Sparkfun MyoWare 2.0 Link Shield

  • DEV-18425
  • Questo prodotto non è attualmente disponibile.
    Informatemi non appena il prodotto è nuovamente disponibile.
    15,40 € *

    IVA inclusa più spese di spedizione

    L'article ne peut pas être placé dans le panier, car max. 1 Raspberry Pi par client est autorisé.
    Ordina direttamente gli accessori
    Sparkfun MyoWare 2.0 Cable Shield
    Sparkfun MyoWare 2.0 Cable Shield
    7,10 € *
    MyoWare 2.0 Arduino Shield
    MyoWare 2.0 Arduino Shield
    11,85 € *
    MyoWare 2.0 Reference Cable
    MyoWare 2.0 Reference Cable
    1,50 € *
    Sparkfun MyoWare 2.0 LED Shield
    Sparkfun MyoWare 2.0 LED Shield
    32,05 € *
    Ordina direttamente gli accessori
    Sparkfun MyoWare 2.0 Cable Shield
    Sparkfun MyoWare 2.0 Cable Shield
    7,10 € *
    MyoWare 2.0 Arduino Shield
    MyoWare 2.0 Arduino Shield
    11,85 € *
    MyoWare 2.0 Reference Cable
    MyoWare 2.0 Reference Cable
    1,50 € *
    Sparkfun MyoWare 2.0 LED Shield
    Sparkfun MyoWare 2.0 LED Shield
    32,05 € *
    Ordina direttamente gli accessori
    Sparkfun MyoWare 2.0 Cable Shield
    Sparkfun MyoWare 2.0 Cable Shield
    7,10 € *
    MyoWare 2.0 Arduino Shield
    MyoWare 2.0 Arduino Shield
    11,85 € *
    MyoWare 2.0 Reference Cable
    MyoWare 2.0 Reference Cable
    1,50 € *
    Sparkfun MyoWare 2.0 LED Shield
    Sparkfun MyoWare 2.0 LED Shield
    32,05 € *
    Ordina direttamente gli accessori
    Sparkfun MyoWare 2.0 Cable Shield
    Sparkfun MyoWare 2.0 Cable Shield
    7,10 € *
    MyoWare 2.0 Arduino Shield
    MyoWare 2.0 Arduino Shield
    11,85 € *
    MyoWare 2.0 Reference Cable
    MyoWare 2.0 Reference Cable
    1,50 € *
    Sparkfun MyoWare 2.0 LED Shield
    Sparkfun MyoWare 2.0 LED Shield
    32,05 € *
    Ordina direttamente gli accessori
    Sparkfun MyoWare 2.0 Cable Shield
    Sparkfun MyoWare 2.0 Cable Shield
    7,10 € *
    MyoWare 2.0 Arduino Shield
    MyoWare 2.0 Arduino Shield
    11,85 € *
    MyoWare 2.0 Reference Cable
    MyoWare 2.0 Reference Cable
    1,50 € *
    Sparkfun MyoWare 2.0 LED Shield
    Sparkfun MyoWare 2.0 LED Shield
    32,05 € *
    Das MyoWare® 2.0 Link Shield wurde entwickelt, um einen MyoWare 2.0 Muskelsensor einfach an... altro
    "Sparkfun MyoWare 2.0 Link Shield"
    Das MyoWare® 2.0 Link Shield wurde entwickelt, um einen MyoWare 2.0 Muskelsensor einfach an Ihren Arduino Mikrocontroller anzuschließen. Das Shield verfügt über eine 3,5 mm Klinkenbuchse, so dass Sie ein 3,5 mm Klinke-zu-Klinke-Kabel verwenden können, um die Boards miteinander zu verbinden. Das MyoWare 2.0 Link Shield verfügt über Snap-on-Anschlüsse auf der Platine, so dass Sie es einfach auf den MyoWare 2.0 Muskelsensor stapeln können.
     
    Außerdem befinden sich zwei Schalter auf der Platine. Einer wird für die Stromversorgung verwendet, während der andere den Ausgabemodus für das Roh-EMG (RAW), das gleichgerichtete (RECT) oder das Hüll-Kurvensignal (ENV) wählt. Zwei Status-LEDs sind für die Stromversorgung und das Hüll-Kurvensignal eingebaut. Ein Jumper für Referenz oder Masse ist ebenfalls vorhanden. Sie benötigen das MyoWare 2.0 Arduino Shield und ein Entwicklungsboard mit dem Arduino Uno R3 Footprint, um jeden MyoWare 2.0 Muskelsensor und Link Shield Stack anzuschließen.

    Hinweis: MyoWare und das Link Shield sind nicht zur Diagnose von Krankheiten oder anderen Zuständen oder zur Heilung, Linderung, Behandlung oder Vorbeugung von Krankheiten bei Menschen oder anderen Tieren bestimmt. Außerdem ist das 3,5-mm-Klinkenkabel nicht im Lieferumfang dieses Schildes enthalten. Dieses muss separat erworben werden.

    Das MyoWare® 2.0-Öcosystem besteht aus Shields, die einfach an den MyoWare® 2.0-Muskelsensor angeschlossen werden können, einen kostengünstigen, Arduino-kompatiblen All-in-One-Elektromyographie (EMG)-Sensor von Advancer Technologies. Das innovative Steckersystem ermöglicht es dem Benutzer, die Schilde mit einem kompakten, flachen Design einfach zusammenzustecken und an den analogen Eingang eines Mikrocontrollers anzuschließen, um die rohe, gefilterte und gleichgerichtete elektrische Aktivität eines Zielmuskels zu messen. Dadurch entfällt die Notwendigkeit, Verbindungen zwischen den Platinen herzustellen.
    Get Started with the MyoWare 2.0 Link Shield Guide

    Merkmale:
    • 3,5mm Klinkenstecker
    • Schalter
      • Ein/Aus für Strom
      • Ausgangswahl für RAW/RECT/ENV
    • LED-Anzeige
      • VIN
      • ENV
    • MyoWare® 2.0 Muskelsensor Formfaktor
      • 3x Female Snap Pins (Power und EMG Envelope Output)
    • Referenz/GND-Jumper
    • Abmessungen der Platine
      • 37,57mm x 35,90mm
    Dokumente:
    Link correlati a "Sparkfun MyoWare 2.0 Link Shield"
    Dati "Sparkfun MyoWare 2.0 Link Shield"
    Peso lordo (in kg): 0.006
    Codice articolo: DEV-18425
    Fabbricante: SparkFun
    Numero del produttore: DEV-18425
    Numero della tariffa doganale: 85423990
    Paese d'origine: USA
    Leggere, scrivere e discutere recensioni... altro
    Valutazione cliente per "Sparkfun MyoWare 2.0 Link Shield"
    Scrivi una valutazione
    Le valutazioni vengono attivate dopo la verifica.

    I campi contrassegnati con * sono obbligatori.

    Visto

    Passa subito al negozio appropriato

    Abbiamo stabilito che non sei in Germania e che possiamo offrirti condizioni di spedizione migliori nel nostro negozio per la tua posizione.