10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB

  • WS-19358
  • 17,90 € *

    IVA inclusa più spese di spedizione

    Immediatamente disponibile
    21 pezzo · 1 - 3 giorni lavorativi

    L'article ne peut pas être placé dans le panier, car max. 1 Raspberry Pi par client est autorisé.

    Avviso

    Acquistati frequentemente insieme:
    10-DOF IMU Sensor Modul für Raspberry Pi Pico,
    10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB
    17,90 €
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
       
    4,10 €
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
       
    0,50 €
    Quad GPIO-Expander für Raspberry Pi Pico
    Quad GPIO-Expander für Raspberry Pi Pico
       
    9,90 €
    Raspberry Pi Pico W, RP2040 + WLAN Mikrocontroller-Board
    Raspberry Pi Pico W, RP2040 + WLAN Mikrocontroller-Board
       
    6,70 €
    =
    Total:
    39,10 €*
    IVA inclusa. comprese le spese di spedizione
    Acquistati frequentemente insieme:
    10-DOF IMU Sensor Modul für Raspberry Pi Pico,
    10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB
    17,90 €
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
    Raspberry Pi Pico, RP2040 Mikrocontroller-Board
       
    4,10 €
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
    Stiftleisten / Pin Header Set für Raspberry Pi Pico
       
    0,50 €
    Quad GPIO-Expander für Raspberry Pi Pico
    Quad GPIO-Expander für Raspberry Pi Pico
       
    9,90 €
    Raspberry Pi Pico W, RP2040 + WLAN Mikrocontroller-Board
    Raspberry Pi Pico W, RP2040 + WLAN Mikrocontroller-Board
       
    6,70 €
    =
    Total:
    39,10 €*
    IVA inclusa. comprese le spese di spedizione
    Das Pico-10DOF-IMU ist ein IMU-Sensor-Erweiterungsmodul, das für den Raspberry Pi Pico... altro
    "10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB"
    Das Pico-10DOF-IMU ist ein IMU-Sensor-Erweiterungsmodul, das für den Raspberry Pi Pico spezialisiert ist. Es enthält Sensoren wie Gyroskop, Beschleunigungsmesser, Magnetometer und Barozeptor und verwendet den I2C-Bus zur Kommunikation. In Kombination mit dem Raspberry Pi Pico kann es verwendet werden, um Umgebungsdaten wie Temperatur und Luftdruck zu erfassen oder einen Roboter zu bauen, der Bewegungsgesten und Orientierung erkennt.
    • Standard Raspberry Pi Pico Header, unterstützt die Raspberry Pi Pico Serie
    • Onboard ICM20948 (3-Achsen-Gyroskop, 3-Achsen-Beschleunigungsmesser und 3-Achsen-Magnetometer) zur Erkennung von Bewegungsgesten, Orientierung und Magnetfeld
    • Onboard LPS22HB barometrischer Drucksensor, zur Erkennung des atmosphärischen Drucks der Umgebung
    • Kommt mit Entwicklungsressourcen und Handbuch (Raspberry Pi Pico C/C++ und MicroPython Beispiele)
    Spezifikationen

    Betriebsspannung 5V
    Beschleunigungsmesser Auflösung: 16 Bit Messbereich (konfigurierbar): ±2, ±4, ±8, ±16g Betriebsstrom: 68,9uA
    Gyroskop Auflösung: 16 Bit Messbereich (konfigurierbar): ±250, ±500, ±1000, ±2000°/sec Betriebsstrom: 1,23mA
    Magnetometer Auflösung: 16-bit Messbereich: ±4900µT Betriebsstrom: 90uA
    Barozeptor Messbereich: 260 ~ 1260hPa Messgenauigkeit (normale Temperatur): ±0,025hPa Messgeschwindigkeit: 1Hz - 75Hz

    Raspberry Pi Pico Header-Kompatibilität: Onboard-Buchsenleiste zum direkten Anschluss an Raspberry Pi Pico Stapelbares Design.

    Raspberry Pi Pico ist NICHT im Lieferumfang enthalten.

    Was ist an Bord?
    1. ICM20948 9-achsiger Bewegungssensor, I2C-Bus
    2. LPS22HB Barometrischer Drucksensor, I2C-Bus
    3. RT9193-33 3,3V linearer Spannungsregler
    4. LSF0204PWR 4-Kanal-Spannungswandler
    1. RT9193-18 1,8V linearer Spannungsregler
    2. Leistungsanzeige
    3. Raspberry Pi Pico Stiftleiste zum Anschluss an Raspberry Pi Pico, stapelbares Design
    Dokumente und Downloads
    Link correlati a "10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB"
    Dati "10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB"
    Peso lordo (in kg): 0.010
    Codice articolo: WS-19358
    Fabbricante: Waveshare
    Numero del produttore: Pico-10DOF-IMU
    Numero della tariffa doganale: 84733020
    Paese d'origine: China
    Leggere, scrivere e discutere recensioni... altro
    Valutazione cliente per "10-DOF IMU Sensor Modul für Raspberry Pi Pico, ICM20948 und LPS22HB"
    Scrivi una valutazione
    Le valutazioni vengono attivate dopo la verifica.

    I campi contrassegnati con * sono obbligatori.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Contenuto 10 Meter (0,13 € * / 1 Meter)
    1,31 € *
    Visto

    Passa subito al negozio appropriato

    Abbiamo stabilito che non sei in Germania e che possiamo offrirti condizioni di spedizione migliori nel nostro negozio per la tua posizione.