Waveshare è un'azienda cinese che si è impegnata a offrire moduli e strumenti di sviluppo il più economici possibile. In questo modo, sviluppatori e utenti dovrebbero anche poter godere dei prodotti finiti o semilavorati. Naviga in quest'area del nostro sito per trovare tutti i progetti entusiasmanti di cui non sapevi nemmeno.
Waveshare
Nessun risultato trovato per il filtro!
NB-IoT / eMTC / EDGE / GPRS / GNSS HAT für...
Overview This Raspberry Pi HAT features multi communication functionalities: NB-IoT, eMTC, EDGE, GPRS, and GNSS. The NB-IoT (NarrowBand-Internet of Things) and eMTC (enhanced Machine Type Communication) are rising IoT communication...
30,90 € *
4G / 3G / 2G / GSM / GPRS / GNSS HAT für...
Overview The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. You can connect this 4G module with computer to...
64,90 € *
NB-IoT HAT für Raspberry Pi, EU Version
Overview This is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like LWM2M/COAP/MQTT, etc. Due to the advantages of low delay, low power, low cost, and...
19,90 € *
Universal 5,5" AMOLED Display mit HDMI und...
Dieses 5,5" AMOLED-Display bietet im Vergleich zu LCDs die Vorteile eines hohen Kontrasts, eines breiten Farbspektrums und eines großen Betrachtungswinkels, die es in die Lage versetzen, ein lebendiges und feines visuelles Erlebnis zu...
99,90 € *
2-DOF Pan-Tilt HAT für Raspberry Pi
Übersicht This is a 2-DOF pan-tilt kit designed for Raspberry Pi. With onboard PCA9685 PWM chip and TSL2581 ambient light sensor, it allows the Pi to control camera movement and sense light intensity through I2C interface. Eigenschaften...
18,50 € *
Berührungsloser Infrarot-Temperatursensor
Overview Measures the surface temperature of an object without touching it, depending on the emitted IR waves of the target Also measures the average temperature over an area Contact-less, high precision, high resolution, fast response...
15,50 € *
Konverter, USB Typ A Stecker - UART, FT232
Features Original FT232RL onboard Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10... 3 power mode : 5V output, 3.3V output, or powered by target board (3.3V-5V) 3 LEDs: TXD LED, RXD LED, POWER LED Functional Pins TXD, RXD, RTS#,...
6,90 € *
Konverter, micro USB Buchse - UART, CP2102
Overview The CP2102 USB UART Board (micro) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard. CP2102 features: Single-Chip USB to UART Data Transfer No external resistors required, no external crystal...
5,50 € *
Konverter, USB Typ A Stecker - UART, CP2102
Overview The CP2102 USB UART Board (micro) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard. CP2102 features: Single-Chip USB to UART Data Transfer No external resistors required, no external crystal...
6,40 € *
Konverter, USB Typ A Stecker - UART, PL2303
Features PL2303TA onboard (the latest device, compatible with PL2303HXA) Supports windows XP/7/8/8.1/10/... 3 power mode : 5V output, 3.3V output, or powered by target board (3.3V-5V) 3 LEDs: TXD LED, RXD LED, POWER LED How to Use In the...
3,90 € *
Konverter, micro USB Buchse - UART, PL2303
Features PL2303TA onboard (the latest device, compatible with PL2303HXA) Supports windows XP/7/8/8.1/10/... 3 power mode : 5V output, 3.3V output, or powered by target board (3.3V-5V) 3 LEDs: TXD LED, RXD LED, POWER LED How to Use In the...
3,90 € *
Konverter, micro USB Buchse - UART, FT232
Features Original FT232RL onboard Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10... 3 power mode : 5V output, 3.3V output, or powered by target board (3.3V-5V) 3 LEDs: TXD LED, RXD LED, POWER LED Functional Pins TXD, RXD, RTS#,...
8,40 € *
Kapazitiver Fingerabdruckleser mit UART & USB...
Overview The Capacitive Fingerprint Reader is a standard fingerprinting module designed for secondary development, allows fast and stable fingerprint verification. Based on a high-speed digital processor STM32F105R8, combined with...
43,90 € *
L76X Multi-GNSS / GPS / BDS / QZSS HAT für...
