1.54" 200×200 ePaper Display... kaufen bei BerryBase

Übersicht This is an E-Ink display module, 1.54inch, 200x200 resolution, with...plus

"1.54" 200×200 ePaper Display Modul mit SPI Interface"

Übersicht

This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Eigenschaften

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Spezifikationen

Operating voltage: 3.3V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 48mm × 33mm
Display size: 27.6mm × 27.6mm
Dot pitch: 0.138 × 0.138
Resolution: 200 × 200
Display color: black, white
Grey level: 2
Partial refresh time: 0.3s
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°

Interface

SYMBOL	DESCRIPTION
VCC	3.3V
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, low active

Lieferumfang

1.54inch e-Paper Module
Cable XH2.54 20cm 8Pin

Dokumentation / Downloads

http://www.waveshare.com/wiki/1.54inch_e-Paper_Module

Liens supplémentaires vers "1.54" 200×200 ePaper Display Modul mit SPI Interface"

plus

Fermer menu

Les données "1.54" 200×200 ePaper Display Modul mit SPI Interface"

Numéro d'article:	EINKM-154
Gross weight (in kg):	0.025
Fabricant:	Waveshare
Numéro du fabricant:	1.54inch e-Paper Module
Numéro de tarif douanier:	85285900
Pays d'origine:	Chine