5.83" 600×448 ePaper Display HAT für Raspberry Pi

  • RPI-EINK583
  • 59,50 € *

    IVA inclusa più spese di spedizione

    Immediatamente disponibile
    14 pezzo · 1 - 3 giorni lavorativi

    L'article ne peut pas être placé dans le panier, car max. 1 Raspberry Pi par client est autorisé.

    Avviso

    Attenzione:

    Versandkostenfrei innerhalb Deutschlands

    Versandkostenfrei ab 29€

    Bestellungen ab 29€ Warenwert sind bei uns generell Versandkostenfrei bei Lieferung innerhalb Deutschlands.

    Acquistati frequentemente insieme:
    5.83" 600×448 ePaper Display HAT für Raspberry Pi
    5.83" 600×448 ePaper Display HAT für Raspberry Pi
    59,50 €
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    1,31 €
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17,70 €
    Raspberry Pi Zero W
    Raspberry Pi Zero W
       
    16,50 €
    40 Pin GPIO Header für Raspberry Pi, farbig kodiert, Extended Version
    40 Pin GPIO Header für Raspberry Pi, farbig kodiert, Extended Version
       
    1,20 €
    =
    Total:
    96,21 €*
    IVA inclusa. comprese le spese di spedizione
    Acquistati frequentemente insieme:
    5.83" 600×448 ePaper Display HAT für Raspberry Pi
    5.83" 600×448 ePaper Display HAT für Raspberry Pi
    59,50 €
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    1,31 €
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17,70 €
    Raspberry Pi Zero W
    Raspberry Pi Zero W
       
    16,50 €
    40 Pin GPIO Header für Raspberry Pi, farbig kodiert, Extended Version
    40 Pin GPIO Header für Raspberry Pi, farbig kodiert, Extended Version
       
    1,20 €
    =
    Total:
    96,21 €*
    IVA inclusa. comprese le spese di spedizione
    Übersicht This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution,... altro
    "5.83" 600×448 ePaper Display HAT für Raspberry Pi"
    Übersicht
    This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface.

    Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
    • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Spezifikationen
    • Operating voltage: 3.3V
    • Interface: SPI
    • Outline dimension: 125.40mm × 99.50mm
    • Display size: 118.80mm × 88.26mm
    • Dot pitch: 0.198 × 0.197
    • Resolution: 600 × 448
    • Display color: black, white
    • Grey level: 2
    • Full refresh time: 3.5s
    • Refresh power: 26.4mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°

      Interface

      SYMBOL DESCRIPTION
      VCC 3.3V
      GND Ground
      DIN SPI MOSI pin
      CLK SPI SCK pin
      CS SPI chip selection, low active
      DC Data/Command selection (high for data, low for command)
      RST External reset, low active
      BUSY Busy status output, low active


      Lieferumfang
      • 5.83inch e-Paper
      • ePaper Driver HAT
      • RPi screws pack (2 pcs.)
      • PH2.0 20cm 8Pin

      Dokumentation / Downloads
      Link correlati a "5.83" 600×448 ePaper Display HAT für Raspberry Pi"
      Dati "5.83" 600×448 ePaper Display HAT für Raspberry Pi"
      Codice articolo: RPI-EINK583
      Peso lordo (in kg): 0.123
      Dimensione dello schermo: 5,83 Zoll
      Fabbricante: Waveshare
      Numero del produttore: 5.83inch e-Paper HAT
      Numero della tariffa doganale: 84733080
      Paese d'origine: China
      Leggere, scrivere e discutere recensioni... altro
      Valutazione cliente per "5.83" 600×448 ePaper Display HAT für Raspberry Pi"
      Scrivi una valutazione
      Le valutazioni vengono attivate dopo la verifica.

      I campi contrassegnati con * sono obbligatori.

      Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
      Contenuto 10 Meter (0,13 € * / 1 Meter)
      1,31 € *
      Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
      Contenuto 10 Meter (0,19 € * / 1 Meter)
      1,90 € *
      Visto

      Passa subito al negozio appropriato

      Abbiamo stabilito che non sei in Germania e che possiamo offrirti condizioni di spedizione migliori nel nostro negozio per la tua posizione.