Create review

Day of the Geek Badge, Löt-Kit, weiß

Name: Day of the Geek Badge, Löt-Kit, weiß
Brand: SparkFun
SKU: KIT-20119
Price: 9.5 EUR
Availability: LimitedAvailability

Product number: KIT-20119

€9.50

Order now and
secure 5 Berrys

Prices incl. VAT plus shipping costs

Varianten

Day of the Geek Badge, Löt-Kit, schwarz

Available · 10 piece · 1-3 days

Check quantity

Available immediately

10 piece : 1-3 days

4.96/5 customer reviews for BerryBase

Free shipping from 79€*

Support

Wird oft zusammengekauft

Product information "Day of the Geek Badge, Löt-Kit, weiß"

Der Tag der Toten findet nur einmal im Jahr statt, aber was wäre, wenn du ihn an jedem beliebigen Tag feiern könntest? Mit dieser weißen Version des Day of the Geek Lötbausatzes kannst du die Grundlagen des Lötens erlernen, indem du ein leuchtendes Schädelabzeichen zusammenbaust! Jedes Day of the Geek-Kit braucht etwa 5-10 Minuten, um es mit einfachen Lötmaterialien (nicht im Lieferumfang enthalten) zusammenzubauen. Sag nein zu Zuckerschädeln und sag stattdessen ja zu Lötschädeln!

Jedes Day of the Geek Soldering Badge Kit enthält eine weißé Schädelplatine, einen CR2032-Batteriehalter, einen Pin-Back und drei Paar farbige LEDs, damit du die Wahl zwischen roten, weißen oder blauen Augen hast. Alles, was du (neben einem Lötkolben und Lötzinn) brauchst, ist eine CR2032 Knopfzellenbatterie, denn die ist nicht enthalten, um den Versand zu erleichtern. Wegen der unterschiedlichen Vorwärtsspannungen und Stromaufnahme solltest du die LED-Farben nicht mischen. Verwende nur rot mit rot, weiß mit weiß und blau mit blau.

Einen fröhlichen Dia de los Muertos euch allen!

Hinweis: Da es sich bei diesem Produkt um einen Bausatz handelt, sind Montage und Grundkenntnisse im Löten erforderlich. Das Day of the Geek Badge wird nicht vormontiert geliefert.

Bestandteil:

1x Weiße Totenkopf-Platine
2x Rote LEDs
2x Blaue LEDs
2x weiße LEDs
1x CR2032 Batteriehalter
1x Pin hinten

Dokumente:

Assembly Guide

Zolltarifnummer:	85340000
Brand:	SparkFun
Country of Origin:	USA
Gross Weight (kg):	0.013
Manufacturer ID:	KIT-20119
Product ID:	KIT-20119

Hersteller-Informationen
SparkFun Electronics
6333 Dry Creek Parkway
DE CO 80503 Niwot
https://www.sparkfun.com
[email protected]

WEEE-Nummer: 17968585

Verantwortliche Person für die EU
Sertronics GmbH
Am Studio 20d
DE 12489 Berlin
https://www.berrybase.de
[email protected]

Sicherheitshinweise

Vor dem Zusammenbau sicherstellen, dass alle Komponenten und Werkzeuge vollständig und unbeschädigt sind.
Produkt nur gemäß Anleitung verwenden und installieren, um Verletzungsrisiken zu vermeiden.
Schutzhandschuhe und Sicherheitsbrille während des Zusammenbaus tragen, um Verletzungen zu vermeiden.
Kinder von Kleinteilen fernhalten, Erstickungsgefahr.
Elektrische Komponenten niemals im nassen Zustand verwenden, um Kurzschlüsse und Stromschläge zu vermeiden.
Nicht für den Einsatz in explosionsgefährdeten Umgebungen geeignet.
Bei Fehlfunktionen sofort von der Stromquelle trennen und das Gerät nicht weiter verwenden.
Entsorgung gemäß den lokalen Vorschriften für Elektronikkomponenten und Batterien durchführen.
Keine Bauteile in den normalen Hausmüll werfen, sondern geeignete Recyclingstellen nutzen.
Akkus oder Batterien vor der Entsorgung aus dem Produkt entfernen und gesondert entsorgen.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Ähnliche Artikel

Day of the Geek Badge, Löt-Kit, schwarz

Der Tag der Toten findet nur einmal im Jahr statt, aber was wäre, wenn du ihn an jedem beliebigen Tag feiern könntest? Mit dieser schwarzen Version des Day of the Geek Lötbausatzes kannst du die Grundlagen des Lötens erlernen, indem du ein leuchtendes Schädelabzeichen zusammenbaust! Jedes Day of the Geek-Kit braucht etwa 5-10 Minuten, um es mit einfachen Lötmaterialien (nicht im Lieferumfang enthalten) zusammenzubauen. Sag nein zu Zuckerschädeln und sag stattdessen ja zu Lötschädeln! Jedes Day of the Geek Soldering Badge Kit enthält eine schwarze Schädelplatine, einen CR2032-Batteriehalter, einen Pin-Back und drei Paar farbige LEDs, damit du die Wahl zwischen roten, weißen oder blauen Augen hast. Alles, was du (neben einem Lötkolben und Lötzinn) brauchst, ist eine CR2032 Knopfzellenbatterie, denn die ist nicht enthalten, um den Versand zu erleichtern. Wegen der unterschiedlichen Vorwärtsspannungen und Stromaufnahme solltest du die LED-Farben nicht mischen. Verwende nur rot mit rot, weiß mit weiß und blau mit blau. Einen fröhlichen Dia de los Muertos euch allen! Hinweis: Da es sich bei diesem Produkt um einen Bausatz handelt, sind Montage und Grundkenntnisse im Löten erforderlich. Das Day of the Geek Badge wird nicht vormontiert geliefert. Bestandteil: 1x Schwarze Totenkopf-Platine 2x Rote LEDs 2x Blaue LEDs 2x weiße LEDs 1x CR2032 Batteriehalter 1x Pin hinten Dokumente: Assembly Guide

€9.50

Available · 2 piece · 1-3 days

Day of the Geek Badge, Löt-Kit, schwarz

KIT-20118

€9.50

Available · 2 piece · 1-3 days

Prices incl. VAT plus shipping costs

Cutsomers also bought

SparkFun Leuchtturm, Lötset für Anfänger

Eine ruhige See hat noch keinen geschickten Seemann gemacht, also fange mit diesem Bausatz an zu lernen, wie man lötet! Mit diesem Lighthouse Lötbausatz kannst du die Grundlagen und einige fortgeschrittene Fähigkeiten des Lötens erlernen, indem du einen Isophase-Leuchtturm zusammenbaust! Der Zusammenbau eines Leuchtturms dauert ca. 10-20 Minuten mit einfachen Lötmaterialien (nicht im Lieferumfang enthalten). Keine Angst, ihr Liebhaber von Lovecraft und okkulten Leuchttürmen, durch Ändern des Widerstandswerts könnt ihr das Blinkmuster ändern! Jedes Lighthouse Beginner Soldering Kit enthält eine Leuchtturmplatine und -basis, einen CR2032-Batteriehalter, vier Widerstände, zwei NPN-Transistoren, zwei Kondensatoren, einen Netzschalter und eine einzelne weiße LED für das Leuchtturmlicht! Alles, was Sie (neben einem Lötkolben und Lötzinn) benötigen, ist eine CR2032 Knopfzellenbatterie, da diese nicht enthalten ist, um den Versand zu erleichtern. Hinweis: Da es sich bei diesem Produkt um einen Bausatz handelt, sind Montage und Grundkenntnisse im Löten erforderlich. Der Lighthouse Lötbausatz wird nicht vormontiert geliefert. Enthält: 1x Leuchtturm-Platine 1x Standplatine 1x weiße LED 1x 220-Ohm-Widerstand 1x 82k-Ohm-Widerstand 2x 220k-Ohm-Widerstände 2x 2N3904 NPN-Transistoren 2x 10uF-Kondensatoren 1x Netzschalter 1x CR2032-Batteriehalterung Dokumente: Schaltplan Montageanleitung Montagevideo

