2.13" 250×122 ePaper Display HAT für Raspberry Pi

  • RPI-EINK21
  • Questo prodotto non è attualmente disponibile.
    Informatemi non appena il prodotto è nuovamente disponibile.
    14,50 € *

    IVA inclusa più spese di spedizione

    L'article ne peut pas être placé dans le panier, car max. 1 Raspberry Pi par client est autorisé.
    Übersicht This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122... altro
    "2.13" 250×122 ePaper Display HAT für Raspberry Pi"
    Übersicht

    This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

    Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
    • Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Spezifikationen
    • Operating voltage: 3.3V
    • Interface: SPI
    • Outline dimension: 65mm × 30.2mm
    • Display size: 23.71mm × 48.55mm
    • Dot pitch: 0.194 × 0.194
    • Resolution: 250 × 122
    • Display color: black, white
    • Grey level: 2
    • Partial refresh time: 0.3s
    • Full refresh time: 2s
    • Refresh power: 26.4mV(typ.)
    • Standby power: <0.17mV
    • Viewing angle: >170°

    Interface


    SYMBOL DESCRIPTION
    VCC 3.3V
    GND Ground
    NC NC
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active


    Lieferumfang
    • 2.13inch e-Paper HAT
    • RPi screws pack (2pcs)
    • 9-pin 2.54 pitch SMD pinheader

    Dokumentation / Downloads
    Link correlati a "2.13" 250×122 ePaper Display HAT für Raspberry Pi"
    Dati "2.13" 250×122 ePaper Display HAT für Raspberry Pi"
    Codice articolo: RPI-EINK21
    Peso lordo (in kg): 0.027
    Fabbricante: Waveshare
    Numero del produttore: 2.13inch e-Paper HAT
    Numero della tariffa doganale: 85285900
    Paese d'origine: China
    Leggere, scrivere e discutere recensioni... altro
    Valutazione cliente per "2.13" 250×122 ePaper Display HAT für Raspberry Pi"
    5 24/giu/2022

    __TS_HEADLINE__

    5 24/ago/2020

    __TS_HEADLINE__

    Hat sehr leichtes ghosting aber trotzdem top

    5 16/dic/2019

    __TS_HEADLINE__

    Funktioniert beim ersten versuch. Gute Qualität.

    5 28/nov/2019

    __TS_HEADLINE__

    Support hat bestätigt dass es sich um die V2 handelt, habe auch die V2 erhalten. Top

    5.00
    Scrivi una valutazione
    Le valutazioni vengono attivate dopo la verifica.

    I campi contrassegnati con * sono obbligatori.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Contenuto 10 Meter (0,13 € * / 1 Meter)
    1,31 € *
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Contenuto 10 Meter (0,19 € * / 1 Meter)
    1,90 € *
    Visto

    Passa subito al negozio appropriato

    Abbiamo stabilito che non sei in Germania e che possiamo offrirti condizioni di spedizione migliori nel nostro negozio per la tua posizione.