Chiudi filtri

Filter

 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
da a
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

Componenti

Nessun risultato trovato per il filtro!
Dieser Stacking Header sorgt für Platz zwischen Raspberry Pi und Erweiterungsboards.
Articolo no.: STACKH-2X20P
120 teiliges Abstandshalter Sortiment in Kunststoffbox.
Ideal geeignet um Erweiterungsboards mit Raspberry Pi, Arduino und Co zu verbinden.
Articolo no.: DBSET-M2.5
12,90 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
437 pezzo
· 1 - 3 giorni lavorativi
- Steckverbinder: Stiftleiste
- Steckverbinder-Typ: Stift
- Steckverbinder-Art: männlich
- Anzahl Pole: 40
- Räumliche Orientierung: gerade
- Kontaktraster: 2.54mm
- Elektrische Montage: THT
- Steckverbinder-Ausgangssystem: 2x20
- Kontaktbeschichtung: gold flash
- Ausgangsmaße: L 3mm
Articolo no.: PINH-2X20P
0,40 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
1.547 pezzo
· 1 - 3 giorni lavorativi
- 2 Reihen mit 20 Buchsen
- 2,54mm Pinabstand (Pitch)
- Buchsen-Höhe: ca. 8,5mm
- Pin-Höhe: ca. 3mm
Articolo no.: FEMH-2X20P
0,45 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
927 pezzo
· 1 - 3 giorni lavorativi
Klinkenstecker - 3,5 mm - stereo
Metallausführung mit Knickschutz, 4 Kontakte
Articolo no.: 27693
0,55 €
IVA inclusa più spese di spedizione
Disponibile dal produttore
1.060 pezzo ·
2 - 5 giorni lavorativi
90° abgewinkelte Stiftleiste passend unter anderem für Raspberry Pi Zero.

- 2 Pin-Reihen mit je 20 Pins
- 90° gewinkelt
- 2,54mm Pinabstand (Pitch)
- Pin Höhe: 6 / 6 mm
- Gesamt Höhe: ca. 13 mm
- trennbar nach jedem Pin Paar
Articolo no.: PINH-2X20P-90
0,45 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
23 pezzo
· 1 - 3 giorni lavorativi
- Steckverbinder-Typ: U.FL (IPX/AMC)
- Steckverbinder: Buchse
- Wellenwiderstand: 50Ω
- Elektrische Montage: SMT
- Steckverbinder-Art: männlich
Articolo no.: UFLS-SMD
0,46 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
193 pezzo
· 1 - 3 giorni lavorativi
- 2 Reihen mit je 20 Buchsen
- 2,54mm Pinabstand (Pitch)
- Buchsen-Höhe: ca. 7,5 mm
- Pin-Höhe: ca. 3 mm
Articolo no.: PBL-2X20P
1,70 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
15 pezzo
· 1 - 3 giorni lavorativi
Klinkenstecker - 3,5 mm - stereo
Plastikausführung mit Knickschutz, 4 Kontakte
Articolo no.: 11578
Winkel-Klinkenstecker / 3,5 mm / 4 polig

Passend zum Beispiel für:
- Kopfhörer & Mikrofonbuchse bei vielen aktuellen Smartphones (Apple iPhone, Samsung Galaxy) und Tablets
- Kombinierte Video / Audio Buchse an vielen Digitalkameras und Camcorder oder am Raspberry Pi
Articolo no.: WKST35P4
1,20 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
254 pezzo
· 1 - 3 giorni lavorativi
Dieser farbig kodierter Pin Header eignet sich ideal für den Einsatz mit dem Raspberry Pi Zero.
Alle Pins sind mit entsprechenden Funktionen farbig kodiert und erleichtern das Prototypen und Hacken.
Articolo no.: RPI-CGPIOH
1,20 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
4.259 pezzo
· 1 - 3 giorni lavorativi
Dieser Erweiterungs-Header ist erforderlich, wenn ein Stacking Header zusammen mit dem PoE HAT am am Raspberry Pi 4 / 3 B+ genutzt werden soll.
Articolo no.: ERW-POEH
1,20 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
22 pezzo
· 1 - 3 giorni lavorativi
Mit diesem Hutschienenclip von Delock kann z. B. eine Platine oder ein Einplatinencomputer an einer 15 mm oder 35 mm breiten Hutschiene befestigt werden.
Articolo no.: D65961
7,50 €
IVA inclusa più spese di spedizione
Disponibile dal produttore
501 pezzo ·
5 - 10 Giorni lavorativi
Stiftleiste zweistöckig / stapelbar.
Passend u.a. auch für Raspberry Pi Zero.