€12.90

Available · 9 piece · 1-3 days

SparkFun Leuchtturm, Lötset für Anfänger

KIT-14635

€12.90

Available · 9 piece · 1-3 days

Prices incl. VAT plus shipping costs

Optosupply Round Super LED, 5mm, green

Optosupply Round Super LED, 5mm, green This Optosupply Round Super LED with a diameter of 5mm is ideal for various applications where a green LED is required. It offers a brightness of 10 to 15mcd and a light angle of 30°. The LED has a curved, diffuse green lens and is suitable for through-hole mounting (THT). Features at a glance 5mm diameter: standard size for versatile applications Brightness: 10 to 15mcd Light angle: 30° for wide light scattering Technical specifications Diode type: LED LED diode diameter: 5mm LED colour diodes: yellow-green Brightness: 10...15mcd Illumination angle: 30° Wavelength λd: 565...575nm Diode lens: diffuse, green LED diode current: 20mA Mounting: THT Front: domed Output pitch: 2.54mm Operating voltage: 1.8...2.4V Scope of delivery 1x Optosupply Round Super LED, 5mm, green

€0.28

Available · 83 piece · 1-3 days

Optosupply Round Super LED, 5mm, green

LED5-G-LC

€0.28

Available · 83 piece · 1-3 days

Prices incl. VAT plus shipping costs

McPower solder, lead-free, Ø0.5mm, 100g roll

- 99.3% tin, 0.7% copper- lead-free- 0.5mm diameter- 100g on roll

€8.70

Available · 10 piece · 1-3 days

4-piece soldering set LS-303 - consisting of 30W soldering iron, desoldering pump, soldering iron stand, soldering tin

Good and super-affordable basic equipment for hobbyists, DIY enthusiasts and amateur electricians. Clean soldering quality for model making, jewellery repairs, connecting cables and many other applications.- 30 watt soldering iron- Solder in dispenser (3 m / 1.0 mm-Ø, 235 °C melting temp., 97% tin, 1% copper, 2% flux, 12 g)- Soldering iron stand- Desoldering pump- Operation at 230V- On blister card with Euro hanger- Scope of delivery: soldering iron, desoldering pump, soldering iron stand

€12.20

Available · 8 piece · 1-3 days

4-piece soldering set LS-303 - consisting of 30W soldering iron, desoldering pump, soldering iron stand, soldering tin

T1540010

€12.20

Available · 8 piece · 1-3 days

Prices incl. VAT plus shipping costs

VARTA button cell lithium CR2032, blister pack of 5

CR2032 (6032)Lithium button cell, 3 VHigh-tech primary button batteries designed to provide reliable power for small electronic devices such as toys, electronic games and computers, fitness equipment, security devices and alarm systems, electronic calculators, car keys, remote controls and medical applications.Technical data: - Technology: Lithium battery- Manufacturer's designation: DL2032 - IEC name: CR2032 - ANSI/NEDA name: 5004LC- Voltage: 3.00 V- Max. Capacity: 230.00 mAh- Rechargeable: no - Shelf life: up to 5 years- Diameter: 20.00 mm- Height: 3.20 mm- Weight: 3.00 g- Consumption unit: 5 pcs. in blister pack

€3.40

Available · 100+ piece · 1-3 days

VARTA button cell lithium CR2032, blister pack of 5

4008496850853

€3.40

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

Silicone soldering mat, 280x200mm

This versatile repair mat is ideal for soldering but is also perfect for organising DIY projects. Whether you are setting up a Raspberry configuration or repairing a smartphone or other electronic or technical components, this silicone mat brings order to any mess. Easy to clean, heat-resistant up to 500°C and the practical sorting compartments keep everything where it should be.Features:Size: 280 x 200mmHeat-resistant up to 500°Cwith 4 practical, separate compartments for sorting small itemsintegrated ruler up to 26cm

€4.90

Available · 78 piece · 1-3 days

Silicone soldering mat, 280x200mm

SIL-MAT-1

€4.90

Available · 78 piece · 1-3 days

Prices incl. VAT plus shipping costs

Day of the Geek Badge, Löt-Kit, schwarz

€9.50

Available · 2 piece · 1-3 days

Day of the Geek Badge, Löt-Kit, schwarz

KIT-20118

€9.50

Available · 2 piece · 1-3 days

Prices incl. VAT plus shipping costs

Third hand with real glass magnifying glass

Third hand with real glass magnifying glass Heavy cast iron stand with 8 ball joints and 2 movable clamps, as well as magnifying glass with glass lens (ø 60 mm) The ideal aid for all filigree soldering work where you need both hands to work! 2.5x magnification

€5.40

Available · 10 piece · 1-3 days

Third hand with real glass magnifying glass

51199

€5.40

Available · 10 piece · 1-3 days

Prices incl. VAT plus shipping costs

VARTA Longlife battery Alkaline 9V block

6LR61/6LP3146/9V Block (4922)Alkaline manganese battery (alkaline), 9 Vparticularly powerful for optimum performance in devices with high energy consumptionfor use in toys, computer accessories, torches, etc.Technical dataBatterySize 9V blockIEC name 6LR61/6LP3146Technology Alkaline manganese battery (alkaline)Voltage 9 VRechargeable noGeneralConsumable unit 1 pc. Blister packModel designation 4922Manufacturer designation 4922Length 48.5 mmWidth 17.5 mmHeight 26.5 mmWeight 44.3 g

€1.90

Available · 3 piece · 1-3 days

VARTA Longlife battery Alkaline 9V block

4008496559862

€1.90

Available · 3 piece · 1-3 days

Prices incl. VAT plus shipping costs

DFRobot light-seeking robot kit, for learning to solder

May I introduce: Mr NEON, the light-beam robot that can help children and beginners in electronics learn things like soldering and simple circuit skills. Mr NEON looks like a three-legged monster whose eyes or tentacles light up depending on the ambient light. The stronger the light, the faster it moves. It does not need to be programmed and all soldering is intuitive and beginner-friendly. It is therefore perfect for beginners in electronics. You can also give Mr NEON a different look by changing the print stickers. Scope of delivery Light Chaser Robot Kit x1 (CR2032 battery included) Documentation / Downloads User manual

€13.90

Available · 24 piece · 1-3 days

DFRobot light-seeking robot kit, for learning to solder

TOY0060

€13.90

Available · 24 piece · 1-3 days

Prices incl. VAT plus shipping costs

Copper switching wire, tinned, ø0.8mm, 10m

- blank, tinned - ring with 10 m

€3.65

Available · 8 piece · 1-3 days

New

Desoldering braid, width 2.0mm, length 1.50m

Desoldering braid 2.0 mmfor removing solder from soldered joints1.5 m on spool

€1.70

Available · 40 piece · 1-3 days

Hook set 140 mm, 6-piece

Practical hook set with 9 different shapes for scribing and modelling in model making and electronics. Supplied in a practical storage bag. Length approx. 140 mm

€4.40

Available · 1 piece · 1-3 days

Hook set 140 mm, 6-piece

Practical hook set with 9 different shapes for scribing and modelling in model making and electronics. Supplied in a practical storage bag. Length approx. 140 mm

