Versand  Kostenloser Versand ab 29€ Versand 24h Expressversand Versand Abholung in Berlin möglich Versand Autorisierter Raspberry Pi Reseller
Pimoroni logo

OnOff SHIM für Raspberry Pi

  • 0704256800864
  • Dieser Artikel steht derzeit nicht zur Verfügung!
    Benachrichtigen Sie mich, sobald der Artikel lieferbar ist.
    7,31 €

    inkl. MwSt. zzgl. Versandkosten

    Versandkostenfrei ab 29€
    innerhalb Deutschlands
    Artikel derzeit nicht ab Lager verfügbar
    Der Artikel kann nicht in den Warenkorb gelegt werden, da max. 1 Raspberry Pi Zero pro Kunde erlaubt ist.
    Jetzt Troins sichern
    Add a tiny yet convenient power switch to your Pi with OnOff SHIM! Our SHIMs (Shove... mehr
    Produktinformationen "OnOff SHIM für Raspberry Pi"
    Add a tiny yet convenient power switch to your Pi with OnOff SHIM!

    Our SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 1mm thick (the bare board, not including mounted components) and designed to be soldered straight onto the GPIO pins of your Pi, if you wish, so that you can use them with HATs and pHATs on top.

    Just plug your micro-USB power supply into the micro-B connector on OnOff SHIM, and then press the button once to switch on power and boot up your Pi. After installing our software (details below), you can press the button again to initiate a clean shutdown and completely cut the power to your Pi.

    • super-small SHIM-format board
    • 1mm thick PCB
    • can be used with HATs and pHATs
    • corner-mounted push button for on/off
    • micro-B connector for power supply
    • red status LED
    • optional breakout pins to connect an external momentary button
    • 2x6 female header included
    • supports up to 2.5A power supply
    • software daemon to shutdown cleanly
    • requires soldering


    We've put together a one-line-installer to install the clean shutdown daemon. It watches the state of BCM pin 17 and, when pulled low (pressed), it initiates a clean shutdown. Last thing, just before your Pi shuts down, BCM pin 4 is pulled low to completely cut power to your Pi.

    To install the software, open a terminal and type curl | bash to run the one-line-installer.
    Weiterführende Links zu "OnOff SHIM für Raspberry Pi"
    Daten "OnOff SHIM für Raspberry Pi"
    Gewicht Brutto (in kg): 0.005
    Artikelnummer: 0704256800864
    EAN: 0704256800864
    Hersteller: Pimoroni
    Hersteller Produktnummer: PIM269
    Zolltarifnummer: 84733020
    Herkunftsland: Großbritannien
    Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
    Inhalt 10 Meter (0,08 € / 1 Meter)
    0,77 €
    08 d 09 h 05 min 03 s
    Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
    Inhalt 10 Meter (0,11 € / 1 Meter)
    1,12 €
    08 d 09 h 05 min 03 s
    Zuletzt angesehen