7.5" 800×480 ePaper Display HAT... kaufen bei BerryBase

Aperçu: 7.5" 640×384 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)

7.5" 640×384 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)

Cet article est indisponible actuellement

Avertissez-moi lorsque l'article sera de nouveau disponible.

56,90 € *

y compris la TVA plus expédition et manutention

L'article ne peut pas être placé dans le panier, car max. 1 Raspberry Pi par client est autorisé.

Attention :

Versandkostenfrei innerhalb Deutschlands

Fermer menu

Versandkostenfrei ab 29€

Bestellungen ab 29€ Warenwert sind bei uns generell Versandkostenfrei bei Lieferung innerhalb Deutschlands.

Maintenant, assurer points bonus

Übersicht This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800x480...plus

Fermer menu

"7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"

Übersicht

This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800x480 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Eigenschaften

No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Compatible with Raspberry Pi 2B/3B/Zero/Zero W
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Spezifikationen

Operating voltage: 3.3V
Interface: SPI
Outline dimension: 170.2mm × 111.2mm
Display size: 163.2mm × 97.92mm
Dot pitch: 0.205 × 0.204
Resolution: 800 × 480
Display color: red, black, white
Grey level: 2
Full refresh time: 16s
Refresh power: 48mW(typ.)
Standby power: <0.017mW
Viewing angle: >170°

Interface

SYMBOL	DESCRIPTION
VCC	3.3V
GND	Ground
DIN	SPI MOSI pin
CLK	SPI SCK pin
CS	SPI chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	External reset, low active
BUSY	Busy status output, low active

Lieferumfang

7.5inch e-Paper (B)
ePaper Driver HAT
RPi screws pack (2 pcs.)

Dokumentation / Downloads

https://www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B)

Liens supplémentaires vers "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"

plus

Fermer menu

Les données "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"

Numéro d'article:	3C-RPI-EINK75
Gross weight (in kg):	0.150
Fabricant:	Waveshare
Numéro du fabricant:	7.5inch e-Paper HAT (B)
Numéro de tarif douanier:	84733080
Pays d'origine:	Chine