E-RM16

€4.40

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

More Products from +++ SparkFun +++ to look at

SparkFun Micro OLED Breakout, 64x48 pixels, Qwiic, I2C, 10mA, addressable, 3.3V

€21.90

Currently not available

Details

SparkFun Micro OLED Breakout, 64x48 pixels, Qwiic, I2C, 10mA, addressable, 3.3V

SparkFun Micro OLED Breakout (Qwiic) The SparkFun Qwiic Micro OLED Breakout is a Qwiic-compatible version of the popular Micro OLED display! The small, monochrome, blue-on-black OLED screen provides incredibly clear images for your viewing pleasure. Despite its "micro" size, a surprisingly large amount of graphics can be displayed. This breakout is perfect for adding graphics to your next project and displaying diagnostic information without having to resort to serial output, all with the ease of use of the Qwiic Connect system! Features at a glance Monochrome, blue-on-black OLED display, 64x48 pixels. Two Qwiic connectors for easy I2C operations without soldering. Integrated 4.7kΩ pull-up resistors and selectable I2C address. two mounting holes and a practical Qwiic cable holder integrated in a removable tab on the board I2C pull-up jumper and ADDR jumper on the back of the board Technical data 2x Qwiic connections Operating voltage: 3.3V Operating current: 10mA (max. 20mA) Screen size: 64x48 pixels (0.66" diagonal) Interface: I2C I2C Selectable I2C address: 0x3D (standard), 0x3C (alternative) Dimensions: 1.08" x 1.17" Other data Note: A multiplexer/mux is required for communication with several Micro OLED sensors via a single bus. The Qwiic Mux Breakout is suitable for use with more than one Micro OLED sensor. Scope of delivery 1x SparkFun Micro OLED Breakout (Qwiic) Guide

LCD-22495

€21.90

Currently not available

Prices incl. VAT plus shipping costs

Details

SparkFun USB C Breakout Horizontal, VBUS, GND, CC1, CC2, D+, D-, SHLD Pins, Pitch Header, 1.5A - 3A

€5.90

Currently not available

Details

SparkFun USB C Breakout Horizontal, VBUS, GND, CC1, CC2, D+, D-, SHLD Pins, Pitch Header, 1.5A - 3A

This USB breakout lets you add a USB-C connector to your projects without having to solder on every tiny SMD pad. The SparkFun USB-C Breakout delivers up to three times more power than previous USB iterations and also solves the commonly frustrating dilemma of properly plugging in a USB cable because it's reversible! This board breaks out the VBUS, GND, CC1, CC2, D+ and D- pins of the USB-C connector into a 0.1-inch pitch header, delivering up to a nominal 1.5A of current and up to 3A depending on the upstream device. Features: Dimensions: 22.1mm x 14mm x 4.9mm (0.87in x 0.55in x 0.19in) Weight: 1.35g Documents: Schematic Eagle files USB Type C General Datasheet USB connector data sheet Github

BOB-15100

€5.90

Currently not available

Prices incl. VAT plus shipping costs

Details

Addressable WS2812 RGB LED, PTH, 5mm, clear, pack of 5

€4.10

Currently not available

Details

Addressable WS2812 RGB LED, PTH, 5mm, clear, pack of 5

Addressable WS2812 RGB LED, PTH, 5mm, clear, pack of 5 We know this looks like many of our other LEDs, but it's not! This is a PTH addressable RGB LED with a WS2812 (or "NeoPixel") control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it's much easier to solder into your project and comes in a clear 5mm package. With this RGB LED, the control IC has been moved into the actual LED so we wanted to bring you this amazing product! They are great if you need a lot of colour in a small board space, now more than ever. If you are looking for a great addressable LED in a common LED form factor, then this is the perfect choice for you. Features at a glance Form factor and mounting: Clear 5mm PTH version, easier to solder than SMD versions. Integrated control: Control IC WS2812 is built directly into the LED, provides RGB colour control. Application: Ideal for projects that require intense colours in a small space. Technical data: Power supply Power supply: DC 4.5V - 6V Internal frequency: 800kHz Transmission type: Single Wire Single Transmission Scope of delivery 5x PTH Addressable RGB LEDs Links Connection manual Data sheet Product video Get Started with the WS2812 Hookup Guide Note Supplied in packs of 5.

COM-12999

€4.10

Currently not available

Prices incl. VAT plus shipping costs

Details

Addressable WS2812 RGB LED, PTH, 5mm, diffuse, 5-pack

€4.15

Currently not available

Details

Addressable WS2812 RGB LED, PTH, 5mm, diffuse, 5-pack

Addressable WS2812 RGB LED, PTH, 5mm, diffuse, pack of 5 We know these look like many of our other LEDs, but they're not! These are PTH addressable RGB LEDs with a WS2812 (or "NeoPixel") control IC built right into them. This PTH version is incredibly similar to its SMD cousin, except it's much easier to solder into your project and is in a diffuse 5mm package. With this RGB LED, the control IC has been moved into the actual LED so we wanted to bring you this amazing product! They are great if you need a lot of colour in a small board space, now more than ever. If you are looking for a great addressable LED in a common LED form factor, then this is the perfect choice for you. Features at a glance Simplicity: Easier to solder with PTH design compared to SMD. Lots of colour, little space: Ideal for compact designs that require vibrant colours. Integrated control: WS2812 control IC integrated for addressable colour changes. Technical specifications Power supply: DC 4.5V - 6V Internal frequency: 800kHz Transmission type: Single wire single transmission Scope of delivery 5x RGB Addressable LED, PTH, 5mm, Diffused Links Connection manual Data sheet Get Started with the WS2812 Hookup Guide Hookup Guide Supplied in packs of 5.

COM-12986

€4.15

Currently not available

Prices incl. VAT plus shipping costs

Details

Addressable WS2812 RGB LED, PTH, 8mm, diffuse, pack of 5

€4.20

Available · 30 piece · 1-3 days

Addressable WS2812 RGB LED, PTH, 8mm, diffuse, pack of 5

We know this one looks like many of our other LEDs, but it's not! This is a PTH addressable RGB LED with a WS2812 (or "NeoPixel") control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it's much easier to solder into your project and is in a diffuse 8mm package. With this RGB LED, the control IC has been moved into the actual LED, so we wanted to bring you this amazing product! They are great if you need a lot of colour in a small amount of board space, now more than ever. If you are looking for a great addressable LED in a common LED form factor, then this is the perfect choice for you. Note: Supplied in packs of 5. Get Started with the WS2812 Hookup Guide Features: Power supply: DC 4.5V - 6V Internal frequency: 800K Hz Single wire single transmission Documents: Connection manual Data sheet Product video

COM-12877

€4.20

Available · 30 piece · 1-3 days

Prices incl. VAT plus shipping costs

Antennen- / Stativ-Gewindeadapter - 1/4 Zoll auf 5/8 Zoll

€6.55

Available · 15 piece · 1-3 days

Antennen- / Stativ-Gewindeadapter - 1/4 Zoll auf 5/8 Zoll

Dieser Aluminiumadapter konvertiert das weit verbreitete 1/4"-Gewinde von Kamera-Drei- und Einbeinstativen in das 5/8"-11-TPI-Gewinde (Gewinde pro Zoll) von hochwertigen Vermessungsantennen und -geräten. Er ist ideal für die Montage von RTK-Vermessungsantennen auf einem Einbeinstativ oder Dreibeinstativ.

PRT-17546

€6.55

Available · 15 piece · 1-3 days

Prices incl. VAT plus shipping costs

Arduino Pro Mini 328, 3.3V/8MHz

€11.50

Available · 1 piece · 1-3 days

Arduino Pro Mini 328, 3.3V/8MHz

Arduino Pro Mini 328, 3.3V/8MHz The Arduino Pro Mini is a minimalist design from SparkFun for Arduino. This is a 3.3V Arduino with an 8MHz bootloader. The board comes without pre-installed pin headers so that individual connectors or wires can be soldered in. It is ideal for experienced users who are familiar with the limitations of the system voltage and the lack of connectors and USB outside the board. Features at a glance ATmega328 runs at 8MHz 3.3V operating voltage Supports auto-reset Power and status LEDs on the board USB connector outside the board Technical specifications Operating voltage: 3.3V DC input: 3.3V to 12V Analogue pins: 8 Digital I/O pins: 14 Max. Output: 150mA Dimensions: 18x33mm Weight: less than 2 grams Low-voltage board, no interface circuit to 3.3V devices required Supports FTDI basic breakout board and auto-reset 0.8mm thin board Other data External resonator with 0.5% tolerance Overcurrent protection OSHW logo Scope of delivery 1x Arduino Pro Mini 328 Documentation: Circuit diagram Eagle files Tutorial for the first steps Graphical data sheet GitHub

