Passa al contenuto principale Salta alla ricerca Passa alla navigazione principale

Menu

Salta la galleria dei prodotti

I clienti hanno anche comprato

Elecrow Crowtail Steckverbinder JST-PH 2.0, 4-Pin, 2,0mm Rastermaß, ohne Kabel, 10 Stück Elecrow Crowtail Steckverbinder JST-PH 2.0, 4-Pin, 2,0mm Rastermaß, ohne Kabel, 10 Stück
Elecrow
CPC30404C
Elecrow Crowtail Steckverbinder JST-PH 2.0, 4-Pin, 2,0mm Rastermaß, ohne Kabel, 10 Stück

1,00 €

Disponibile, tempi di consegna: 1-3 Tage

2in1 microSD Cardreader mit USB-A und USB-C Stecker, USB 2.0, schwarz 2in1 microSD Cardreader mit USB-A und USB-C Stecker, USB 2.0, schwarz
BerryBase
125454
2in1 microSD Cardreader mit USB-A und USB-C Stecker, USB 2.0, schwarz

3,90 €

Disponibile, tempi di consegna: 1-3 Tage

5V 4 Kanal Relais Modul 5V 4 Kanal Relais Modul

Valutazione media di 5 su 5 stelle

BerryBase
RELM-4
5V 4 Kanal Relais Modul

3,80 €

Disponibile, tempi di consegna: 1-3 Tage

Breadboard mit 830 Kontakten Breadboard mit 830 Kontakten

Valutazione media di 4.6 su 5 stelle

BerryBase
BB-830P
Breadboard mit 830 Kontakten

1,90 €

Disponibile, tempi di consegna: 1-3 Tage

Raspberry Pi 5, 4GB RAM Raspberry Pi 5, 4GB RAM
Raspberry Pi Foundation
RPI5-4GB
Raspberry Pi 5, 4GB RAM

116,50 €

Disponibile, tempi di consegna: 1-3 Tage

40pin Jumper / Dupont Kabel Set, je 1x F-F / M-M / F-M, 20cm 40pin Jumper / Dupont Kabel Set, je 1x F-F / M-M / F-M, 20cm

Valutazione media di 4.2 su 5 stelle

BerryBase
DUPK-SET-20
40pin Jumper / Dupont Kabel Set, je 1x F-F / M-M / F-M, 20cm

4,90 €

Disponibile, tempi di consegna: 1-3 Tage

120-teiliges Messing Abstandshalter Sortiment in Kunststoffbox, Größe: M2,5

Valutazione media di 4.5 su 5 stelle

BerryBase
DBSET-M2.5
120-teiliges Messing Abstandshalter Sortiment in Kunststoffbox, Größe: M2,5

12,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Base Shield 2.1 für Raspberry Pi, UART I2C Analog Digital, MCP3008 Elecrow Crowtail Base Shield 2.1 für Raspberry Pi, UART I2C Analog Digital, MCP3008
Elecrow
CT0068BSR
Elecrow Crowtail Base Shield 2.1 für Raspberry Pi, UART I2C Analog Digital, MCP3008

6,90 €

Disponibile, tempi di consegna: 1-3 Tage

SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB

Valutazione media di 4.8 su 5 stelle

SanDisk
619659155827
SanDisk Extreme micro SDHC A1 UHS-I U3 Speicherkarte + Adapter 32GB

21,70 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Stackable Shield für Raspberry Pi, GPIO 10x, IIC, UART, JST-PH 2,0 4-Pin Elecrow Crowtail Stackable Shield für Raspberry Pi, GPIO 10x, IIC, UART, JST-PH 2,0 4-Pin
Elecrow
PSMC18002C
Elecrow Crowtail Stackable Shield für Raspberry Pi, GPIO 10x, IIC, UART, JST-PH 2,0 4-Pin

