric and Temperature Sensor is built around Bosch BMP280. It is a low-cost and high-precision environmental sensor measures the temperature and barometer. Grove - BMP280 supports both I2C and SPI communication and we provide the BMP280 Arduino library.
Artículo No.: SE-101020192
9,10 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
15 pieza
· 1 - 3 días laborables
Fast response Adjustable sensitivity Detects LPG, natural gas, town gas etc. Useful for gas leakage detection Grove compatible interface
Artículo No.: SE-101020056
8,10 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
10 pieza
· 1 - 3 días laborables
Grove - 3-Axis Digital Accelerometer(LIS3DHTR) is a low-cost 3 - Axis accelerometer which is based on the LIS3DHTR chip which provides multiple ranges and interfaces selection.
Artículo No.: SE-114020121
4,90 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
10 pieza
· 1 - 3 días laborables
Capable of withstand strong impact Wide dynamic range from 0.001Hz to 1000MHz Adjustable sensitivity Cost effective Grove connector compatible
Artículo No.: SE-101020031
6,40 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
10 pieza
· 1 - 3 días laborables
Grove - I2C High Accuracy Temp&Humi Sensor(SHT35), temperature, humidity, temperature sensor, humidity sensor, Temperature&Humidity, Temperature and Humidity
Artículo No.: SE-101020592
14,20 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
10 pieza
· 1 - 3 días laborables
The Grove - ADC for Load Cell (HX711) is a 24-bit A/D converter designed specifically for the load cell, it's quite easy to build your Arduino weight sensor system with this module.
Artículo No.: SE-101020712
4,00 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
10 pieza
· 1 - 3 días laborables
Concise design 5V working voltage Easy to use Low power consumption Grove compatible interface
Artículo No.: SE-101020018
3,00 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
10 pieza
· 1 - 3 días laborables
The new Grove - Temperature & Humidity Sensor is based on the DHT20 sensor. The DHT20 is an upgraded version of the DHT11, compared with the previous version, the temperature and humidity measurement accuracy are higher, and the measurement range is larger. It features I2C output which means easier to use.
Artículo No.: SE-101020932
7,60 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
10 pieza
· 1 - 3 días laborables
This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. It has three detection modes to take your readings (infrared mode, full-spectrum, and human visible mode) and can be used to measure the change in light intensity in various light situations with many popular microcontrollers.
Artículo No.: SE-101020030
6,20 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
9 pieza
· 1 - 3 días laborables
The Grove - Flame Sensor can be used to detect fire source or other light sources of the wavelength in the range of 760nm - 1100 nm
Artículo No.: SE-101020049
7,00 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
9 pieza
· 1 - 3 días laborables
Grove - Multichannel Gas Sensor V2 provides stable and reliable gases detecting function under the circumstances of any other four sorts of gases. It can detect a variety of gases, besides Carbon monoxide (CO), Nitrogen dioxide (NO2), Ethyl alcohol(C2H5CH), Volatile Organic Compounds (VOC), and etc.
Artículo No.: SE-101020820
28,50 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
9 pieza
· 1 - 3 días laborables
An Arduino-compatible TDS(Total Dissolved Solids) sensor/meter for measuring TDS levels in water to indicate the water quality. It can be implemented in fields such as homemade water filter, hydroponics, aquarium and others related to testing water quality.
Artículo No.: SE-101020753
13,10 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
9 pieza
· 1 - 3 días laborables
The Grove - 3-Axis Digital Compass is a digital compass sensor based on Bosch BMM150
Artículo No.: SE-101020492
12,60 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
9 pieza
· 1 - 3 días laborables
Der Grove Formaldehyd-Sensor kann Formaldehyd im Bereich von 0~1000 ppb mit geringer Querempfindlichkeit gegenüber Alkohol und hoher Stabilität von 6 Jahren Lebensdauer nachweisen. Der eingebaute RHT-Sensor sorgt dafür, dass er auch bei unterschiedlichen Temperaturen und Luftfeuchtigkeiten einwandfrei funktioniert. Die Daten werden über UART- und I2C-Ports übertragen.
Artículo No.: SE-101020972
55,10 €
inkl. MwSt zzgl. Versandkosten
Disponible immédiatement
9 pieza
· 1 - 3 días laborables
1 2 3
Últimos vistos

Cambie a la tienda adecuada ahora

Hemos establecido que no se encuentra en Alemania y que podemos ofrecerle mejores condiciones de envío en nuestra tienda para su ubicación.