DEV-11114

€11.50

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

Arduino Pro Mini 328, 5V/16MHz

€11.90

Available · 4 piece · 1-3 days

Arduino Pro Mini 328, 5V/16MHz

It's blue! It is thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. The Arduino Pro Mini does not come with assembled connectors, so you can solder in any connector or wire with any orientation. We recommend that Arduino beginners start with the Uno R3. It's a great board to get you started quickly. The Arduino Pro series is for users who understand the limitations of the system voltage (5V), lack of connectors and USB outside the board. We really wanted to minimise the cost of an Arduino. To achieve this, we used all SMD components, made it dual layer, etc. This board connects directly to the FTDI Basic Breakout Board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable, but the FTDI cable does not bring out the DTR pin, so the auto-reset function will not work. There is a voltage regulator on board so it can accept a voltage up to 12VDC. If you power the board with unregulated voltage, make sure you connect it to the "RAW" pin and not VCC. The latest and greatest version of this board breaks out the ADC6 and ADC7 pins and adds footprints for optional I2C pull-up resistors! We've also taken the opportunity to put the OSHW logo on it. Note: A portion of this sale goes back to Arduino LLC to fund further development of new tools and new IDE features. Features: ATmega328 runs at 16MHz with external resonator (0.5% tolerance) 0.8mm thin board USB connector outside the board Supports auto-reset 5V regulator Max. 150mA output Overcurrent protection Weighs less than 2 grams! DC input 5V to 12V Power and status LEDs on the circuit board Analogue pins: 8 Digital I/Os: 14 0.7x1.3" (18x33mm) Documents: Circuit diagram Eagle files Tutorial for the first steps Graphical data sheet GitHub

DEV-11113

€11.90

Available · 4 piece · 1-3 days

Prices incl. VAT plus shipping costs

AVR Programming Cable

€2.50

Currently not available

Details

AVR Programming Cable

This is a practical AVR programming cable that contains both the 10-pin and 6-pin ISP programming interface. The cable is approx. 12" long and fits with pins on 1/10in centres.

CAB-09215

€2.50

Currently not available

Prices incl. VAT plus shipping costs

Details

Battery holder for 3x Mignon AA with cover and switch, JST connector

€1.80

Available · 10 piece · 1-3 days

Battery holder for 3x Mignon AA with cover and switch, JST connector

This 3xAA battery holder adds the finishing touch to your battery-powered project. This holder features a removable, sliding cover and an ON/OFF switch that allows you to control the power supply for your project. The 6" (~150mm) cable is terminated with a JST connector. Note: Please note that JST connectors are not suitable for constant and repeated unplugging and plugging and may wear out over time.

PRT-18769

€1.80

Available · 10 piece · 1-3 days

Prices incl. VAT plus shipping costs

Breadboard to JST-GHR-06V cable - 6-pin, 1.25mm pitch

€1.90

Currently not available

Details

Breadboard to JST-GHR-06V cable - 6-pin, 1.25mm pitch

Breadboard to JST-GHR-06V Cable - 6-Pin, 1.25mm Pitch This is a handy cable to connect a six-pin lockable GHR-06V connector to breadboard-friendly connector pins. The cable is equipped with a 1.25 mm pitch locking GHR-06V-JST connector as found on some sensors, radios and other small devices. Features at a glance Six-pin GHR-06V type locking connector 1.25mm pitch for precise connections Ideal for sensors, radios and small devices Technical Specifications Wire type: 28 AWG 1.25mm pitch Contact resistance: 10 Ohm Insulator resistance: 5 MOhm High dielectric strength: DC 300V for 0.01 sec. Cable type: UL1571 28AWG Cable jacket: 80P PVC Cable colours: black, brown, red, yellow, green, blue Cable length: 165mm Scope of delivery 1x breadboard to JST-GHR-06V cable, 6-pin, 1.25mm pitch Links Datasheet

CAB-18079

€1.90

Currently not available

Prices incl. VAT plus shipping costs

Details

Breakout board for XBee modules

€4.15

Currently not available

Details

Breakout board for XBee modules

This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee onto a two row header with 0.1" standard spacing. The spacing between the 0.1" connectors is 0.5" so the board is DIP friendly. We strongly recommend using the female headers to avoid having to permanently solder the XBee to the breakout board. This is the board only. Please order the corresponding 2mm sockets (you need 2!) and 0.1" pin headers as well. Documents: Circuit diagram Eagle files 5V interface to 3V XBee module X-CTU software GitHub (design files)

BOB-08276

€4.15

Currently not available

Prices incl. VAT plus shipping costs

Details

Capacitive fingerprint scanner, AS-108M

€25.60

Currently not available

Details

Capacitive fingerprint scanner, AS-108M

Fingerprint scanners have been readily available at the consumer level for several years now, so it's only logical that they continue to grow and evolve over time. That's what brings us to this capacitive fingerprint scanner from ADH-Tech. The AS-108M fingerprint sensor module is a combination fingerprint scanner and MCU that provides a UART interface for easy functionality. The AS-108M stands out from other fingerprint scanners in that it reads the image of a fingerprint by pixel array and provides ridge or valley signals to the A/D converter and digital processor and then to the serial peripheral interface to read the data. The on-board MCU uses a fingerprint algorithm that allows you to use MCU-SOC commands via UART to operate modules such as fingerprint reading, match operations and more. The AS-108M offers an image resolution of 508dpi, a recognition time of less than 0.6 seconds and can store up to 100 high-quality templates. Unlike other fingerprint scanners, this version comes with an interface cable with a 6-pin connector output that plugs into the connection port for easy setup and installation. Includes: 1x Capacitive fingerprint scanner - AS-108M 1x interface cable 1x interface cable connector Features: 160x160 pixels Built-in ADC for image digitisation UART interface Data encryption Short readout time Documents: Data sheet User manual of the module Connector specifications Cable description

SEN-17151

€25.60

Currently not available

Prices incl. VAT plus shipping costs

Details

Conductive thread, 12m, smooth, stainless steel

€5.90

Currently not available

Details

Conductive thread, 12m, smooth, stainless steel

This is 12 metres of smooth, conductive thread spun from stainless steel fibres and wound onto a plastic bobbin. You can use it to sew all your e-textile projects. This small spool is a great way to get into wearable electronics without the expense of buying a whole spool of thread. Almost 40 feet of thread is enough to sew a simple design onto your shirt, backpack or hat. What sets this thread apart from the other conductive threads we carry is the fact that it is actually spun from 12UM stainless steel fibres, making it incredibly smooth and without the loose hairs seen in other spools. This means that while it's not easy to solder because it's stainless, it also won't burn if you touch it with a soldering iron. Suitable for hand and machine sewing (as bobbin thread). We had no problems using it for tight joins, but if you are worried, you should treat the thread with wax to keep it manageable! Features: Material: 12UM stainless steel fibre Weight per gram:0.2458g/m Thickness:2.8KGF Diameter(mm):0.12 Resistance (?/m) : 27 12m per spool (on plastic spools)

DEV-13814

€5.90

Currently not available

Prices incl. VAT plus shipping costs

Details

Conductive thread, 30ft / approx. 9m, stainless steel

€4.70

Available · 1 piece · 1-3 days

Conductive thread, 30ft / approx. 9m, stainless steel

This is a 30 foot long conductive thread spun from stainless steel fibres and wound onto a plastic bobbin. You can use it to sew all your e-textile projects. This small spool is a great way to get into wearable electronics without the expense of buying a whole spool of thread. 30 feet of thread is enough to sew a simple design onto your shirt, backpack or hat. What sets this thread apart from the other conductive threads we carry is the fact that it is spun from this stainless steel fibre and does not have a nylon core. This means that although it is not easy to solder because it is stainless, it will not burn if you touch it with a soldering iron. It's suitable for hand or machine sewing (as a bobbin thread) and is particularly 'toothy', meaning it clings firmly to the fabric - if you've had problems with slippery conductive threads that won't lay flat or knot, this thread will be a welcome remedy. We've had no problems using it for tight, firm joins, but if you're worried, waxing the thread should ensure it stays manageable! Features: Made from stainless steel fibres Resistance: 28 Ohm/Ft