3,50 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail-DHT20 Sensor, Temperatur- und Feuchtigkeitsmessung, I2C, JST-PH 2.0, 2,2-5,5V Elecrow Crowtail-DHT20 Sensor, Temperatur- und Feuchtigkeitsmessung, I2C, JST-PH 2.0, 2,2-5,5V
Elecrow
CRT10251D
Elecrow Crowtail-DHT20 Sensor, Temperatur- und Feuchtigkeitsmessung, I2C, JST-PH 2.0, 2,2-5,5V

3,50 €

Disponibile, tempi di consegna: 1-3 Tage

Breadboard mit 400 Kontakten Breadboard mit 400 Kontakten

Valutazione media di 4.6 su 5 stelle

BerryBase
BB-400P
Breadboard mit 400 Kontakten

1,50 €

Disponibile, tempi di consegna: 1-3 Tage

RTC Batterie / Akku für Raspberry Pi 5
Raspberry Pi Foundation
RPI-RTCBAT
RTC Batterie / Akku für Raspberry Pi 5

5,70 €

Disponibile, tempi di consegna: 1-3 Tage

seeed Grove - 4 Port I2C Hub

Valutazione media di 5 su 5 stelle

seeed
SE-103020006
seeed Grove - 4 Port I2C Hub

2,50 €

Disponibile, tempi di consegna: 1-3 Tage

Stiftleisten / Pin Header Set für Raspberry Pi Pico

Valutazione media di 4.9 su 5 stelle

BerryBase
RPIP-PINH
Stiftleisten / Pin Header Set für Raspberry Pi Pico

0,50 €

Disponibile, tempi di consegna: 1-3 Tage

Raspberry Pi Active Cooler, Lüfter für Raspberry Pi 5
Raspberry Pi Foundation
RPI5-ACOOL
Raspberry Pi Active Cooler, Lüfter für Raspberry Pi 5

5,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail-Encoder 2.0, inkrementeller Drehgeber, 20 Impulse/Umdrehung, JST-PH 4-Pin, 5,0V Elecrow Crowtail-Encoder 2.0, inkrementeller Drehgeber, 20 Impulse/Umdrehung, JST-PH 4-Pin, 5,0V
Elecrow
CT0004EN
Elecrow Crowtail-Encoder 2.0, inkrementeller Drehgeber, 20 Impulse/Umdrehung, JST-PH 4-Pin, 5,0V

2,70 €

Disponibile, tempi di consegna: 1-3 Tage

Raspberry Pi Pico, RP2040 Mikrocontroller-Board Raspberry Pi Pico, RP2040 Mikrocontroller-Board

Valutazione media di 4.9 su 5 stelle

Raspberry Pi Foundation
RPI-PICO
Raspberry Pi Pico, RP2040 Mikrocontroller-Board

4,10 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V
Elecrow
CRT02131P
Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V

4,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail- I2C Hub 2.0, Crowtail Base Shield Erweiterung, 4x 4-Pin I2C-Schnittstellen Elecrow Crowtail- I2C Hub 2.0, Crowtail Base Shield Erweiterung, 4x 4-Pin I2C-Schnittstellen
Elecrow
CRT00529H
Elecrow Crowtail- I2C Hub 2.0, Crowtail Base Shield Erweiterung, 4x 4-Pin I2C-Schnittstellen

1,90 €

Disponibile, tempi di consegna: 1-3 Tage

40pin Jumper / Dupont Kabel Male – Male trennbar

Valutazione media di 4.6 su 5 stelle

BerryBase
DUPONT-MM
40pin Jumper / Dupont Kabel Male – Male trennbar

Da 1,60 €

Disponibile, tempi di consegna: 1-3 Tage

40 Pin GPIO Stacking Header für Raspberry Pi, farbig kodiert, 6,2mm 40 Pin GPIO Stacking Header für Raspberry Pi, farbig kodiert, 6,2mm

Valutazione media di 4.8 su 5 stelle

BerryBase
RPI-CGST-62
40 Pin GPIO Stacking Header für Raspberry Pi, farbig kodiert, 6,2mm

