1.54" 200×200 ePaper Display Modul mit SPI Interface

  • EINKM-154
  • Questo prodotto non è attualmente disponibile.
    Informatemi non appena il prodotto è nuovamente disponibile.
    11,90 € *

    IVA inclusa più spese di spedizione

    L'article ne peut pas être placé dans le panier, car max. 1 Raspberry Pi par client est autorisé.
    Übersicht This is an E-Ink display module, 1.54inch, 200x200 resolution, with... altro
    "1.54" 200×200 ePaper Display Modul mit SPI Interface"
    Übersicht

    This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

    Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


    Eigenschaften
    • No backlight, keeps displaying last content for a long time even when power down
    • Ultra low power consumption, basically power is only required for refreshing
    • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

    Spezifikationen
    • Operating voltage: 3.3V
    • Interface: 3-wire SPI, 4-wire SPI
    • Outline dimension: 48mm × 33mm
    • Display size: 27.6mm × 27.6mm
    • Dot pitch: 0.138 × 0.138
    • Resolution: 200 × 200
    • Display color: black, white
    • Grey level: 2
    • Partial refresh time: 0.3s
    • Full refresh time: 2s
    • Refresh power: 26.4mW(typ.)
    • Standby power: <0.017mW
    • Viewing angle: >170°

      Interface

      SYMBOL DESCRIPTION
      VCC 3.3V
      GND Ground
      DIN SPI MOSI pin
      CLK SPI SCK pin
      CS SPI chip selection, low active
      DC Data/Command selection (high for data, low for command)
      RST External reset, low active
      BUSY Busy status output, low active


      Lieferumfang
      • 1.54inch e-Paper Module
      • Cable XH2.54 20cm 8Pin

      Dokumentation / Downloads
      Link correlati a "1.54" 200×200 ePaper Display Modul mit SPI Interface"
      Dati "1.54" 200×200 ePaper Display Modul mit SPI Interface"
      Codice articolo: EINKM-154
      Peso lordo (in kg): 0.025
      Fabbricante: Waveshare
      Numero del produttore: 1.54inch e-Paper Module
      Numero della tariffa doganale: 85285900
      Paese d'origine: China
      Leggere, scrivere e discutere recensioni... altro
      Valutazione cliente per "1.54" 200×200 ePaper Display Modul mit SPI Interface"
      5 07/lug/2022

      __TS_HEADLINE__

      5 16/mar/2021

      __TS_HEADLINE__

      Schöne Anzeige für mein Smarthome. Läuft auch mit partiellen Refresh der Anzeigedaten.

      5.00
      Scrivi una valutazione
      Le valutazioni vengono attivate dopo la verifica.

      I campi contrassegnati con * sono obbligatori.

      Kupferlitze isoliert, 1x0,14mm, 10m Kupferlitze isoliert, 1x0,14mm, 10m
      Contenuto 10 Meter (0,13 € * / 1 Meter)
      1,31 € *
      Kupferschaltdraht, isoliert, ø0,5mm, 10m Kupferschaltdraht, isoliert, ø0,5mm, 10m
      Contenuto 10 Meter (0,19 € * / 1 Meter)
      1,90 € *
      Visto

      Passa subito al negozio appropriato

      Abbiamo stabilito che non sei in Germania e che possiamo offrirti condizioni di spedizione migliori nel nostro negozio per la tua posizione.