DEV-10867

€4.70

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

Copper adhesive tape, 5mm, 15m

€4.20

Available · 84 piece · 1-3 days

Copper adhesive tape, 5mm, 15m

Copper tape has countless applications in electronics, from making flat traces for electrical components to RF shielding and antenna construction. Copper tape is even used to connect things with solder, such as the stained glass on Tiffany lamps.This copper tape has an adhesive backing, is 5mm wide and comes in rolls of 15m.Thickness: 3 mil

PRT-10561

€4.20

Available · 84 piece · 1-3 days

Prices incl. VAT plus shipping costs

Copper adhesive tape, conductive adhesive, 5mm, 15m

€6.50

Available · 35 piece · 1-3 days

Copper adhesive tape, conductive adhesive, 5mm, 15m

Copper tape has countless applications in electronics, from making flat traces for electrical components to RF shielding and antenna construction. Copper tape is even used to connect things with solder, such as the coloured glass on Tiffany lamps. This copper tape has a conductive adhesive, is 5 mm wide and comes in rolls of 15 metres. Perfect for more precise projects. Documents: Data sheet [MSDS](https://cdn.sparkfun.com/datasheets/Prototyping/Copper foil tape MSDS-EN.pdf)

PRT-13827

€6.50

Available · 35 piece · 1-3 days

Prices incl. VAT plus shipping costs

Day of the Geek Badge, Löt-Kit, schwarz

€9.50

Available · 2 piece · 1-3 days

Day of the Geek Badge, Löt-Kit, schwarz

KIT-20118

€9.50

Available · 2 piece · 1-3 days

Prices incl. VAT plus shipping costs

Digital Voltmeter Ammeter 30V 10A Red and Blue

€6.55

Available · 1 piece · 1-3 days

Digital Voltmeter Ammeter 30V 10A Red and Blue

While a DMM is suitable for a quick check, a panel-mounted current and voltage meter is handy if you need to constantly monitor a system. Battery-powered systems can be quickly diagnosed by checking the overall system voltage; run times can be calculated based on instantaneous power consumption rates. For all these cases and more, it's just super handy to have a meter at hand. This digital combination DC current and voltage meter measures up to 30 V and 10 A at a quiescent current of about 15 mA. All devices are supplied pre-calibrated, but can be further calibrated after installation with a small trimpot on the back of the device. The wiring diagram shows normal cabling. The thicker 2-pin harness is for the ammeter and is normally wired into the current feedback path to the battery or ground. The thinner 3-pin harness is for the voltmeter. The black wire of the 3-pin harness is internally connected to the ammeter and can be wired to NC (not connected) or ground. The red wire of the ammeter should be connected to the system and the black wire of the ammeter should be connected to ground, otherwise the system will work but the meter will display 0.00 as it cannot display negative values. Features: Dimensions Bevel: 48 x 29 x 3mm Base: 19 x 44.5 x 25.7mm Cut-out: 46 x 27mm Max. Current: 10A Max. Voltage: 30V Accuracy Current: ±1% Voltage: ±0.1% Quiescent: 15mA avg

TOL-18374

€6.55

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

Disposable surface EMG/ECG/EKG electrodes, 24 mm, pack of 10

€10.65

Currently not available

Details

Disposable surface EMG/ECG/EKG electrodes, 24 mm, pack of 10

This is a pack of 10 Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG. These small pads are perfect for short-term monitoring of neurofeedback and biofeedback purposes. They are single-use and very handy thanks to the integrated, latex-free gel. Each pad adheres very well to the skin and the snap-on connector can be easily slid onto or removed from the electrode lead. Note: This product is NOT a medical device and is not intended to be used as such or as an accessory to such a device. Features: 24mm x 1mm 4 mm connection Documents: Data sheet Product video

SEN-12969

€10.65

Currently not available

Prices incl. VAT plus shipping costs

Details

Dual Band WLAN Antenne (2.4GHz, 5.8GHz), u.FL Anschluss

€2.50

Currently not available

Details

Dual Band WLAN Antenne (2.4GHz, 5.8GHz), u.FL Anschluss

Diese selbstklebende Dualband-Antenne ist perfekt für Situationen, in denen Sie versuchen, ein Signal von einem Sender zu empfangen, den Sie in ein Gehäuse geklemmt haben. Sie funktioniert im 2,4-GHz- oder 5,8-GHz-Band und eignet sich hervorragend für WiFi, Bluetooth oder ZigBee. Schließen Sie die Antenne einfach mit dem beiliegenden U.FL-Stecker an, und dann abziehen und aufkleben! Features: Frequenzbereich: 2400-2500Mhz/5150-5850Mhz Gewinn: 8dBi interne Antenne VSWR: <1.8 Polarisation: Vertikal Eingangsimpedanz: 50Ω Leistung: 30w Größe: 95x13x1mm Kabellänge: 100mm Kabeltyp: 1.13 Coax-Kabel Stecker: U.FL Befestigung: 3M Aufkleber Betriebstemperatur: - 40 °C ~ + 80 °C Lagerungstemperatur: - 40 °C ~ + 80 °C Dokumente: Datenblatt

WRL-18087

€2.50

Currently not available

Prices incl. VAT plus shipping costs

Details

Dual LED 7-segment display, RGB

€5.35

Currently not available

Details

Dual LED 7-segment display, RGB

This is not your basic 7-segment display. The dual 7-segment display has two digits with an RGB LED in each individual segment! So now you have a small 7-segment LED in your project with a full colour display! The dual 7-segment display is breadboard friendly and has a digit height of 0.56in (14.22mm). The red LEDs have a forward voltage of 2VDC, 2.85VDC for green and 2.95VDC for blue, with a continuous forward current per segment of 10mA for the red LEDs and 5mA for the green and blue. Documents: Datasheet

COM-13999

€5.35

Currently not available

Prices incl. VAT plus shipping costs

Details

ESP32 Thing Stackable Header Set

€2.10

Available · 2 piece · 1-3 days

ESP32 Thing Stackable Header Set

These headers are designed for use with the SparkFun ESP32 Thing to connect to ESP32 Shield Boards. Each set of headers makes your ESP32 Thing easily stackable with the Power Control, Environmental, or Motion Shields as well as other applications. This set includes two 1x20 headers, enough to connect your ESP32 to anything you want! Contains: 2x 20-pin stackable header Documents: Dimensional drawing

PRT-14311

€2.10

Available · 2 piece · 1-3 days

Prices incl. VAT plus shipping costs

Fingerprint scanner, TTL, GT-521F52

€70.15

Available · 2 piece · 1-3 days

Fingerprint scanner, TTL, GT-521F52

Fingerprint scanners are ingenious! Why use a key when you have one right at the tip of your finger? Unfortunately, they are often unreliable or difficult to implement. Not anymore! This awesome GT-521F52 fingerprint module from ADH-Tech communicates via TTL Serial so you can easily incorporate it into your next project. The module itself handles the entire task of reading and identifying fingerprints with an integrated optical sensor and a 32-bit ARM Cortex M3 processor. To get started, simply register each fingerprint you want to save by sending the appropriate command and pressing your finger against the reader three times. The fingerprint scanner can store different fingerprints, and the database of prints can even be downloaded from the device and distributed to other modules. In addition to the fingerprint "template", the analysed version of the print, you can retrieve the image of a fingerprint and even pull raw images from the optical sensor! This module is the upgraded version of the GT-521F32 and can store up to an amazing 3,000 different fingerprints! It is able to recognise 360° fingerprints and download/upload templates via the serial interface. In addition, the GT-521Fxx series offers a resolution of 450dpi, with a false acceptance rate of <0.001% and a false rejection rate of <0.1%, while taking only <1.5 seconds to identify a unique fingerprint! The module is small and easy to mount, with four mounting holes surrounding the sensor. The onboard JST-SH connector has four signals: Vcc, GND, Tx and Rx. A compatible JST-SH pigtail can be found in the "Hookup Accessories" section below. Note: Please note that while this fingerprint scanner is equipped with the same connector we use on all of our Qwiic boards, it is NOT Qwiic or I2C compatible. This means all our Qwiic cables, such as our 100mm version, will work for this board. Features: Simple UART & USB communication protocol Complies with USB 2.0 full-speed specification Ultra flat optical sensor 450 dpi resolution Capable of 360° recognition Memory for 3,000 unique fingerprints Wake up with finger function Works well with dry, wet or rough fingerprints Anti-scratch with high surface hardness ? 5H 1:1 verification, 1:N identification High precision and high speed fingerprint identification technology 4x mounting holes 2x JST SH connectors Documents: Instructions for the fingerprint scanner (GT-521Fxx) Connection instructions Data sheet Programming instructions SDK Demo Software

