Waveshare è un'azienda cinese che si è impegnata a offrire moduli e strumenti di sviluppo il più economici possibile. In questo modo, sviluppatori e utenti dovrebbero anche poter godere dei prodotti finiti o semilavorati. Naviga in quest'area del nostro sito per trovare tutti i progetti entusiasmanti di cui non sapevi nemmeno.
Waveshare
Nessun risultato trovato per il filtro!
1.44" LCD Display HAT für Raspberry Pi
Übersicht Mit diesem kleinen LCD HAT kann ein Raspberry Pi um ein 1,44" SPI Display, 4-Wege Joystick und 3 Taster erweitert werden Eigenschaften Kompatibel mit allen Raspberry Pi Modellen mit 40-Pin GPIO Schnittstelle Durch pHAT...
11,50 € *
Universal High Resolution 10,1 Display mit HDMI...
Eigenschaften Universelles 10.1 High Resolution Display bestehend aus einer 10.1 Displayeinheit und einem Ansteuerungsboard kompatibel mit allen Raspberry Pi Modellen (A, A+, B, B+, 3 / 2 Modell B), Banana Pi, Banana Pro, Beaglebone...
99,90 € *
Kamera für Raspberry Pi mit einstellbarem Fokus
Eigenschaften Raspberry Pi Kamera, vollständig kompatibel mit originalem Modul kompatibel mit allen Raspberry Pi Modellen (A, A+, B, B+, 2 Modell B) 5 Megapixel OV5647 Sensor mit einem Objektiv mit einstellbarem Fokus Spezifikationen CCD...
12,90 € *
Universal 7,0 Display mit HDMI Eingang und...
Eigenschaften Universelles 7 High Resolution Display mit HDMI Eingang und kapazitivem Touchscreen kompatibel mit allen Raspberry Pi Modellen (A, A+, B, B+, 2 Modell B), Banana Pi, Banana Pro, Beaglebone Black oder anderen...
44,90 € *
NoIR Kamera für Raspberry Pi mit Fisheye-Lens,...
Eigenschaften Raspberry Pi Nachtsicht Kamera, vollständig kompatibel mit originalem Modul kompatibel mit allen Raspberry Pi Modellen (A, A+, B, B+, 2 Modell B) 5 Megapixel OV5647 Sensor mit einem Objektiv mit einstellbarem Fokus...
23,90 € *
3 Kanal Relais HAT für Raspberry Pi
Übersicht The RPi Relay Board gives your Pi the ability to control high voltage/high current devices, easily makes normal home appliances become intelligent. Eigenschaften Supports Raspberry Pi A+/B+/2B/3B High quality relays, loads up...
15,90 € *
0.95" 96x64 OLED Display Modul, RGB, SPI...
0.95" RGB OLED Display mit SPI Interface. Bitte beachten Sie, dass dieses Modul in 2 verschiedenen Konfigurationen erhältlich ist, welche sich in der Anordnung der Stiftleiste unterscheiden. Dieses Modell hat eine vertikale Stiftleiste....
11,20 € *
8 Ohm 5W Lautsprecher passend für Waveshare...
Impendanz: 8Ω Leistung: 5W Abmessungen: 100 x 45 x 21 mm passend für Waveshare Displays mit Artikelnummern: 125165 125170 125172
4,90 € *
5.83" 600×448 ePaper Display HAT für Raspberry Pi
Übersicht This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, great effect...
59,50 € *
0.91" 128x32 OLED Display Modul, einfarbig...
Übersicht This is a general OLED display Module, 0.91inch diagonal, 128x32 pixels, with embedded controller, communicating via I2C interface. Eigenschaften - 0.91inch small form factor - 128x32 high resolution - 16-bit grey level, better...
6,10 € *
Breakout Board für micro:bit
Übersicht Dies ist ein Erweiterungsboard für micro:bit, die die I/O-Pins auf Stiftleisten im Raster 2,54 mm aufbricht, um eine einfache Verwendung zu ermöglichen. Spezifikationen Abmessung: 82,05mm x 36,10mm Durchgangslöcher Durchmesser:...