- 2 Pin-Reihen mit je 20 Pins
- 2,54mm Pinabstand (Pitch)
- Gesamt Höhe: ca. 38 mm
- trennbar nach jedem Pin Paar
Articolo no.: PINH-38Z-2X20
2,90 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
7 pezzo
· 1 - 3 giorni lavorativi
420-teiliges Abstandshalter Sortiment aus Nylon in Kunststoffbox.
Ideal geeignet um Erweiterungsboards mit Raspberry Pi, Arduino und Co zu verbinden.
Articolo no.: DBSET-25-NW
13,90 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
208 pezzo
· 1 - 3 giorni lavorativi
830-teiliges Abstandshalter Sortiment aus Nylon in Kunststoffbox.
Ideal geeignet um Erweiterungsboards mit Raspberry Pi, Arduino und Co zu verbinden.
Articolo no.: DBSET-25-NB
13,90 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
18 pezzo
· 1 - 3 giorni lavorativi
Dieser farbig kodierte Stacking Header erweitert den GPIO Header aller Raspberry Pi Modelle um praktische Farbcodes und erleichtern so das Prototypen und Hacken. Die extra langen Pins eignen sich ideal in Kombination mit HATs wie beispielsweise dem Sense HAT.
Um bei aufgestecktem HAT weiterhin die farbige Kodierung zu haben, kann diese herausgenommen und über dem HAT angebracht werden.
Articolo no.: RPI-CGST-133
2,20 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
1.384 pezzo
· 1 - 3 giorni lavorativi
- 2 Reihen mit 20 Buchsen
- 2,54mm Pinabstand (Pitch)
- Buchsen-Höhe: ca. 8,5mm
- Pin-Höhe: ca. 3,2mm
Articolo no.: FEMH-G2X20P
2,20 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
73 pezzo
· 1 - 3 giorni lavorativi
Dieser farbig kodierte Stacking Header erweitert den GPIO Header aller Raspberry Pi Modelle um praktische Farbcodes und erleichtern so das Prototypen und Hacken. Zusätzlich wird der Zugriff durch die Erhöhung erleichtert.
Durch die gleiche Materialstärke der Pins, sitzen Dupont Kabel weiterhin genauso fest wie am originalen GPIO Header.
Articolo no.: RPI-CGST-62
1,90 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
3.079 pezzo
· 1 - 3 giorni lavorativi
Diese Buchsenleiste kann ohne Lötkenntnisse montiert werden. Durch die 40 Pins kann diese Buchsenleiste für Raspberry Pi HATs verwendet werden.
Articolo no.: SF-FEMH-2X20
1,90 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
5 pezzo
· 1 - 3 giorni lavorativi
Diese Stiftleiste kann ohne Lötkenntnisse montiert werden. Durch die 40 Pins kann die Stiftleiste auch für Raspberry Pi HATs oder den Raspberry Pi Zero verwendet werden.
Articolo no.: SF-PINH-2X20
Dieser Erweiterungs-Header ist erforderlich, wenn ein Stacking Header zusammen mit dem PoE HAT am am Raspberry Pi 4 / 3 B+ genutzt werden soll.
Version mit extra langen Pins.
Articolo no.: ERW-POEH2
Diese auf den Raspberry Pi 400 zugeschnittene Erweiterung macht die GPIO-Pins in einer aufrechten Form (wie bei den übrigen Pi-Modellen) verfügbar und bietet eine Farbkodierung der verschiedenen Pins.

Abmessungen: 56,2 x 33,3 mm
Articolo no.: RPI-GPIO-400
3,50 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
53 pezzo
· 1 - 3 giorni lavorativi
Diese auf den Raspberry Pi 400 zugeschnittene Erweiterung verdoppelt die GPIO-Pins und macht sie in einer aufrechten Form (wie bei den übrigen Pi-Modellen) verfügbar und bietet eine Farbkodierung der verschiedenen Pins.

Abmessungen: 56,2 x 40,2 mm
Articolo no.: RPI-GPIO-400B
4,90 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
64 pezzo
· 1 - 3 giorni lavorativi
Mit dieser extra hohen Buchsenleiste kann eine eigene Leiterplatte mit einem Raspberry Pi verbunden werden. Durch Nutzung dieses Headers, steht der Platz über den USB Buchsen und dem Ethernet Port zur Verfügung.
Articolo no.: FEMH-2X20-LV
1,60 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
106 pezzo
· 1 - 3 giorni lavorativi
Dieser farbig kodierter Pin Header eignet sich ideal für den Einsatz mit dem Raspberry Pi Zero.
Alle Pins sind mit entsprechenden Funktionen farbig kodiert und erleichtern das Prototypen und Hacken.
Articolo no.: RPI-CGPIOH-S
0,90 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
502 pezzo
· 1 - 3 giorni lavorativi
Mit diesen lötfreien Pogo-GPIO-Pins, Muttern, Schrauben und Abstandshaltern kannst du einen pHAT superschnell und einfach an deinen Pi Zero (oder Zero W) anschließen. Pogo-a-go-go!

Pogo-Pins sind federnd und werden normalerweise für Prüfvorrichtungen verwendet (wir benutzen sie dafür in der Werkstatt), aber es hat sich herausgestellt, dass sie eine supereinfache Möglichkeit sind, pHATs an Pi Zeros zu befestigen, ganz ohne Werkzeug! Wir haben diese Pins speziell so konstruieren lassen, dass sie genau die richtige Größe haben, um einen zuverlässigen elektrischen Kontakt zwischen Pi Zero und pHAT herzustellen.
Articolo no.: PIM330
9,80 €
IVA inclusa più spese di spedizione
Immediatamente disponibile
14 pezzo
· 1 - 3 giorni lavorativi
Visto

Passa subito al negozio appropriato

Abbiamo stabilito che non sei in Germania e che possiamo offrirti condizioni di spedizione migliori nel nostro negozio per la tua posizione.