Aucun résultat trouvé pour le filtre !
Grove - NFC Tag is a highly integrated Near Field Communication Tag module,this module is I2C interface,which base on M24LR64E-R,M24LR64E-R have a 64-bit unique identifier and 64 -Kbit EEPROM
Numéro d'article: SE-101020070
Using RFM95 module based on SX1276 LoRa® Inputting voltage?5V/3.3V ~28mA(Avg) @+20dBm continuous transmit ~8.4mA(Avg)@standby mode ~20mA(Avg) @receive mode, BW-500kHz
Numéro d'article: SE-113060007
This Grove - Blueseeed LE (HM11) utilizes an HM-11 module to provide your Arduino/Seeeduino with serial BLE function, and it can be used with Arduino/Seeeduino very conveniently if using with Base Shield together
Numéro d'article: SE-113020007
Grove - Serial Blueseeed TH (CSR BC417) is an easy to use module compatible with the existing Grove Base Shield, and designed for transparent wireless serial connection setup
Numéro d'article: SE-113020008
7cm sensing distance 125kHz RFID Card Read Only Arduino Library
Numéro d'article: SE-113020002
GROVE compatible interface Uses ASK (Amplitude Shift Keying) Modulation One way communication
Numéro d'article: SE-113060000
Grove - UART WiFi V2 is a WiFi module for Arduino and Seeeduino, this Arduino WiFi module based on ESP8285 - the upgraded version of ESP8266.
Numéro d'article: SE-113020011
Grove - Blueseeed LE - Dual model (HM13) uses CSR dual-mode Bluetooth chip,with the ARM architecture single chip which supports AT instructions
Numéro d'article: SE-113020009
Grove LoRa-E5 embedded with LoRa-E5 STM32WLE5JC, powered by ARM Cortex M4 ultra-low-power MCU core and LoRa SX126x, is an easy-to-use wireless radio module, supporting LoRaWAN protocol on the EU868 & US915 frequency and (G)FSK, BPSK, (G)MSK, LoRa modulations.
Numéro d'article: SE-113020091
Grove-GPS (Air530) is a high-performance, highly integrated multi-mode satellite positioning and navigation module, supporting plenty of location systems, such as GPS/Beidou/Galileo and etc.
Numéro d'article: SE-109020022
Built around PN532 module Contactless communication at 13.56MHz. Support ISO14443 Type A and Type B protocols Support I2C or UART communication protocols Grove connector compatible
Numéro d'article: SE-113020006
Using RFM95 module based on SX1276 LoRa® Inputting voltage: 5V/3.3V ~28mA(Avg) @+20dBm continuous transmit ~8.4mA(Avg)@standby mode ~20mA(Avg) @receive mode, BW-500kHz
Numéro d'article: SE-113060006
The Infrared Emitter is used to transmit infrared signals through an infrared LED, while there is an Infrared receiver to get the signals on the other side
Numéro d'article: SE-101020026
Grove - IR (Infrared) Receiver is used to receive infrared signals and also used for remote control detection. The IR detector has a demodulator inside that looks for modulated IR at 38 kHz. The Infrared Receiver can receive signals well within 10 meters.
Numéro d'article: SE-101020016
Derniers articles consultés