1,90 €

Disponibile, tempi di consegna: 1-3 Tage

Verlängerungskabel, 2 Pin JST PH 2.0mm Stecker - Buchse, AWG24, 50cm
BerryBase
VK-PH20-50
Verlängerungskabel, 2 Pin JST PH 2.0mm Stecker - Buchse, AWG24, 50cm

0,90 €

Disponibile, tempi di consegna: 1-3 Tage

seeed Grove Shield für Raspberry Pi Pico, v1.0 seeed Grove Shield für Raspberry Pi Pico, v1.0

Valutazione media di 4.5 su 5 stelle

seeed
SE-103100142
seeed Grove Shield für Raspberry Pi Pico, v1.0

4,90 €

Disponibile, tempi di consegna: 1-3 Tage

Descrizione

Info sui prodotti "Elecrow Crowtail-Kabel, JST-PH 2.0 4-Pin Verbindungskabel für Module, 20,5 cm, 5 Stück"

Elecrow Crowtail-Kabel, JST-PH 2.0 4-Pin Verbindungskabel
Ein 4-Pin-Crowtail-Kabel dient der Verbindung von Modulen mit einer Hauptsteuerplatine. Es ermöglicht die Signalübertragung sowie die Stromversorgung innerhalb eines Crowtail-Systems.

Das Kabel ist mit einem JST-PH 2.0 4-Pin-Anschluss ausgestattet und ermöglicht eine stabile und zuverlässige Verbindung zwischen kompatiblen Komponenten. Durch die modulare Bauweise entfällt das Löten, wodurch die Integration in bestehende Systeme erleichtert wird.

Crowtail ist ein modulares Elektroniksystem zur Verbindung von Sensoren, Aktoren und Mikrocontrollern. Es ermöglicht eine standardisierte Verbindung über vorkonfektionierte Kabel und Stecker. Dieses 4-Pin-Kabel stellt sicher, dass die Module ohne zusätzliche Lötarbeiten oder komplexe Verkabelung verwendet werden können.

Das Kabel wird häufig zur Verbindung von Ein- und Ausgangsmodulen mit Steuerplatinen im Bereich Arduino, DIY-Elektronik oder Schulungssysteme eingesetzt. Die einfache Handhabung reduziert Installationsaufwand und Konfigurationsfehler.

Das Produkt wird zur Herstellung elektrischer Verbindungen zwischen kompatiblen Komponenten eines Crowtail-Systems verwendet. Es verfügt über einen 4-poligen JST-PH 2.0-Stecker, der Signale und Strom überträgt. Die Anwendung erfolgt typischerweise im Rahmen elektronischer Projekte oder Schulungssysteme, in denen eine schnelle, lötfreie Verbindung zwischen Sensoren, Aktoren und Mikrocontrollern benötigt wird.

Merkmale im Überblick

  • 4-Pin-Anschluss für Crowtail-Module
  • Kompatibel mit Crowtail-Systemen
  • Ermöglicht eine einfache Verbindung ohne Löten
  • Länge: 20,5 cm
Kompatibilität
  • Geeignet für Crowtail-Module
  • Kompatibel mit Crowtail-kompatiblen Mikrocontrollern
Technische Daten
  • Kabellänge: 20,5 cm
  • 4-Pin-Anschluss
Sonstige Daten
  • Verbindungskabel für modulare Elektroniksysteme
Lieferumfang
  • 5 x 4-Pin-Crowtail-Kabel

Produttore

Elecrow

Elecrow – Kreative Elektroniklösungen für Bildung und Entwicklung

Elecrow ist ein führender Anbieter von Elektronik- und Bildungsprodukten, der innovative Tools und Plattformen für Schüler, Maker und Entwickler anbietet. Mit einem Schwerpunkt auf Kreativität, Benutzerfreundlichkeit und Vielseitigkeit unterstützt Elecrow Lernende und Profis dabei, ihre Projekte effizient umzusetzen.

