Sensoren

Concise design 5V working voltage Easy to use Low power consumption Grove compatible interface

The Grove - 3-Axis Digital Compass is a digital compass sensor based on Bosch BMM150

Der Grove Formaldehyd-Sensor kann Formaldehyd im Bereich von 0~1000 ppb mit geringer Querempfindlichkeit gegenüber Alkohol und hoher Stabilität von 6 Jahren Lebensdauer nachweisen. Der eingebaute RHT-Sensor sorgt dafür, dass er auch bei unterschiedlichen Temperaturen und Luftfeuchtigkeiten einwandfrei funktioniert. Die Daten werden über UART- und I2C-Ports übertragen.

Der Grove Wasserstandssensor ist ein sehr genauer Sensor, der bei Anwendungen zur Wasserstandserfassung hilfreich sein kann. Er ist vollständig wasserdicht und verwendet kapazitive Pads, um Wasserstände bis zu 10 cm zu erkennen.

The Grove - ±5A DC/AC Current Sensor (ACS70331) is a high precision DC/AC current sensor based on ACS70331. The ACS70331EESATR-005B3 is Allegro?s high sensitivity, current sensor IC for <5 A current sensing applications.

This module is based on the I2C light-to-digital converter TSL2561 to transform light intensity to a digital signal. It has three detection modes to take your readings (infrared mode, full-spectrum, and human visible mode) and can be used to measure the change in light intensity in various light situations with many popular microcontrollers.

Grove - 3-Axis Digital Accelerometer(LIS3DHTR) is a low-cost 3 - Axis accelerometer which is based on the LIS3DHTR chip which provides multiple ranges and interfaces selection.

Preiswerte Lithium-Polymer-Akkus haben die Elektronik revolutioniert - sie sind dünn, sie sind leicht, sie können bis auf 3,3 V heruntergeregelt werden und sie sind einfach aufzuladen. Auf Ihrem Telefon gibt es ein kleines Bild einer Batteriezelle, das Ihnen den Prozentsatz der Ladung anzeigt - so wissen Sie, wann Sie es unbedingt einstecken müssen und wann Sie ungebunden bleiben können. Der Adafruit LC709203F LiPoly / LiIon Fuel Gauge and Battery Monitormacht dasselbe. Schließen Sie ihn an Ihren Lipoly- oder LiIon-Akku an und er zeigt Ihnen die Spannung der Zelle an, er macht die lästige Mathematik der Dekodierung der nicht-linearen Spannung, um Ihnen auch...

The Grove - ADC for Load Cell (HX711) is a 24-bit A/D converter designed specifically for the load cell, it's quite easy to build your Arduino weight sensor system with this module.

Grove - Wärmebildkamera ist ein Wärmesensor, der das MLX90640 IR-Array trägt. Die Kamera kann dynamische Wärmebilder darstellen und die Umgebungstemperatur von -40°~300° erkennen. Die Kamera ist mit einem Weitwinkel ausgestattet und hat ein FOV von 110°x75°.

The Grove 6 ? Axis Accelerometer&Compass v2 has 3 magnetic field channels and 3 acceleration channels, and 16-bit data output

High sensitivity High Precision Non-dispersive infrared Temperature compensation UART output

Grove - ADXL345 is a small, thin, ultra low power 3-axis accelerometer, providing high resolution (13-bit) measurement at up to ±16 g. 

- Hochsensibles, triaxiales, leistungsstarkes Beschleunigungsmodul
- Spezieller Algorithmus von BOSCH für eine genau Schrittzählung
- Plug-and-Play-Lösung mit Wasserzeichen-Funktionalität
- Ideal für Fitness- und Aktivitätsverfolgung
- Effiziente Energieverwaltung für Wearable-Anwendungen

This Grove-Infrared temperature sensor is a non-contact temperature measure model

Provided a high-sensitivity RFR-359F photo-reflector, Grove - IR Distance Interrupter v1

Up to 1ppm high sensibility Built with VOC sensor WSP2110 Covers HCHO, Benzene,Toluene, Alcohol etc Grove connector compatible Easy to use

The tilt-switch twig is the equivalent of a button, and is used as a digital input

PIR sensor is used for making motion detecting applications such as alarm burglar systems, visitor presence monitoring, light switches and robots

The Grove - Light & Color & proximity sensor is TMG39931 based product, which features advanced detection, Proximity detection, Digital Ambient Light Sense(ALS), Color Sense(RGBC), and optical pattern generation/transmission for broadcast. This four-in-one sensor allows you to collect the data from ambient environmet and ntransfers over the I2C bus.