Overview This is a Raspberry Pi GNSS HAT which supports Multi-GNSS systems: GPS, BDS, and QZSS, with advantages such as fast positioning, high accuracy, low power consumption, and so on. It is an easy way to enable global positioning...
22,90 € *
MCP23017 IO Expansion Board
Overview The MCP23017 IO Expansion Board expands 2 signal pins as 16 I/O pins based on the I2C bus, up to 8 MCP23017 IO Expansion Board can be used at the same time, providing up to 128 I/O pins, it is compatible with both 3.3V and 5V...
14,80 € *
4-DOF Metall Roboter Arm Kit für Raspberry Pi
Übersicht Statten Sie Ihren Raspberry Pi mit diesem 4-DOF-Metall-Roboterarm aus und beginnen Sie, die Welt der künstlichen intelligenten Robotik zu erkunden. Dieses Starter-Roboterarm-Kit enthält: Servo-Treiber HAT, mechanische...
52,90 € *
Solar Power Management Modul für 6V~24V Solar...
Übersicht Dieses Solar-Power-Management-Modul ist für 6V~24V-Solarmodule ausgelegt. Es kann einen 3,7V Li-Akku über das Solarpanel oder den USB-Anschluss laden und liefert einen geregelten Ausgang von 5 V/1 A. Das Modul verfügt über eine...
7,90 € *
Solar Panel, 6V / 5W, mit 3,5x1,35mm Hohlstecker
Technische Daten Typ der Solarzelle: 156 monokristalline Zelle Oberfläche: gehärtetes Glas Rahmenmaterial: Aluminiumlegierung mit anodischer Oxidation Material der Rückwand: 0,25 mm PET Leistung: 5,0 W ± 5%. Betriebsspannung: 6,0V ± 5%....
10,90 € *
1.3" 240x240 IPS HD LCD Display Modul, SPI...
Übersicht Dies ist ein allgemeines LCD-Display-Modul, IPS-Bildschirm, 1,3 Zoll Diagonale, 240x240 HD-Auflösung, mit integriertem Controller, der über die SPI-Schnittstelle kommuniziert. Features SPI-Schnittstelle, erfordert ein Minimum...
7,90 € *
0.96" 160x80 IPS HD LCD Display Modul, SPI...
Overview This is a general LCD display Module, IPS screen, 0.96inch diagonal, 160x80 HD resolution, with embedded controller, communicating via SPI interface. Features SPI interface, requires minimum GPIO for controlling Comes with...
5,90 € *
Ethernet / USB HUB HAT für Raspberry Pi Zero,...
Übersicht Dieser Raspberry Pi-Hub HAT bietet mehr USB-Fähigkeit für Ihren Pi und einen RJ45-Ethernet-Anschluss, was ideal ist, wenn Sie eine stabile drahtgebundene Ethernet-Verbindung benötigen. Es kann mit verschiedenen Versionen des Pi...
12,50 € *
Laser Sensor mit digitalem Ausgang
Overview Features boost circuit Signal output indicator Specifications Effective distance: 0.8m(typ), 1.5m(max) Power: 2.5V ~ 5.0V Dimension: 47.7mm * 17.9mm Mounting holes size: 2.0mm Applications Obstacle detection Pipeline counter...
12,85 € *
SALE
Barcode Scanner Modul, liest 1D / 2D Codes,...
Übersicht Dies ist ein kleiner 1D/2D-Codeleser, der mit Hilfe des intelligenten Bilderkennungsalgorithmus den Barcode oder 2D-Code auf Papier oder Bildschirm schnell und präzise entschlüsselt. Über die integrierte USB- und...
31,90 € * 38,60 € *
SX1262 LoRa HAT für Raspberry Pi, 868 MHz...
Übersicht Dieses LoRa HAT, passend für den Raspberry Pi basiert auf dem SX1262 und deckt das 868MHz Frequenzband ab. Es ermöglicht eine Datenübertragung bis zu 5 km über die serielle Schnittstelle. Durch die Verwendung der neuen...
24,90 € *
SX1268 LoRa HAT für Raspberry Pi, 433 MHz...
Übersicht Dieses LoRa HAT, passend für den Raspberry Pi basiert auf dem SX1268 und deckt das 433MHz Frequenzband ab. Es ermöglicht eine Datenübertragung bis zu 5 km über die serielle Schnittstelle. Durch die Verwendung der neuen...