Das Produktsortiment von Elecrow umfasst Mikrocontroller-Boards, Sensoren, Displays, Roboter-Kits und DIY-Bausätze. Besonders beliebt sind die CrowPi-Kits, die Raspberry Pi-basierte Bildungs- und Entwicklungstools bieten. Diese Kits sind ideal für den Einsatz in Schulen, Makerspaces und DIY-Projekten und fördern das Verständnis von Programmierung, Elektronik und Robotik.

Elecrow legt großen Wert auf Open-Source-Software und Hardware, um die Zugänglichkeit und Anpassbarkeit seiner Produkte zu gewährleisten. Viele Produkte sind mit Plattformen wie Arduino, Raspberry Pi und micro:bit kompatibel, was die Entwicklung und Umsetzung von Projekten erleichtert. Zudem bietet die Marke PCB-Fertigungs- und Prototyping-Dienstleistungen an, die Entwicklern bei der Realisierung maßgeschneiderter Designs helfen.

Mit einem klaren Fokus auf Qualität, Innovation und Unterstützung hat sich Elecrow als vertrauenswürdige Marke für Bildungs- und Entwicklungsprojekte etabliert. Die Produkte bieten eine ideale Plattform für kreatives Lernen und die Realisierung moderner Technologien und sind sowohl für Anfänger als auch für erfahrene Entwickler geeignet.

Hersteller- und Sicherheitsinformationen

Hersteller-Informationen
Elecrow
Nanchang Huafeng Industrial Park
CN 518126 Baoan District, Shenzhen
https://www.elecrow.com/
[email protected]

WEEE-Nummer: 85275112

Verantwortliche Person für die EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Sicherheitshinweise
  • Stellen Sie sicher, dass das Produkt nur mit kompatiblen Grove-Modulen und geeigneten Spannungen betrieben wird.
  • Vermeiden Sie den direkten Kontakt mit Wasser, Feuchtigkeit oder extremen Temperaturen.
  • Halten Sie das Produkt von Wärmequellen, entflammbaren Materialien und Chemikalien fern.
  • Verwenden Sie die Komponenten nur in gut belüfteten Umgebungen, um Überhitzung und Schäden zu vermeiden.
  • Berühren Sie keine Anschlusskontakte und Leiterbahnen während des Betriebs, um Kurzschlüsse zu verhindern.
  • Verwenden Sie geeignete Schutzmaßnahmen (wie ESD-Armbänder), um elektrostatische Schäden zu vermeiden.
  • Außer Reichweite von Kindern halten, da Kleinteile erstickungsgefährdend sein können.
  • Defekte oder beschädigte Module nicht mehr einsetzen und ordnungsgemäß entsorgen.
  • Elektronische Bauteile und Verpackung gemäß den örtlichen Vorschriften für Elektroschrott recyceln.

Valutazioni 0

0 di 0 valutazioni

Valutazione media di 0 su 5 stelle

Formula una valutazione!

Condividi le tue esperienze con il prodotto con altri clienti.


Salta la galleria dei prodotti

Ähnliche Artikel

seeed Grove - Universal 4 Pin Kabel, nicht fixierend, 20cm, 5er Pack

Valutazione media di 5 su 5 stelle

seeed
SE-110990031
seeed Grove - Universal 4 Pin Kabel, nicht fixierend, 20cm, 5er Pack

Contenuto: 5 Stück (0,50 € / 1 Stück)

2,50 €

Non più disponibile

Salta la galleria dei prodotti

Zubehör

Elecrow EasyESP-1 Entwicklerboard, ESP8266, USB-UART, 180-Punkt-Steckbrett, Grove/Crowtail-Anschluss Elecrow EasyESP-1 Entwicklerboard, ESP8266, USB-UART, 180-Punkt-Steckbrett, Grove/Crowtail-Anschluss
Elecrow
CDE82664E
Elecrow EasyESP-1 Entwicklerboard, ESP8266, USB-UART, 180-Punkt-Steckbrett, Grove/Crowtail-Anschluss