The ADXL335 is a triple axis MEMS accelerometer with a low power consumption of 150 ?A in the measurement mode! This analog accelerometer is a low g accelerometer with a minimum full-scale range of ±3 g.  The ADXL335 can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.

The 80cm Infrared Proximity Sensor is a General Purpose Type Distance Measuring Sensor based on Sharp GP2Y0A21YK, which is a wide-angle distance measuring sensor. This proximity sensor takes a continuous distance reading and returns a corresponding analog voltage with a range of 10cm (4") to 80cm (30").

The Grove - Laser PM2.5 Sensor (HM3301) is a new generation of laser dust detection sensor,  which is used for continuous and real-time detection of dust in the air. With its stable output, low noise, and ultra-low power consumption, it is suitable for air conditioners, intelligent air purifiers, and other air quality-related IoT projects.

Provide reliable data for air purifier system Easy maintenance PWM output Grove compatible interface Compact and light design

A multiple function sensor that can measure temperature, pressure, humidity, and gas at the same time. Based on the BME680 module. It integrates the 4-in-1 function on such a small module and will be very beneficial to apply on GPS devices or IoT projects such as your own Arduino weather station or weather forecast system.

Grove - I2C Thermocouple Amplifier (MCP9600),High Temperature Sensor,Type k thermocouple

Grove - 3-Axis Digital Accelerometer ±16g Ultra-low Power (BMA400)

This Infrared Thermometer module is equipped with a single-point medical-grade infrared temperature sensor (MLX90614), which can detect the temperature of objects with an accuracy of ±0.2°C in the body temperature range. At room temperature, the surface temperature of the measured object can reach an accuracy of ±0.5°C in a wide range. The module can use the I2C protocol to obtain data from the camera. The field of view (FOV) of this sensor is 5°, the temperature measurement range is -70°C?380°C, and the working temperature is that the sensor's Ta value is between -40°~85°.

Thermocouples are very sensitive, requiring a good amplifier with a cold - compensation reference

Grove - 6-Axis Accelerometer&Gyroscope is a cost-effective Grove sensor integrated with a 3-axis digital accelerometer and a 3-axis digital gyroscope

The Grove - 10A DC Current Sensor (ACS725) is a high precision DC current sensor based on ACS725. The Allegro? ACS725 current sensor IC is an economical and precise solution DC current sensing in industrial, automotive, commercial, and communications systems. 

The Grove - 3-Axis Analog Accelerometer ±40g (ADXL356C) is a analog output industrial grade, high stability, high precision and low power ADI ADXL series three-axis accelerometers.

FEATURES? Wide Temperature Detecting Range - 40 to 85°C for sensor temperature - 40 to 115°C for object temperature? High accuracy of 1°C over wide temperature? Measurement resolution of 0

The Grove - 3-Axis Analog Accelerometer ±20g (ADXL356B) is a analog output industrial grade, high stability, high precision and low power ADI ADXL series three-axis accelerometers.

This IR thermal camera carries a 16x12 array of thermal sensors (MLX90641) and it can detect the temperature of objects from far away with a centre area accuracy of ±1? and average accuracy of ±1.5?. In order to obtain the thermal images easily, the I2C protocol is used to get the low-resolution images from the camera. The FOV (Field of View) of this camera is 110°x75°, and the temperature measurement range is -40? to 300?.

This 3-axis accelerometer module is based on MMA7660FC with Digital Output I2C. You can use module in the application of sensing data changes, product orientation, and gesture detection through an interrupt pin (INT)