9,90 € *
Universal 5,0" Display mit HDMI / VGA Eingang...
Eigenschaften 5" Display mit 800x480 Hardware-Auflösung, softwareseitig skalierbar bis 1920x1080 Resistiver Touchscreen Bild über HDMI, Touch und Stromversorgung über Micro USB kompatibel mit allen Raspberry Pi Modellen, Banana Pi,...
44,90 € *
Universal 7,0" IPS Display mit HDMI / VGA...
Eigenschaften 7" IPS Display mit 1024x600 Hardware-Auflösung, softwareseitig skalierbar bis 1920x1080 Kapazitiver Touchscreen Bild über HDMI, Touch und Stromversorgung über Micro USB kompatibel mit allen Raspberry Pi Modellen, Banana Pi,...
59,90 € *
0.96" 128x64 OLED Display Modul, zweifarbig...
0.96" OLED Display mit SPI / I2c Interface. Bitte beachten Sie, dass dieses Modul in 2 verschiedenen Konfigurationen erhältlich ist, welche sich in der Anordnung der Stiftleiste unterscheiden. Dieses Modell hat eine vertikale...
7,80 € *
1.3" 128x64 OLED Display Modul, einfarbig...
1.3" OLED Display mit SPI / I2C Interface. Bitte beachten Sie, dass dieses Modul in 2 verschiedenen Konfigurationen erhältlich ist, welche sich in der Anordnung der Stiftleiste unterscheiden. Dieses Modell hat eine vertikale Stiftleiste....
11,20 € *
1.5" 128x128 OLED Display Modul, einfarbig...
Übersicht Dies ist ein allgemeines OLED-Display-Modul, 1,5 Zoll Diagonale, 128x128 Pixel, 16-Bit-Graustufe, mit eingebettetem Controller, der über SPI oder I2C-Schnittstelle kommuniziert. Eigenschaften - 128x128 hohe Auflösung - 16-bit...
12,90 € *
0.95" 96x64 OLED Display Modul, RGB, SPI...
0.95" RGB OLED Display mit SPI Interface. Bitte beachten Sie, dass dieses Modul in 2 verschiedenen Konfigurationen erhältlich ist, welche sich in der Anordnung der Stiftleiste unterscheiden. Dieses Modell hat eine horizontale...
11,20 € *
7,0" Display für Raspberry Pi mit resistivem...
Eigenschaften 1024x600 Auflösung Resistiver Touchscreen Direkt aufsteckbar auf alle Raspberry Pi Modelle (außer Raspberry 1 oder Raspberry Pi Zero/Zero W, diese erfordern ein zusätzliches HDMI Kabel) Touchscreen und Stromversorgung über...
69,90 € *
Lautsprecher Modul für micro:bit
Übersicht Lautsprecher-Erweiterungsmodul für micro:bit, macht Ihr micro:bit zu einem einfachen Musik-Player. Außerdem kann es auch für die Arduino-Entwicklung verwendet werden, kompatibel mit 3,3V/5V Arduino-Boards. Eigenschaften...
12,50 € *
Universal 5,0 Display mit HDMI / VGA Eingang...
Eigenschaften 5" Display mit 800x480 Hardware-Auflösung, softwareseitig skalierbar bis 1920x1080 Kapazitiver Touchscreen Bild über HDMI, Touch und Stromversorgung über Micro USB kompatibel mit allen Raspberry Pi Modellen, Banana Pi,...
48,90 € *
1.3" 128x64 OLED Display Modul, einfarbig...
1.3" OLED Display mit SPI / I2C Interface. Bitte beachten Sie, dass dieses Modul in 2 verschiedenen Konfigurationen erhältlich ist, welche sich in der Anordnung der Stiftleiste unterscheiden. Dieses Modell hat eine horizontale...
7,40 € *
1.5" 128x128 OLED Display Modul, RGB, SPI...
Übersicht This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface. Eigenschaften 128x128 high resolution, 65K colors, clearly...
18,90 € *
RS485 CAN HAT für Raspberry Pi
The RS485 CAN HAT will enables your Pi to communicate with other devices stably in long-distance via RS485/CAN functions. Eigenschaften Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ CAN function,...