25,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Base Shield 2.1 für Raspberry Pi, UART I2C Analog Digital, MCP3008 Elecrow Crowtail Base Shield 2.1 für Raspberry Pi, UART I2C Analog Digital, MCP3008
Elecrow
CT0068BSR
Elecrow Crowtail Base Shield 2.1 für Raspberry Pi, UART I2C Analog Digital, MCP3008

6,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Stackable Shield für Raspberry Pi, GPIO 10x, IIC, UART, JST-PH 2,0 4-Pin Elecrow Crowtail Stackable Shield für Raspberry Pi, GPIO 10x, IIC, UART, JST-PH 2,0 4-Pin
Elecrow
PSMC18002C
Elecrow Crowtail Stackable Shield für Raspberry Pi, GPIO 10x, IIC, UART, JST-PH 2,0 4-Pin

3,50 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Base Shield 2.0 für Arduino, I2C UART Analog Digital, 4-Pin JST, 3,3-5V Elecrow Crowtail Base Shield 2.0 für Arduino, I2C UART Analog Digital, 4-Pin JST, 3,3-5V
Elecrow
CT0001BS
Elecrow Crowtail Base Shield 2.0 für Arduino, I2C UART Analog Digital, 4-Pin JST, 3,3-5V

4,50 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V
Elecrow
CRT02131P
Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V

4,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail- I2C Hub 2.0, Crowtail Base Shield Erweiterung, 4x 4-Pin I2C-Schnittstellen Elecrow Crowtail- I2C Hub 2.0, Crowtail Base Shield Erweiterung, 4x 4-Pin I2C-Schnittstellen
Elecrow
CRT00529H
Elecrow Crowtail- I2C Hub 2.0, Crowtail Base Shield Erweiterung, 4x 4-Pin I2C-Schnittstellen

1,90 €

Disponibile, tempi di consegna: 1-3 Tage

Salta la galleria dei prodotti

I clienti hanno anche visualizzato

Drehregler / Rotary Encoder mit Breakoutboard Drehregler / Rotary Encoder mit Breakoutboard

Valutazione media di 5 su 5 stelle

BerryBase
KY-040
Drehregler / Rotary Encoder mit Breakoutboard

1,60 €

Disponibile, tempi di consegna: 1-3 Tage

USB DC-Kabel mit Schalter USB Typ C Buchse - USB Typ C Stecker 0,30m schwarz USB DC-Kabel mit Schalter USB Typ C Buchse - USB Typ C Stecker 0,30m schwarz

Valutazione media di 4.9 su 5 stelle

BerryBase
125540
USB DC-Kabel mit Schalter USB Typ C Buchse - USB Typ C Stecker 0,30m schwarz

2,90 €

Disponibile, tempi di consegna: 1-3 Tage

Verlängerungskabel, 2 Pin JST PH 2.0mm Stecker - Buchse, AWG24, 50cm
BerryBase
VK-PH20-50
Verlängerungskabel, 2 Pin JST PH 2.0mm Stecker - Buchse, AWG24, 50cm

0,90 €

Disponibile, tempi di consegna: 1-3 Tage

Dupontkabel mit JST PH 2.0mm Steckverbinder, 20cm - Pinanzahl: 6 Pin Dupontkabel mit JST PH 2.0mm Steckverbinder, 20cm - Pinanzahl: 6 Pin
BerryBase
AKD-PH20-6P
Dupontkabel mit JST PH 2.0mm Steckverbinder, 20cm - Pinanzahl: 6 Pin

0,39 €

Disponibile, tempi di consegna: 1-3 Tage

Kabel mit JST PH 2.0mm Steckverbinder, AWG26, 20cm

Valutazione media di 4 su 5 stelle

BerryBase
AK-PH20
Kabel mit JST PH 2.0mm Steckverbinder, AWG26, 20cm

Da 0,33 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail-LED 2.0 digitales LED-Modul, PWM, Plattenmontage, 8mm LED, 4-Pin, 5V Elecrow Crowtail-LED 2.0 digitales LED-Modul, PWM, Plattenmontage, 8mm LED, 4-Pin, 5V
Elecrow
CROWTAIL-LED2
Elecrow Crowtail-LED 2.0 digitales LED-Modul, PWM, Plattenmontage, 8mm LED, 4-Pin, 5V