SEN-14585

€70.15

Available · 2 piece · 1-3 days

Prices incl. VAT plus shipping costs

Flex Sensor 2.2" / 5.6cm

€14.20

Currently not available

Details

Flex Sensor 2.2" / 5.6cm

A simple flex sensor with a length of 2.2" / approx. 5.6 cm. When the sensor is bent, the resistance across the sensor increases. Patented technology from Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on the inside of the bend). The connector is 0.1" apart and breadboard friendly. Check the datasheet for full specifications. Note: Please refrain from bending or stressing this sensor at the base. The usable area of the sensor can easily be bent, but care should be taken to minimise bending outside the usable area. For best results, mount the base and the lower part firmly and only allow the flex sensor itself to bend. Documents: Data sheet ITP Sensor Workshop Quick start guide

SEN-10264

€14.20

Currently not available

Prices incl. VAT plus shipping costs

Details

Flex Sensor 4.5" / 11.4cm

€23.50

Available · 1 piece · 1-3 days

Flex Sensor 4.5" / 11.4cm

A simple flex sensor with a length of 4.5" / approx. 11.4 cm. When the sensor is bent, the resistance across the sensor increases. Patented technology from Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on the inside of the bend). The connector is 0.1" apart and breadboard friendly. Check the datasheet for full specifications. Documents: Datasheet (FS7548) ITP Sensor Workshop Connection instructions

SEN-08606

€23.50

Available · 1 piece · 1-3 days

Prices incl. VAT plus shipping costs

Garmin LIDAR-Lite v3, up to 40m range, 1000Hz sampling rate, I2C/PWM, 5V DC

€159.90

Currently not available

Details

Garmin LIDAR-Lite v3, up to 40m range, 1000Hz sampling rate, I2C/PWM, 5V DC

SparkFun Garmin LIDAR-Lite v3, range up to 40 m, 1000 Hz, I2C/PWM, 5V DC The LIDAR-Lite v3HP from Garmin is a compact, high-performance optical distance measurement sensor, ideal for use in drones, robots or unmanned vehicles. With a range of 1 m to 40 m and a faster sampling rate of more than 1 kHz, it offers efficient performance and precise measurements. It is housed in a robust, IPX7-certified housing and consumes less power than its predecessor. Features at a glance Optical range from 1m to 40m with a resolution of 1cm and a typical accuracy of +/- 2.5cm at distances over 2m High sampling rate of over 1 kHz, usable via I2C or PWM interfaces. Energy efficient with a current consumption of 65 mA in idle mode and 85 mA during measurement. Technical specifications Laser type: 905nm (1.3 Watt) edge-emitting, single-stripe laser Power supply: Operating voltage 4.75-5VDC; max. 6V Update rate: Greater than 1kHz Interfaces: I2C or PWM Dimensions: 24.5mm x 53.5mm x 33.5mm Weight: 34g Other data Temperature range: -20°C to 60°C Water resistance: IPX7 Laser wavelength/peak power: 905nm / 1.3W Beam divergence: 8m radian Optical aperture: 12.5mm Scope of delivery 1x Garmin LIDAR-Lite v3HP 1x user manual 1x Connection guide Documents: Operation Manual Hookup Guide Arduino Library Important Safety and Product Info Garmin Support Centre

SEN-14599

€159.90

Currently not available

Prices incl. VAT plus shipping costs

Details

GNSS Multi-Band Antenne, magnetisch, SMA-Stecker, 5m

€85.40

Currently not available

Details

GNSS Multi-Band Antenne, magnetisch, SMA-Stecker, 5m

Die ANN-MB-00 GNSS-Multibandantenne unterscheidet sich von anderen GNSS/GPS-Antennen dadurch, dass sie sowohl das klassische L1 GPS-Band als auch das neu eingeführte (seit 2005) L2 GPS-Band. Darüber hinaus ist das ANN-MB-00 von u-blox sehr gut verarbeitet und verfügt über einen magnetischen Sockel mit Befestigungslöchern für eine zusätzliche Verankerung in den rauesten Umgebungen. Sie wurde für die neueste F9-Plattform von u-blox - einschließlich des ZED-F9P-Moduls - entwickelt und bietet eine schnelle, einfache und zuverlässige Multiband-Antennenlösung, kann aber mit jedem GPS/GNSS-Empfänger verwendet werden, der vom L1/L2-Dualempfang profitieren kann. Diese Antenne unterstützt GPS, GLONASS, Galileo und BeiDou und umfasst ein leistungsstarkes Multiband-RHCP-Dual-Feed-Patch-Antennenelement, einen eingebauten LNA mit hoher Verstärkung und SAW-Vorfilterung sowie ein 5 m langes SMA-Kabel. Features: Frequenz: L1 Band: 1559-1606MHz L2/L5 Band: 1197-1249MHz Spitzenverstärkung (über 15cm Durchmesser Grundfläche): L1 Band: 3.5dBic L2/L5 Band: 0-2.0dBic VSWR: max. 2 Bandbreite: min. 200MHz Impedanz: 50 Ohm Polarisation RHCP Unterstützt GPS, GLONASS, Galileo und BeiDou 5m Koaxialkabel mit SMA-Stecker Magnetischer Sockel, feste Installationsmöglichkeit (Schraubmontage, 2 x M4 Schrauben) Abmessungen: 60,0mm x 82,0mm x 22,5mm Gewicht: 175g (einschließlich Kabel) Dokumente: Datenblatt (ANN-MB-00) Produktübersicht

GPS-15192

€85.40

Currently not available

Prices incl. VAT plus shipping costs

Details

GPS Module - GP1818MK (56 Channel)

€23.75

Currently not available

Details

GPS Module - GP1818MK (56 Channel)

The GP-1818MK is a low-cost, high-performance GPS module with an integrated antenna. It can provide position, speed and accurate time information via the standard NMEA-0183 protocol. With its low power consumption and compact design, the GP-1818MK is perfect for basic tracking and positioning tasks, especially with regard to battery-powered systems. This is the recommended replacement for the 20U7 module. Only minimal changes are required to switch from this module to the GP-1818MK. The module comes with a 3-pin connector similar to the 20U7 module. It has the same 56-channel functions with low power consumption. Features: Based on the powerful MT3337 GPS single chip High sensitivity -165 dBm Low power consumption: Max 55mA @ 3.3V Integrated LNA with low gain mode for active antenna option 66 channels in search mode and 33 channels "All-in-View" tracking Up to 60,000 simultaneous search windows for fast TTFF and high-sensitivity detections Average cold start time under 29 seconds (clear sky) Supports the standard NMEA-0183 protocol Antenna size: 18mm W x 18mm D x 7mm H RoHS compliant (lead free) Documents: Datasheet

