Für die Filterung wurden keine Ergebnisse gefunden!
Artículo No.: SE-103020007
Artículo No.: SE-101020023
Artículo No.: SE-101020193
Mit dem SparkFun ATECC608A Cryptographic Co-processor Breakout können Sie Ihrem IoT-Knoten, Edge-Device oder Embedded-System starke Sicherheit hinzufügen. Dazu gehören asymmetrische Authentifizierung, symmetrische AES-128-Verschlüsselung/Entschlüsselung und vieles mehr. Wie bereits erwähnt, hat der ATECC608A eine begrenzte Arduino-Unterstützung und das vollständige Datenblatt steht unter NDA mit Microchip.
Artículo No.: DEV-18077
Das Grove Shield für Pi Pico v1.0 ist ein Plug-and-Play-Shield für Raspberry Pi Pico, das verschiedene Arten von Grove-Anschlüssen integriert, darunter 2*I2C, 3*Analog, 2*UART, 3*Digital-Ports, SWD-Debug-Schnittstelle und SPI-Pin, 3,3v/5v wählbarer Stromschalter. Es ermöglicht den Aufbau von Prototypen und Projekten auf einfache und schnelle Weise ohne Jumper-Draht und Breadboard, Sie könnten unendliche Möglichkeiten des Picos erforschen. Das Shield-Board ist eine stapelbare Zusatzplatine, die als Brücke für den Pi Pico und das Grove-System von Seeed dient.
Artículo No.: SE-103100142
Artículo No.: SE-101020063
Artículo No.: SE-101020174
Grove - Sunlight Sensor is a multi-channel digital light sensor, which has the ability to detect UV-light, visible light and infrared light. It offers excellent performance under a wide dynamic range and a variety of light sources including direct sunlight. Suitable for your Raspberry Pi weather station or smart irrigation system using Arduino if you need to monitor the visible spectrum.
Artículo No.: SE-101020089
Artículo No.: SE-101020812
Artículo No.: SE-110990037
Artículo No.: SE-110070024
Artículo No.: SE-101020852
Artículo No.: SE-110070021
Artículo No.: SE-101020052
Artículo No.: SE-104030005
Grove - Air quality sensor v1.3 is designed for indoor air quality testing. It can respond to carbon monoxide, alcohol, acetone, thinner, formaldehyde, and other slightly toxic gases. Compatible with 5V and 3.3V power supply, it can work with Arduino and Raspberry Pi. With its long-term stability & low power consumption, it would be a perfect choice for air quality monitoring.
Artículo No.: SE-101020078
Artículo No.: SE-109020022
Artículo No.: SE-101020015
Artículo No.: SE-113020002
Artículo No.: SE-101020555
The Grove - Light Sensor v1.2 is an analog module and can output various electrical signals which can be converted to different ranges. It integrates LS06-S photoresistor, a high-sensitive and reliable photodiode, to detect the intensity of light in the environment. It is a perfect Arduino light sensor module for light measurement, light detection, and light-controlled switch.
Artículo No.: SE-101020132
Artículo No.: SE-104030009
Artículo No.: SE-110070022
The Grove-VOC and eCO2 Gas Sensor SGP30 is an air quality sensor(Arduino compatible). Based on SGP30, this module provides TVOC(Total Volatile Organic Compounds) and CO2eq output with outstanding long-term stability and low power consumption, which make it a perfect choice for indoor air quality detection.
Artículo No.: SE-101020512
Grove - Rotary Angle Sensor, this potentiometer twig produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use. This may also be known as a rotary angle sensor.
Artículo No.: SE-101020017
Artículo No.: SE-104020249
Artículo No.: SE-113020007
This module is a bi-directional SPSD(single-pole, single-throw), normally open solid state relay(SSR). The Grove Optocoupler Relay (M281) offers very low on-resistance, which allowing a high load current rating.
Unlike the other TRIAC SSR in our website, this relay is based on MOSFET, so it can carry both AC load and DC load. If you need to use a SSR with the DC load, this is what you want!
Unlike the other TRIAC SSR in our website, this relay is based on MOSFET, so it can carry both AC load and DC load. If you need to use a SSR with the DC load, this is what you want!
Artículo No.: SE-101020603
Artículo No.: SE-103020000
Artículo No.: SE-101020232
Artículo No.: SE-104020208
Artículo No.: SE-104030001
Der Grove - SCD30 ist ein 3-in-1 Sensor, der CO2, Temperatur und Feuchtigkeit messen kann. Er basiert auf dem Sensirion SCD30 und ist ein nicht-dispersiver Infrarot(NDIR)-Kohlendioxid-Sensor mit hoher Präzision und großer Messgenauigkeit. Der Sensor ist die perfekte Wahl, für den Bau einer Wetterstation oder anderer Umweltprojekte.
Artículo No.: SE-101020634
Artículo No.: SE-103100124
Artículo No.: SE-101020192
Últimos vistos