Da 1,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Relay 2.0, JST-PH 4-Pin, SPST, 5V Steuerung, 30A Schaltleistung, 240VAC, 30VDC Elecrow Crowtail Relay 2.0, JST-PH 4-Pin, SPST, 5V Steuerung, 30A Schaltleistung, 240VAC, 30VDC
Elecrow
CT0008RE
Elecrow Crowtail Relay 2.0, JST-PH 4-Pin, SPST, 5V Steuerung, 30A Schaltleistung, 240VAC, 30VDC

1,90 €

Disponibile, tempi di consegna: 1-3 Tage

L298N Dual H-Bridge Motor Treiber Modul L298N Dual H-Bridge Motor Treiber Modul
BerryBase
MOD-L298N
L298N Dual H-Bridge Motor Treiber Modul

3,30 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail-Button 1.0, Momentanschalter, digital, Panel-Mount, inkl. JST-PH 2.0 3-Pin Kabel Elecrow Crowtail-Button 1.0, Momentanschalter, digital, Panel-Mount, inkl. JST-PH 2.0 3-Pin Kabel
Elecrow
CT0002BT1-G
Elecrow Crowtail-Button 1.0, Momentanschalter, digital, Panel-Mount, inkl. JST-PH 2.0 3-Pin Kabel
Farbe: grün

1,90 €

Disponibile, tempi di consegna: 1-3 Tage

USB Type C Kabel mit offenem Kabelende zur Stromversorgung

Valutazione media di 4.9 su 5 stelle

BerryBase
USBCoffen
USB Type C Kabel mit offenem Kabelende zur Stromversorgung

Da 1,70 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Steckverbinder JST-PH 2.0, 4-Pin, 2,0mm Rastermaß, ohne Kabel, 10 Stück Elecrow Crowtail Steckverbinder JST-PH 2.0, 4-Pin, 2,0mm Rastermaß, ohne Kabel, 10 Stück
Elecrow
CPC30404C
Elecrow Crowtail Steckverbinder JST-PH 2.0, 4-Pin, 2,0mm Rastermaß, ohne Kabel, 10 Stück

1,00 €

Disponibile, tempi di consegna: 1-3 Tage

Batteriehalter für 3x Mignon AA mit Cover und Schalter, JST Stecker Batteriehalter für 3x Mignon AA mit Cover und Schalter, JST Stecker
SparkFun
PRT-18769
Batteriehalter für 3x Mignon AA mit Cover und Schalter, JST Stecker

2,60 €

Disponibile, tempi di consegna: 1-3 Tage

ACT-Motor Nema17 Stepper Motor, 17HS4417P1-X4, 1.8° Schrittwinkel, 0.4 Nm Haltemoment, 1.7A
ACT-Motor
ACT-17HS4417P
ACT-Motor Nema17 Stepper Motor, 17HS4417P1-X4, 1.8° Schrittwinkel, 0.4 Nm Haltemoment, 1.7A

12,50 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow RA-08H LoRaWAN Node Board mit RP2040, 868MHz, LoRa, SMA, USB-C, Solarbetrieb Elecrow RA-08H LoRaWAN Node Board mit RP2040, 868MHz, LoRa, SMA, USB-C, Solarbetrieb
Elecrow
CRT01261N
Elecrow RA-08H LoRaWAN Node Board mit RP2040, 868MHz, LoRa, SMA, USB-C, Solarbetrieb

15,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Protoboard 2.0, Lochrasterplatine, 4-Pin Kabel, S0 S1 VCC GND, 2,54mm Raster Elecrow Crowtail Protoboard 2.0, Lochrasterplatine, 4-Pin Kabel, S0 S1 VCC GND, 2,54mm Raster
Elecrow
CT008726P
Elecrow Crowtail Protoboard 2.0, Lochrasterplatine, 4-Pin Kabel, S0 S1 VCC GND, 2,54mm Raster