GPS-19166

€23.75

Currently not available

Prices incl. VAT plus shipping costs

Details

GPS receiver, GP-20U7, 56 channels

€23.20

Currently not available

Details

GPS receiver, GP-20U7, 56 channels

The GP-20U7 is a compact GPS receiver with an inbuilt powerful all-in-one GPS chipset. The GP-20U7 provides accurate position, speed and time measurements and has high sensitivity and tracking capabilities. Thanks to the low power consumption required by this receiver, the GP-20U7 is ideal for portable applications such as tablet PCs, smartphones and other devices that require positioning. This 56-channel GPS module, which supports the standard NMEA-0183 and uBlox 7 protocol, has a low power consumption of [email protected] (max), an onboard antenna and a tracking sensitivity of -162dBm. With 56 channels in search mode and 22 channels of all-in-view tracking, the GP-20U7 is quite a workhorse for its size. Features: 56-channel receiver (22-channel all-in-view) Sensitivity: -162dBm 2.5m position accuracy Cold start : 29s (Open Sky) 40mA @ 3.3V 3-pin JST assembled cable* 18.4mm x 18.4mm x 4mm Documents: Datasheet (GP-20U7)

GPS-13740

€23.20

Currently not available

Prices incl. VAT plus shipping costs

Details

GPS receiver, GP-735, 56 channels

€49.90

Available · 20 piece · 1-3 days

GPS receiver, GP-735, 56 channels

The GP-735 is a slim, ultra high performance and easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 seconds cold start time, the GP735 is a tiny but powerful piece of technology. The slim design makes it ideal for applications where you don't have a lot of space available. It's really quite small. This 56-channel GPS module, based on the 7th generation uBlox chipset, has an operating voltage of 3.3~5.5V, an antenna on the board and is connected to your system via TTL serial. The update rate of 1Hz is fast enough for most applications (and can be increased to 10Hz if required). So whether you're tracking a pet or building an autonomous car, the GP-735 has you covered! Note: We carry the "T" option of this module, which is TTL-UART and not USB. This receiver works with 6-pin JST cables and connectors with 1 mm spacing, which you can find in the Recommended Products section below! Features: 35 x 8 x 6.5 mm Documents: Data sheet GPS evaluation software

GPS-13670

€49.90

Available · 20 piece · 1-3 days

Prices incl. VAT plus shipping costs

GPS/GNSS Antenne, magnetisch, SMA-Stecker, 3m

€16.60

Currently not available

Details

GPS/GNSS Antenne, magnetisch, SMA-Stecker, 3m

Normale GPS-Antennen sind für den GPS-Empfang optimiert, was großartig ist, aber mit immer mehr Modulen, die zusätzliche Konstellationen verfolgen können (sogenannte GNSS-Empfänger), brauchen Sie die richtige Antenne! Diese außergewöhnliche GPS/GNSS-Antenne ist sowohl für den GPS- als auch für den GLONASS-Empfang ausgelegt. In Verbindung mit der SparkFun GPS-Grundplatte erreicht diese Antenne hervorragende TTFF- und SIV-Statistiken sowohl für GPS- als auch für GLONASS-Konstellationen. Die magnetische Halterung ermöglicht die einfache Montage auf einer Metallunterlage wie einer Bodenplatte oder einem Autodach. Die Antenne ist mit einem 3 m langen Kabel und einem Standard-SMA-Stecker ausgestattet. Merkmale: Abmessungen: 50x38x17mm Gewicht: 75g inklusive 3m Kabel Frequenzbereich: 1575 - 1610MHz GPS Mittenfrequenz: 1575.42MHz GLONASS Mittenfrequenz: 1602MHz LNA Spannung: 3 bis 5VDC LNA-Verstärkung: 28dB LNA-Strom: 10mA Anschlussstecker: SMA Impedanz: 50? Rechtsseitige Polarisierung Kabellänge: 3 Meter

GPS-14986

€16.60

Currently not available

Prices incl. VAT plus shipping costs

Details

Hobby geared motor, 140 rpm, 2 pieces

€6.55

Currently not available

Details

Hobby geared motor, 140 rpm, 2 pieces

This is a pair of hobby geared motors from DAGU. These gearmotors are the same ones recommended for use in the Shadow chassis and offer an inexpensive and easy to use setup to get your wheels turning. Each Hobby geared motor also features a 9mm long output on a straight axle. These geared motors require a voltage of 4.5V with an idle current of 190mA, while having a gear ratio of 48:1 and a wheel speed of 140 rpm unloaded. Each motor order is sold in packs of two. Note: The speed specified in the data sheet is 90RPM. Based on our own testing, we have found that the gearmotors can actually achieve an idle speed of approximately 140 RPM. Features: Suggested voltage: 4.5VDC No-load speed: 140RPM Current at no load: 190mA Max. Load current: 250mA Torque: 800 gf-cm Documents: Data sheet (DG01D)

ROB-13302

€6.55

Currently not available

Prices incl. VAT plus shipping costs

Details

Hobby geared motor, 65 rpm, right angle, 2 pieces

€6.50

Available · 13 piece · 1-3 days

Hobby geared motor, 65 rpm, right angle, 2 pieces

Hobby geared motor, 65 rpm, right angle, 2 pieces Get ready to take your projects to the next level with the DAGU Hobby geared motors, perfect for any maker! These robust, right-angle motors are ideal for installation in your robots, providing precise wheel rotation at an impressive speed of 65 rpm. With a voltage of 3-6V, they are extremely flexible to use in a wide range of projects. You benefit from powerful performance with a standstill current of up to 3A at 6V, meaning your designs won't stall even under load. Their 48:1 gear ratio offers the perfect balance between torque and speed. These geared motors are sold in packs of two. Features at a glance Perpendicular arrangement enables accurate tracking of wheel rotation. Easy integration into various robot kits such as Magician Chassis and RedBot. Sold in packs of two - ideal for building or expanding your projects. Technical specifications Voltage: 3V - 6V Speed without load: 65RPM Current without load: 200mA Current at standstill: 3A at 6V (1.5A at 3V) Gear ratio: 48:1 Wheel speed: 65rpm @ 3V unloaded (recommended) Scope of delivery 2x Hobby geared motor, 65 rpm Links Data sheet (DG02S) Product video

ROB-13258

€6.50

Available · 13 piece · 1-3 days

Prices incl. VAT plus shipping costs

Hobby Motor - Gearbox

€2.50

Currently not available

Details

Hobby Motor - Gearbox

This is our new hobby motor now with a 6mm, 10 tooth, gearbox to make your basic projects a little easier to manage. It works well for basic things like making a fan or spinning something pretty fast without much resistance. The motor has a normal operating voltage range of 1.0 to 3.0VDC, but can handle a maximum load of up to 12VDC and an idle speed of 6600±10% RPM (@1.0V DC, 110mA). Further information can be found in the data sheet linked below. Note: Although the data sheet for this hobby motor specifies a maximum voltage range of 3.0VDC, our supplier has assured us that it can handle a maximum load of 12VDC. Documents: Data sheet (M260)

ROB-11696

€2.50

Currently not available

Prices incl. VAT plus shipping costs

Details

Kunden kauften auch

SparkFun Leuchtturm, Lötset für Anfänger

€12.90

Available · 9 piece · 1-3 days

SparkFun Leuchtturm, Lötset für Anfänger

KIT-14635

€12.90

Available · 9 piece · 1-3 days

Prices incl. VAT plus shipping costs

Waveshare 16-Pin PCIe zu M.2 Adapter für Raspberry Pi 5, SSD, NVMe Gen2 & Gen3, LED Statusanzeige