16,60 € *
Game HAT für Raspberry Pi
Mit diesem Game HAT kann ein Raspberry Pi innerhalb von wenigen Minuten in eine mobile Spielekonsole verwandelt werden. Eigenschaften 3.5" IPS Display, 480×320 Auflösung 60 Frames/s für ruckelfreie Bildwiedergabe Kompatibel mit Raspberry...
44,50 € *
5.83" 600×448 ePaper Display HAT für Raspberry...
Overview This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low...
59,90 € *
Mobile Stromversorgung / Li-Ion Akku HAT für...
Overview The Li-ion Battery HAT integrates SW6106 power bank management chip, allows providing 5V regulated power supply to your Pi from a 14500 battery, makes the Pi becomes a portable device. It will charge the battery as well,...
22,60 € *
2.13" 212×104 ePaper Display HAT flexibel für...
Flexibles E-Ink Display HAT für Raspberry Pi, 2.13 Zoll Dieses flexible E-Ink Display HAT für Raspberry Pi mit einer Auflösung von 212x104, SPI-Schnittstelle und Teilaktualisierungsfähigkeit vereint ultra niedrigen Stromverbrauch, weiten...
20,80 € *
8 Kanal Hutschienen Relaismodul für Raspberry Pi
The RPi Relay Board (B) is an expansion board with 8-ch relays for Raspberry Pi. It gives your Pi the ability to control high voltage products such as home appliances. Eigenschaften Supports Raspberry Pi A+/B+/2B/3B/3B+ High quality...
26,30 € *
9.7" 1200x825 ePaper Display HAT für Raspberry Pi
Übersicht This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface. Due to the advantages like ultra low power consumption, wide viewing...
189,90 € *
3,5" IPS Display für Raspberry Pi mit...
Eigenschaften 320x480 Auflösung Resistiver Touchscreen Display mit IPS Technologie Direkt aufsteckbar auf alle Raspberry Pi Modelle Bild, Touchscreen und Stromversorgung über GPIO Unterstützte Betriebssysteme: Raspbian, Ubuntu, etc....
21,90 € *
16 Kanal Servo Driver uHAT (I2C) für Raspberry Pi
Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to control a robotic arm or a hexapod walker by using the Pi, but finally get frustrated due...
12,70 € *
Motor Driver uHAT (I2C) für Raspberry Pi
The Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. It's an ideal choice for you to DIY mobile robots. Eigenschaften Raspberry Pi connectivity, compatible with...
22,90 € *
USB 2.0 Kameramodul 2 Megapixel OV2710 Sensor...
Eigenschaften 2 megapixel OV2710 sensor 1920x1080 resolution USB interface, UVC protocol, driver-free, plug-and-play DSP Automatic white balance (AWB) Automatic exposure (AEC) Automatic gain control (AGC) Camera specifications CCD size:...
33,40 € *
Serial Expansion HAT für Raspberry Pi, 2-ch...
Es gibt nur einen 1-Kanal-UART-Anschluss am originalen Raspberry Pi. Sobald dieser für das Terminal-Debugging verwendet wird, ist kein anderes serielles Gerät mehr erlaubt. Was für eine schlechte Situation. Jetzt haben Sie 2-Kanal extra...
11,50 € *
WM8960 Hi-Fi Stereo Sound HAT für Raspberry Pi
Übersicht Das WM8960 Hi-Fi Stereo Sound HAT ist eine Soundkarte für den Raspberry Pi. Es hat einen niedrigen Stromverbrauch, unterstützt Stereo-Codierung / Dekodierung, verfügt über Hi-Fi-Wiedergabe / Aufnahme und kann Lautsprecher...
15,90 € *
USB 2.0 HD Kameramodul 8 Megapixel IMX179...
Eigenschaften 8 megapixel IMX179 sensor 3288x2512 resolution USB interface, UVC protocol, driver-free, plug-and-play DSP Automatic white balance (AWB) Automatic exposure (AEC) Automatic gain control (AGC) Camera specifications CCD size:...
59,40 € *
Visto