21,90 € *
Waveshare Sense HAT für Raspberry Pi
Overview Dieses Sense HAT ist speziell für den Raspberry Pi entwickelt worden. Es integriert leistungsstarke Sensoren wie Gyroskop, Beschleunigungssensor, Magnetometer, Barometer, Temperatur- und Feuchtigkeitssensor, etc. Das HAT...
22,90 € *
Lüfter 40x40x20mm, PWM regelbar, für NVIDIA...
PWM regelbarer Lüfter passend für NVIDIA Jetson Nano. Übersicht Anschluss: 4PIN verpolungssicherer Stecker Spannung: 5V, PWM regelbar Abmessungen: 40 x 40 × 20 mm Lieferung inkl. 4 Schrauben
3,30 € *
7.8" 1872x1404 ePaper Display HAT für Raspberry Pi
Übersicht E-Ink-Display HAT für Raspberry Pi, 7,8 Zoll, Auflösung 1872×1404, mit integriertem Controller IT8951, Kommunikation über USB/SPI/I80/I2C-Schnittstelle, unterstützt partielle Aktualisierung. Merkmale Keine...
139,90 € *
GamePi20 für Raspberry Pi Zero
Übersicht Der GamePi20 ist eine Mini-Retro-Videospielkonsole auf Basis vom Raspberry Pi Zero 1.3/Zero W/Zero WH. Merkmale Kompatibel mit Raspberry Pi Zero 1.3 / Zero W / Zero WH 2,0-Zoll-IPS-Display, 320x240 Pixel Integrierte...
29,90 € *
7.8" 1872x1404 ePaper Display
Übersicht E-Ink-Display, 7,8 Zoll, Auflösung 1872×1404, mit integriertem Controller IT8951, Kommunikation über parallele Schnittstelle, unterstützt partielle Aktualisierung. Merkmale Keine Hintergrundbeleuchtung, zeigt die letzten...
105,50 € *
128×32, 2.23inch OLED Display HAT für Raspberry Pi
Übersicht Dieses OLED-Display HAT für den Raspberry Pi, hat eine Diagonale von 2,23", 128×32 Pixel Auflösung und kommuniziert mittels dem mit eingebettetem SSD1305 Treiber über SPI oder I2C Schnittstelle. Merkmale Standard Raspberry Pi...
16,90 € *
2.9" 296×128 ePaper Display HAT flexibel für...
Übersicht Dies ist ein flexibles E-Ink-Display HAT für Raspberry Pi, 2,9" , 296×128 Auflösung, mit integriertem Controller, Kommunikation über SPI-Schnittstelle, unterstützt partielle Aktualisierung. Im Vergleich zu normalen...
20,90 € *
Kapazitiver Fingerabdruckleser, rund, zum...
Übersicht Dies ist ein hochintegriertes, rund geformtes, kapazitives All-in-One-Fingerabdrucksensormodul, das fast so klein ist wie ein Nagel. Das Modul wird über UART-Befehle gesteuert und ist relativ einfach zu bedienen. Zu seinen...
19,90 € *
Lüfter 40x40x10mm, für NVIDIA Jetson Nano
Lüfter passend für NVIDIA Jetson Nano. Übersicht Anschluss: 3PIN verpolungssicherer Stecker Spannung: 5V Abmessungen: 40 x 40 × 10 mm Lieferung inkl. 4 Schrauben
1,60 € *
GamePi43 für Raspberry Pi
Übersicht Mit dem GamePi43 Kit, verwandeln Sie den Raspberry Pi in eine tragbare Retro-Videospielkonsole Merkmale 4,3-Zoll-IPS-Display, 800×480 Pixel 60fps für ruckelfreies Spiel-Erlebnis Kompatibel mit Raspberry Pi B+/2B/3B/3B+/4...
79,90 € *
13,3" Magic Mirror Display inkl. Raspberry Pi 3 A+
Dieser 13,3 Zoll Magic Mirror mit einer Auflösung von 1920 x 1080 verfügt über einen eingebauten Raspberry Pi A+ und kann über einen Sprachassistenten gesteuert werden, oder mit Tastatur und Maus als voll funktionsfähiger...
229,90 € *
Visto