PCIe zu M.2 Adapter für Raspberry Pi 5 Dieser Adapter ermöglicht den Anschluss eines NVMe-Protokoll M.2 Solid State Drives an den Raspberry Pi 5 für High-Speed Lese-/Schreibvorgänge. Mit Unterstützung für Gen2 und Gen3 Modi sowie die Möglichkeit, den Pi 5 von einem Solid State Drive zu booten, verbessert dieser Adapter die Performance und Erweiterbarkeit Ihres Raspberry Pi 5 erheblich. Merkmale im Überblick High-Speed Lese-/Schreibzugriff: Ermöglicht den Anschluss eines NVMe-Protokoll M.2 Solid State Drive an Raspberry Pi 5. Kompatibilität: Unterstützt 2230/2242 Größen M.2 Solid State Drives und Gen2/Gen3 Modi für verbesserte Performance. Erweiterte Funktionen: Onboard Dual-LED-Indikatoren für Statusüberwachung und Power-Monitoring-Chip für stabileren Betrieb. Technische Daten Adaptertyp: PCIe zu M.2 für Raspberry Pi 5 Unterstützte SSD-Größen: 2230/2242 Unterstützte Modi: Gen2, Gen3 Anschluss: 16-Pin PCIe Interface von Raspberry Pi 5 LED-Indikatoren: Dual, für Arbeitsstatus Zusätzliche Features: Power-Monitoring-Chip, EEPROM, Luftstromöffnung für Kühlventilator Sonstige Daten Luftstromöffnung für bessere Kühlung des Pi5 und der Solid State Drive Lieferumfang 1x PCIe zu M.2 HAT+ 1x 2*20 Pin Header 1x 16P-Kabel-40mm 1x Abstandshalter-Set Wiki: https://www.waveshare.com/wiki/PCIe_TO_M.2_HAT+

€7.90

Available · 44 piece · 1-3 days

Waveshare 16-Pin PCIe zu M.2 Adapter für Raspberry Pi 5, SSD, NVMe Gen2 & Gen3, LED Statusanzeige

WS-26583

€7.90

Available · 44 piece · 1-3 days

Prices incl. VAT plus shipping costs

McPower solder, lead-free, Ø0.5mm, 100g roll

- 99.3% tin, 0.7% copper- lead-free- 0.5mm diameter- 100g on roll

€8.70

Available · 10 piece · 1-3 days

3-fach USB Ladekabel, X-mas Lichterkette mit 10 bunten Lichtern, 8-Pin / USB-C / Micro USB, 1,40m

Sie ist 1,40 m lang, sie ist hell, sie leuchtet in allen Farben - Und sie lädt deine Geräte auf! Mit unserer USB Ladegerät-Lichterkette wird es weihnachtlich im Bastelkeller. Auf einer Seite hat sie einen USB-Stecker, auf der anderen USB-C, Micro-USB und sogar einen 8-Pin-Anschluss – du kannst also Smartphone, Tablet, E-Reader, Vape und Smart Toaster saisonal aufladen. Oder du steckst dir eine Powerbank in die Tasche beginnst ein neues Leben als mobiler Weihnachtsbaum! Wir haben jede Lampe überprüft und können berichten: An dieser Lichterkette hängen 10 bunte Lichter. Die Anwendung ist denkbar einfach: Schritt 1: (Trommelwirbel bitte!) In den USB-Port einstecken Schritt 2

€3.90

Available · 73 piece · 1-3 days

3-fach USB Ladekabel, X-mas Lichterkette mit 10 bunten Lichtern, 8-Pin / USB-C / Micro USB, 1,40m

125541

€3.90

Available · 73 piece · 1-3 days

Prices incl. VAT plus shipping costs

New

7.5" 800×480 ePaper display HAT for Raspberry Pi, three-coloured (red, black, white)

Overview This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800x480 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Compatible with Raspberry Pi 2B/3B/Zero/Zero W SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications Operating voltage: 3.3V Interface: SPI Outline dimension: 170.2mm × 111.2mm Display size: 163.2mm × 97.92mm Dot pitch: 0.205 × 0.204 Resolution: 800 × 480 Display colour: red, black, white Grey level: 2 Full refresh time: 16s Refresh power: 48mW(typ.) Standby power: <0.017mW Viewing angle: >170° Interface SYMBOL DESCRIPTION VCC 3.3V GND Ground DIN PIN SPI MOSI pin CLK SPI SCK pin CS SPI chip selection, low active DC Data/Command selection (high for data, low for command) RST External reset, low active BUSY Busy status output, low active Scope of delivery 7.5inch e-Paper (B) ePaper Driver HAT RPi screws pack (2 pcs.) Documentation / Downloads https://www.waveshare.com/wiki/7.5inch_e-Paper_HAT_(B)

€59.90

Available · 6 piece · 1-3 days

New

7.5" 800×480 ePaper display HAT for Raspberry Pi, three-coloured (red, black, white)

3C-RPI-EINK75

€59.90

Available · 6 piece · 1-3 days

Prices incl. VAT plus shipping costs

Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers

Raspberry Pi Pico WH is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip.The Raspberry Pi Pico W is designed as a low-cost yet flexible development platform for the RP2040 with a 2.4 GHz wireless interface and the following key features:RP2040 microcontroller with 2 MB flash memoryIntegrated 2.4 GHz single-band wireless interface (802.11n)Micro USB-B connector for power and data (and for reprogramming the flash)40-pin 21mmx51mm 'DIP' PCB, 1mm thick, with 0.1" through-holes, also with edge decorations26 multifunctional 3.3 V general purpose inputs and outputs (GPIO) 23 GPIOs are purely digital, three of which are also ADC-capable Can be surface-mounted as a module3-pin ARM Serial Wire Debug Port (SWD)Simple but highly flexible power supply architectureVarious options for easy power supply via micro USB, external power supplies or batteries - High quality, low cost, high availabilityComprehensive SDK, software examples and documentation3-pin JTAG connector40-pin pre-soldered pin headerDetailed information about the RP2040 microcontroller can be found in the RP2040 datasheet. The most important features are:Dual-core Cortex M0+ with up to 133MHzOn-chip PLL enables variable core frequency264kByte multi-bank high performance SRAMExternal Quad SPI Flash with eXecute In Place (XIP) and 16kByte on-chip cacheHigh-performance full crossbar bus structureOn-board USB1.1 (device or host)30 multifunction I/O (four can be used for ADC)1.8-3.3 V I/O voltage12-bit 500ksps analogue-to-digital converter (ADC)Various digital peripherals2 x UART, 2 × I2C, 2 × SPI, 16 x PWM channels1 x timer with 4 alarms, 1 x real-time clock2 x programmable I/O blocks (PIO), 8 state machines in totalFlexible, user-programmable high-speed I/OCan emulate interfaces such as SD card and VGAFor more information on the Raspberry Pi Pico and how to get started, visit https://www.raspberrypi.org/documentation/pico/getting-started/.

€7.20

Available · 100+ piece · 1-3 days

Raspberry Pi Pico WH, RP2040 + WLAN microcontroller board, with headers

RPI-PICO-WH

€7.20

Available · 100+ piece · 1-3 days

Prices incl. VAT plus shipping costs

DFRobot light-seeking robot kit, for learning to solder

€13.90

Available · 24 piece · 1-3 days

DFRobot light-seeking robot kit, for learning to solder

TOY0060

€13.90

Available · 24 piece · 1-3 days

Prices incl. VAT plus shipping costs

4-piece soldering set LS-303 - consisting of 30W soldering iron, desoldering pump, soldering iron stand, soldering tin

€12.20

Available · 8 piece · 1-3 days

4-piece soldering set LS-303 - consisting of 30W soldering iron, desoldering pump, soldering iron stand, soldering tin

T1540010

€12.20

Available · 8 piece · 1-3 days

Prices incl. VAT plus shipping costs

Silicone soldering mat, 280x200mm

€4.90

Available · 78 piece · 1-3 days

Silicone soldering mat, 280x200mm

SIL-MAT-1

€4.90

Available · 78 piece · 1-3 days

Prices incl. VAT plus shipping costs

Optosupply Round Super LED, 5mm, green

€0.28

Available · 83 piece · 1-3 days

Optosupply Round Super LED, 5mm, green

LED5-G-LC

€0.28

Available · 83 piece · 1-3 days

Prices incl. VAT plus shipping costs

Optosupply Round Super LED, 5mm, yellow

Technical dataDiode typeLEDDiameter LED diode5mmLED colour diodesamberBrightness15...20mcdLight angle30°Wavelength λd585...595nmDiode lensdiffuse, yellowLED Diode current20mAMountingTHTFrontdomedOutput pitch2.54mmOperating voltage1.8...2.4V

€0.16

Currently not available

Details