0,90 €

Disponibile, tempi di consegna: 1-3 Tage

Aqara FP2 Anwesenheitssensor, Radartechnologie, Multi-Personen & Sturzerkennung Aqara FP2 Anwesenheitssensor, Radartechnologie, Multi-Personen & Sturzerkennung
Aqara
AQA-Radar2
Aqara FP2 Anwesenheitssensor, Radartechnologie, Multi-Personen & Sturzerkennung

69,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Speaker 2.0 Audioausgabe-Modul, integrierter Verstärker, Potentiometer, 20kHz, 5V Elecrow Crowtail Speaker 2.0 Audioausgabe-Modul, integrierter Verstärker, Potentiometer, 20kHz, 5V
Elecrow
CT009440S
Elecrow Crowtail Speaker 2.0 Audioausgabe-Modul, integrierter Verstärker, Potentiometer, 20kHz, 5V

3,50 €

Disponibile, tempi di consegna: 1-3 Tage

USB 2.0 Typ C Stecker, nach oben/unten gewinkelt, für DIY USB Kabel USB 2.0 Typ C Stecker, nach oben/unten gewinkelt, für DIY USB Kabel
BerryBase
125469
USB 2.0 Typ C Stecker, nach oben/unten gewinkelt, für DIY USB Kabel

2,50 €

Disponibile, tempi di consegna: 1-3 Tage

Kamera für Raspberry Pi mit einstellbarem Fokus Kamera für Raspberry Pi mit einstellbarem Fokus

Valutazione media di 5 su 5 stelle

Waveshare
RPI-CAM-B
Kamera für Raspberry Pi mit einstellbarem Fokus

13,90 €

Disponibile, tempi di consegna: 1-3 Tage

Kabel mit JST XH 2.54mm Steckverbinder, AWG26, 20cm

Valutazione media di 4.3 su 5 stelle

BerryBase
AK-XH254
Kabel mit JST XH 2.54mm Steckverbinder, AWG26, 20cm

Da 0,35 €

Disponibile, tempi di consegna: 1-3 Tage

M5Stack Connector Grove to 4 Pin, 10 Stück M5Stack Connector Grove to 4 Pin, 10 Stück
M5Stack
M5-A099
M5Stack Connector Grove to 4 Pin, 10 Stück

5,55 €

Disponibile, tempi di consegna: 1-3 Tage

USB 2.0 Adapter / Verbinder, A Buchse - A Buchse, schwarz USB 2.0 Adapter / Verbinder, A Buchse - A Buchse, schwarz

Valutazione media di 5 su 5 stelle

goobay
50293
USB 2.0 Adapter / Verbinder, A Buchse - A Buchse, schwarz

0,90 €

Disponibile, tempi di consegna: 1-3 Tage

Adafruit Vibrierende Mini-Motorscheibe Adafruit Vibrierende Mini-Motorscheibe
Adafruit
ADA1201
Adafruit Vibrierende Mini-Motorscheibe

2,60 €

Disponibile, tempi di consegna: 1-3 Tage

Waveshare ESP32-S3 Touch-LCD, 4.3 Zoll, 800x480, LX7, WiFi, Bluetooth, 8MB PSRAM,I2C, 240Mhz Waveshare ESP32-S3 Touch-LCD, 4.3 Zoll, 800x480, LX7, WiFi, Bluetooth, 8MB PSRAM,I2C, 240Mhz
Waveshare
WS-25948
Waveshare ESP32-S3 Touch-LCD, 4.3 Zoll, 800x480, LX7, WiFi, Bluetooth, 8MB PSRAM,I2C, 240Mhz

39,90 €

Disponibile, tempi di consegna: 1-3 Tage

Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V
Elecrow
CRT02131P
Elecrow Crowtail Shield für Raspberry Pi Pico, 3 Analog-, 3 Digital-Ports, 2 UART, 2x I2C, SPI, 5V

4,90 €

Disponibile, tempi di consegna: 1-3 Tage

I nostri consigli per te

Loading...