This Infrared Thermometer module is equipped with a single-point medical-grade infrared temperature sensor (MLX90614), which can detect the temperature of objects with an accuracy of ±0.2°C in the body temperature range. At room temperature, the surface temperature of the measured object can reach an accuracy of ±0.5°C in a wide range. The module can use the I2C protocol to obtain data from the camera. The field of view (FOV) of this sensor is 5°, the temperature measurement range is -70°C?380°C, and the working temperature is that the sensor's Ta value is between -40°~85°.
Articolo no.: SE-101020894
Das Infrarot-Thermometermodul verfügt über einen Einpunkt-Infrarot-Temperatursensor (MLX90641) in medizinischer Qualität, der die Temperatur von Objekten mit einer Genauigkeit von ±0,2 °C im Bereich der Körpertemperatur erfassen kann. Bei Raumtemperatur kann die Oberflächentemperatur des gemessenen Objekts in einem weiten Bereich eine Genauigkeit von ±0,5 °C erreichen. Das Modul kann das I2C-Protokoll verwenden, um Daten von der Kamera zu erhalten. Das Sichtfeld (FOV) dieses Sensors beträgt 35°, der Temperaturmessbereich liegt bei -70°C-380°C, und die Arbeitstemperatur liegt bei einem Ta-Wert des Sensors zwischen...
Articolo no.: SE-101020895
The infrared thermal imaging module has a 16x4 resolution array temperature sensor (MLX90621), which can detect the temperature of the object with an accuracy of ±1°C ±3% * |To-Ta|, Where To is the measured surface temperature of the object, and Ta is the temperature of the sensor itself. The module can use the I2C protocol to obtain low-resolution images from the camera. The field of view (FOV) of this camera is 120°x25°, the temperature measurement range is -20°C?300°C, and the working temperature is that the sensor's Ta value is between -40°~85°. fdslkjlk fdskl
Articolo no.: SE-101020893
Grove - Analog Microphone is based on high-performance SiSonic MEMS technology, it offers extremely-low-noise, low-current, reliable, and it has improved performance under severe conditions with excellent sensitivity.
Articolo no.: SE-101020852
This IR thermal camera carries a 16x12 array of thermal sensors (MLX90641) and it can detect the temperature of objects from far away with a centre area accuracy of ±1? and average accuracy of ±1.5?. In order to obtain the thermal images easily, the I2C protocol is used to get the low-resolution images from the camera. The FOV (Field of View) of this camera is 110°x75°, and the temperature measurement range is -40? to 300?.
Articolo no.: SE-101020892
Grove - Integrated Pressure Sensor Kit (MPX5700AP) is made for measuring pressure in the range of 15Kpa to 700Kpa, which is perfectly suitable for making your own Arduino air pressure measurement system.
Articolo no.: SE-110020248
Grove - Oxygen Sensor (MIX8410) is an electrochemical oxygen sensor and it can be used to test the oxygen concentration in air. Under the catalysis of the electrodes, a redox reaction occurs on the working electrode and the counter electrode, thereby generating a current. The concentration of oxygen in the air is calculated by measuring this current and referring to the oxygen concentration linear characteristic graph.
Articolo no.: SE-101990680
Grove - Multichannel Gas Sensor V2 provides stable and reliable gases detecting function under the circumstances of any other four sorts of gases. It can detect a variety of gases, besides Carbon monoxide (CO), Nitrogen dioxide (NO2), Ethyl alcohol(C2H5CH), Volatile Organic Compounds (VOC), and etc.
Articolo no.: SE-101020820
The Grove ? Doppler Radar is based on the BGT24LTR11 Silicon Germanium MMIC which is a 24GHz radar transceiver. It is driven by an XMC1302 MCU based on Arm® Cortex®-M0. This comes in a compact package and runs on very low power, providing high-precision measurements of objects' movement and speed.
Articolo no.: SE-109020021
Grove - 3-Axis Digital Accelerometer(LIS3DHTR) is a low-cost 3 - Axis accelerometer which is based on the LIS3DHTR chip which provides multiple ranges and interfaces selection.
Articolo no.: SE-114020121
Der Grove Wasserstandssensor ist ein sehr genauer Sensor, der bei Anwendungen zur Wasserstandserfassung hilfreich sein kann. Er ist vollständig wasserdicht und verwendet kapazitive Pads, um Wasserstände bis zu 10 cm zu erkennen.
Articolo no.: SE-101020635
AHT20 is a new generation of temperature and humidity sensor embedded with a dual-row flat and no-lead SMD package, suitable for the reflow soldering. AHT20 is equipped with a newly designed ASIC chip: an improved MEMS semiconductor capacitive humidity sensor, and a standard on-chip temperature sensor. The output is the I2C protocol with the Grove interface.
Articolo no.: SE-101990644
An Arduino-compatible TDS(Total Dissolved Solids) sensor/meter for measuring TDS levels in water to indicate the water quality. It can be implemented in fields such as homemade water filter, hydroponics, aquarium and others related to testing water quality.
