7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)

  • 3C-RPI-EINK75
  • Questo prodotto non è attualmente disponibile.
    Informatemi non appena il prodotto è nuovamente disponibile.
    56,90 € *

    IVA inclusa più spese di spedizione

    L'article ne peut pas être placé dans le panier, car max. 1 Raspberry Pi par client est autorisé.
    Attenzione:

    Versandkostenfrei innerhalb Deutschlands

    Versandkostenfrei ab 29€

    Bestellungen ab 29€ Warenwert sind bei uns generell Versandkostenfrei bei Lieferung innerhalb Deutschlands.

    Übersicht This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800x480... altro
    "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Übersicht

    This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800x480 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.

    Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
    • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Spezifikationen
    • Operating voltage: 3.3V
    • Interface: SPI
    • Outline dimension: 170.2mm × 111.2mm
    • Display size: 163.2mm × 97.92mm
    • Dot pitch: 0.205 × 0.204
    • Resolution: 800 × 480
    • Display color: red, black, white
    • Grey level: 2
    • Full refresh time: 16s
    • Refresh power: 48mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°

    Interface

    SYMBOL DESCRIPTION
    VCC 3.3V
    GND Ground
    DIN SPI MOSI pin
    CLK SPI SCK pin
    CS SPI chip selection, low active
    DC Data/Command selection (high for data, low for command)
    RST External reset, low active
    BUSY Busy status output, low active


    Lieferumfang
    • 7.5inch e-Paper (B)
    • ePaper Driver HAT
    • RPi screws pack (2 pcs.)

    Dokumentation / Downloads
    Link correlati a "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Dati "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    Codice articolo: 3C-RPI-EINK75
    Peso lordo (in kg): 0.150
    Fabbricante: Waveshare
    Numero del produttore: 7.5inch e-Paper HAT (B)
    Numero della tariffa doganale: 84733080
    Paese d'origine: China
    Leggere, scrivere e discutere recensioni... altro
    Valutazione cliente per "7.5" 800×480 ePaper Display HAT für Raspberry Pi, dreifarbig (rot, schwarz, weiß)"
    5 09/ago/2018

    __TS_HEADLINE__

    Genau wie erwartet, alles funktioniert wie erwartet.

    5.00
    Scrivi una valutazione
    Le valutazioni vengono attivate dopo la verifica.

    I campi contrassegnati con * sono obbligatori.

    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Contenuto 10 Meter (0,19 € * / 1 Meter)
    1,90 € *
    Visto

    Passa subito al negozio appropriato

    Abbiamo stabilito che non sei in Germania e che possiamo offrirti condizioni di spedizione migliori nel nostro negozio per la tua posizione.