2.7" 264×176 ePaper Display HAT für Raspberry Pi

  • RPI-EINK27
  • 18,90 € *

    y compris la TVA plus expédition et manutention

    Disponible immédiatement
    16 pièce · 1 - 3 jours ouvrés

    L'article ne peut pas être placé dans le panier, car max. 1 Raspberry Pi par client est autorisé.

    Remarquer

    Produits fréquemment achetés ensemble:
    2.7" 264×176 ePaper Display HAT für Raspberry Pi
    2.7" 264×176 ePaper Display HAT für Raspberry Pi
    18,90 €
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17,70 €
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    1,31 €
    Acryl Gehäuse für Raspberry Pi Zero W / WH transparent
    Acryl Gehäuse für Raspberry Pi Zero W / WH transparent
       
    1,85 €
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
       
    4,90 €
    =
    Total:
    44,66 €*
    TVA incluse. y compris les frais de port
    Produits fréquemment achetés ensemble:
    2.7" 264×176 ePaper Display HAT für Raspberry Pi
    2.7" 264×176 ePaper Display HAT für Raspberry Pi
    18,90 €
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17,70 €
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    1,31 €
    Acryl Gehäuse für Raspberry Pi Zero W / WH transparent
    Acryl Gehäuse für Raspberry Pi Zero W / WH transparent
       
    1,85 €
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
    Micro USB Netzteil für Raspberry Pi 5V / 2,5A schwarz
       
    4,90 €
    =
    Total:
    44,66 €*
    TVA incluse. y compris les frais de port
    Übersicht This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122...plus
    "2.7" 264×176 ePaper Display HAT für Raspberry Pi"
    Übersicht

    This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

    Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
    • Onboard 4x Keys
    • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Spezifikationen
    • Operating voltage: 3.3V
    • Interface: 3-wire SPI, 4-wire SPI
    • Outline dimension: 85mm × 56mm
    • Display size: 57.288mm × 38.192mm
    • Dot pitch: 0.217 × 0.217
    • Resolution: 264 × 176
    • Display color: black, white
    • Grey level: 2
    • Full refresh time: 6s
    • Refresh power: 24mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°

    Interface


    SYMBOL DESCRIPTION
    VCC 3.3V
    GND Ground
    NC NC
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active


    Lieferumfang
    • 2.7inch e-Paper HAT
    • RPi screws pack (2pcs)

    Dokumentation / Downloads
    Liens supplémentaires vers "2.7" 264×176 ePaper Display HAT für Raspberry Pi"
    Les données "2.7" 264×176 ePaper Display HAT für Raspberry Pi"
    Numéro d'article: RPI-EINK27
    Gross weight (in kg): 0.044
    Fabricant: Waveshare
    Numéro du fabricant: 2.7inch e-Paper HAT
    Numéro de tarif douanier: 84733080
    Pays d'origine: Chine
    Lire, écr. et débatt. des analyses…plus
    Évaluations de clients pour "2.7" 264×176 ePaper Display HAT für Raspberry Pi"
    5 29 nov. 2021

    __TS_HEADLINE__

    5.00
    Écrire une évaluation
    Les évaluations sont publiées après vérification.
    Veuillez saisir la série de nombres dans le champ de texte suivant.

    Les champs suivis d'un * sont des champs obligatoires.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Contenu 10 Meter (0,13 € * / 1 Meter)
    1,31 € *
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Contenu 10 Meter (0,19 € * / 1 Meter)
    1,90 € *
    Derniers articles consultés

    Passez maintenant à la boutique appropriée

    Nous avons établi que vous n'êtes pas en Allemagne et que nous pouvons vous offrir de meilleures conditions d'expédition pour votre emplacement dans notre boutique.