Articolo no.: SE-101020753
Grove - DPS310 is a high precision barometric pressure sensor, it can measure air pressure change caused by height changes in the centimeter level.
Articolo no.: SE-101020812
The Grove - 10A DC Current Sensor (ACS725) is a high precision DC current sensor based on ACS725. The Allegro? ACS725 current sensor IC is an economical and precise solution DC current sensing in industrial, automotive, commercial, and communications systems.
Articolo no.: SE-101020616
Grove - Turbidity Sensor can measure the turbidity of the water.
Articolo no.: SE-101020752
The Grove - Capacitive Fingerprint Scanner is a small size, low power consumption, high-reliability Arduino fingerprint sensor.
Articolo no.: SE-101020713
The Grove - ±5A DC/AC Current Sensor (ACS70331) is a high precision DC/AC current sensor based on ACS70331. The ACS70331EESATR-005B3 is Allegro?s high sensitivity, current sensor IC for <5 A current sensing applications.
Articolo no.: SE-101020615
The Grove - 2.5A DC Current Sensor(ACS70331) can measure the DC current up to 2.5A and has a base sensitivity of 800mV/A.
Articolo no.: SE-101020652
The Grove - ADC for Load Cell (HX711) is a 24-bit A/D converter designed specifically for the load cell, it's quite easy to build your Arduino weight sensor system with this module.
Articolo no.: SE-101020712
The Grove - Light & Color & proximity sensor is TMG39931 based product, which features advanced detection, Proximity detection, Digital Ambient Light Sense(ALS), Color Sense(RGBC), and optical pattern generation/transmission for broadcast. This four-in-one sensor allows you to collect the data from ambient environmet and ntransfers over the I2C bus.
Articolo no.: SE-101020580
The Grove - Laser PM2.5 Sensor (HM3301) is a new generation of laser dust detection sensor, which is used for continuous and real-time detection of dust in the air. With its stable output, low noise, and ultra-low power consumption, it is suitable for air conditioners, intelligent air purifiers, and other air quality-related IoT projects.
Articolo no.: SE-101020613
Provide reliable data for air purifier system Easy maintenance PWM output Grove compatible interface Compact and light design
Articolo no.: SE-101020012
Low power consumption Wide power supply range: DC 3~5V Convenient to use High sensitivity
Articolo no.: SE-101020033
Have you ever been bothered for detecting simple collisions with complex algorithm with an acceleration sensor? The collision sensor is here to simplify the process,
Articolo no.: SE-101020005
The ADXL335 is a triple axis MEMS accelerometer with a low power consumption of 150 ?A in the measurement mode! This analog accelerometer is a low g accelerometer with a minimum full-scale range of ±3 g. The ADXL335 can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
Articolo no.: SE-101020051
Grove - ADXL345 is a small, thin, ultra low power 3-axis accelerometer, providing high resolution (13-bit) measurement at up to ±16 g.
Articolo no.: SE-101020054
Grove - DHT22 ist ein hochpräziser Temperatur- und Feuchtigkeitssensor, der auf dem DHT22-Modul (auch bekannt als AM2302 oder RHT03) basiert. Durch die hohe Leistung und die hohe Präzision ist er ideal für die Temperatur- und Luftfeuchtigkeitsüberwachung mit Arduino und Raspberry Pi. Der Sensor kann auch als Thermometer und Hygrometer verwendet werden.
Articolo no.: SE-101020019
Concise design 5V working voltage Easy to use Low power consumption Grove compatible interface
Articolo no.: SE-101020018
The Grove - Single Axis Analog Accelerometer ±100g (ADXL1001) is a ultralow noise, high frequency, high G MEMS accelerometers
Articolo no.: SE-101020633
The Grove - 3-Axis Analog Accelerometer ±40g (ADXL356C) is a analog output industrial grade, high stability, high precision and low power ADI ADXL series three-axis accelerometers.
Articolo no.: SE-101020638
Measuring both temperature and humidity Supports 3.3V and 5V dual working voltage Low power consumption High reliability and stability I2C Grove compatible interface
Articolo no.: SE-101020074
The Hall Sensor measures the Hall Effect, which is a production of a voltage difference across an electrical conductor, transverse to an electric current in the conductor as well as a magnetic field perpendicular to the current
Articolo no.: SE-101020046
How to choose a gas sensor ? Alcohol sensor is semiconductor sensor for alcohol detection
Articolo no.: SE-101020044
Grove - 3-axis Gyro module based on ITG 3200
Articolo no.: SE-101020050
An Arduino sound sensor based on the power amplifier LM358 and the electret microphone. It can be used to detect whether there's sound (like the sound of clapping, noise, etc) surround or not and output the sound strength of the environment. This sound module provides analog output signal.
Articolo no.: SE-101020023