9.7" 1200x825 ePaper Display HAT für Raspberry Pi

  • RPI-EINK97
  • 189,90 € *

    IVA inclusa

    Immediatamente disponibile
    4 pezzo · 1 - 3 giorni lavorativi

    L'article ne peut pas être placé dans le panier, car max. 1 Raspberry Pi par client est autorisé.

    Avviso

    Attenzione:

    Versandkostenfrei innerhalb Deutschlands

    Versandkostenfrei ab 29€

    Bestellungen ab 29€ Warenwert sind bei uns generell Versandkostenfrei bei Lieferung innerhalb Deutschlands.

    Acquistati frequentemente insieme:
    9.7" 1200x825 ePaper Display HAT für Raspberry Pi
    9.7" 1200x825 ePaper Display HAT für Raspberry Pi
    189,90 €
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17,70 €
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    1,31 €
    offizielles Raspberry Pi USB-C Netzteil 5,1V / 3,0A, EU, schwarz
    offizielles Raspberry Pi USB-C Netzteil 5,1V / 3,0A, EU, schwarz
       
    7,90 €
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
       
    7,85 €
    =
    Total:
    224,66 €*
    IVA inclusa. comprese le spese di spedizione
    Acquistati frequentemente insieme:
    9.7" 1200x825 ePaper Display HAT für Raspberry Pi
    9.7" 1200x825 ePaper Display HAT für Raspberry Pi
    189,90 €
    Raspberry Pi Zero WH
    Raspberry Pi Zero WH
       
    17,70 €
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
    Kupferlitze isoliert, 1x0,14mm, 10m schwarz
       
    1,31 €
    offizielles Raspberry Pi USB-C Netzteil 5,1V / 3,0A, EU, schwarz
    offizielles Raspberry Pi USB-C Netzteil 5,1V / 3,0A, EU, schwarz
       
    7,90 €
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
    SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB
       
    7,85 €
    =
    Total:
    224,66 €*
    IVA inclusa. comprese le spese di spedizione
    Übersicht This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825... altro
    "9.7" 1200x825 ePaper Display HAT für Raspberry Pi"
    Übersicht

    This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface.

    Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Low power consumption, basically power is only required for refreshing
    • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
    • USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/STM32)

    Spezifikationen
    • Operating voltage: 5V
    • Interface: USB/SPI/I80/I2C
    • Outline dimension: 218.8mm × 156.425mm × 1.15mm
    • Display size: 202.8mm × 139.425mm
    • Dot pitch: 0.169 × 0.169
    • Resolution: 1200 × 825
    • Display color: black, white
    • Gray scale: 2-16 (1-4 bit)
    • Full refresh time: <1s
    • Total refresh power: 0.6W(typ.)
    • Total standby power: 0.3W(typ.)
    • Viewing angle: >170°

    Interface
    SYMBOLDESCRIPTION
    5V Power input
    GND Ground
    MISO SPI MISO pin
    MOSI SPI MOSI pin
    SCK SPI SCK pin
    CS SPI chip selection, low active
    RST External reset, low active
    HRDY Busy status output, low active


    Lieferumfang
    • 9.7inch e-Paper x1
    • e-Paper IT8951 Driver HAT x1
    • 9.7inch e-Paper Adapter x1
    • 33PIN FFC (same side contact) x1
    • RPi screws pack (2pcs) x1
    • PH2.0 20cm 8Pin x1

    Dokumentation / Downloads
    Link correlati a "9.7" 1200x825 ePaper Display HAT für Raspberry Pi"
    Dati "9.7" 1200x825 ePaper Display HAT für Raspberry Pi"
    Codice articolo: RPI-EINK97
    Peso lordo (in kg): 0.430
    Dimensione dello schermo: 9,7 Zoll
    Fabbricante: Waveshare
    Numero del produttore: 9.7inch e-Paper HAT
    Numero della tariffa doganale: 84733080
    Paese d'origine: China
    Leggere, scrivere e discutere recensioni... altro
    Valutazione cliente per "9.7" 1200x825 ePaper Display HAT für Raspberry Pi"
    5 12/dic/2019

    __TS_HEADLINE__

    Beeindruckendes Display. Gute Graustufendarstellung, schnelle Anzeige, gute Auflösung. Das Weiß ist etwas dunkler als beim 4.2" Display (vielleicht wg. der Graustufen), daher im Vergleich nicht ganz so kontraststark. Wegen der matten Beschichtung sehr angenehm lesbar.

    5.00
    Scrivi una valutazione
    Le valutazioni vengono attivate dopo la verifica.

    I campi contrassegnati con * sono obbligatori.

    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Contenuto 10 Meter (0,13 € * / 1 Meter)
    1,31 € *
    Visto

    Passa subito al negozio appropriato

    Abbiamo stabilito che non sei in Germania e che possiamo offrirti condizioni di spedizione migliori nel nostro negozio per la tua posizione.