€11.50
Order now and
secure 6 Berrys
secure 6 Berrys
Varianten
Available · 10 piece · 1-3 days
-
Available immediately
10 piece : 1-3 days
Wird oft zusammengekauft
Product information
Description
Product information "seeed Grove - Gas Sensor (MQ5)"
Seeed Grove - Gas Sensor (MQ5)
The Grove - Gas Sensor (MQ5) is used to detect combustible gases such as liquefied petroleum gas (LPG), natural gas or town gas and is suitable for applications in the field of gas leak detection in domestic or industrial environments. The sensor is based on the MQ5 gas detector and offers a fast response time and high sensitivity. The sensitivity can be adjusted via an integrated potentiometer.
The sensor detects various flammable gases and outputs the corresponding measured values via the Grove-compatible interface. The values can be analysed using a microcontroller or a development platform such as Arduino. The sensor is designed for stable long-term use. Stable measurement performance over a longer period of time is guaranteed by the internal design.
The module is suitable for use in safety-critical projects where rapid detection of flammable gases is required. It can be installed in room monitoring systems, gas detectors or industrial control systems. Thanks to its compact design and simple Grove interface, the sensor can be integrated directly into existing systems.
The product enables the continuous detection of gas concentrations in the air and reports increased values via the digital or analogue output interface. The adaptability of the sensitivity allows calibration to different ambient conditions or specific gas types. The electrical connection is made via the Grove port, which enables simple integration without soldering.
Features at a glance
The Grove - Gas Sensor (MQ5) is used to detect combustible gases such as liquefied petroleum gas (LPG), natural gas or town gas and is suitable for applications in the field of gas leak detection in domestic or industrial environments. The sensor is based on the MQ5 gas detector and offers a fast response time and high sensitivity. The sensitivity can be adjusted via an integrated potentiometer.
The sensor detects various flammable gases and outputs the corresponding measured values via the Grove-compatible interface. The values can be analysed using a microcontroller or a development platform such as Arduino. The sensor is designed for stable long-term use. Stable measurement performance over a longer period of time is guaranteed by the internal design.
The module is suitable for use in safety-critical projects where rapid detection of flammable gases is required. It can be installed in room monitoring systems, gas detectors or industrial control systems. Thanks to its compact design and simple Grove interface, the sensor can be integrated directly into existing systems.
The product enables the continuous detection of gas concentrations in the air and reports increased values via the digital or analogue output interface. The adaptability of the sensitivity allows calibration to different ambient conditions or specific gas types. The electrical connection is made via the Grove port, which enables simple integration without soldering.
Features at a glance
- Detection of LPG, natural gas, town gas and other combustible gases
- Fast response time for prompt processing of measured values
- Sensitivity adjustable via potentiometer
- Long service life with stable performance
- Grove interface for easy integration
- Grove-compatible microcontrollers
- Arduino and comparable platforms
- Sensor type: MQ5
- Detectable gas type: LPG, natural gas, town gas
- Interface: Grove-compatible
- Sensitivity: adjustable via potentiometer
- Hot-swapping with active power supply can damage the components
- 1x Grove gas sensor (MQ5)
- 1x Grove cable
Properties
| Zolltarifnummer: | 90230010 |
|---|---|
| Brand: | seeed |
| Country of Origin: | China |
| EAN: | 841454108337 |
| Gross Weight (kg): | 0.017 |
| Manufacturer ID: | 101020056 |
| Product ID: | SE-101020056 |
Manufacturer and safety information
Manufacturer information
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
[email protected]
WEEE number: 20453810
Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]
Safety instructions
Seeed Technology Co.,Ltd.
Tower B 1/F, Shanshui Building, NanshanYungu Innovation Industry Park, Liuxian Ave. No. 1183
CN 518055 Shenzhen
https://www.seeedstudio.com
[email protected]
WEEE number: 20453810
Person responsible for the EU
BerryBase GmbH
Bei den Mühren 70
DE 20457 Hamburg
https://www.berrybase.de
[email protected]
Safety instructions
- Use product only in well ventilated areas.
- Avoid direct contact with water or humid environments.
- Read and follow the operating instructions carefully before use.
- Use the sensor away from flammable or explosive materials.
- Ensure connection to a suitable power source in accordance with the specifications.
- In the event of damage or malfunctions, disconnect from the power supply immediately.
- Protect from heat sources and direct sunlight.
- Dispose of in accordance with local regulations for electronic devices and hazardous substances.
- Never touch gas or dust sensors directly with bare hands.
- Do not use for applications in safety-critical systems without additional protective mechanisms.
Reviews
0
Login
Skip product gallery
Ähnliche Artikel
seeed Grove - Gas Sensor (MQ2)
€7.80
Seeed Grove - Gas Sensor (MQ2)
The Grove - Gas Sensor (MQ2) is a module for detecting gas leaks in the private and industrial sectors. It detects various gases such as liquefied petroleum gas (LPG), isobutane, methane, alcohol, hydrogen and smoke. The sensor is based on the MQ2 gas detector and is characterised by a fast response time and adjustable sensitivity. This can be manually adjusted via an integrated potentiometer.
The module offers a wide detection range and is designed for stable long-term use. The Grove-compatible interface enables simple integration into existing systems without soldering. The output is via a digital or analogue interface and is compatible with common microcontroller platforms such as Arduino.
The sensor is suitable for air quality monitoring projects, gas leak detection in safety applications and for use in automated control systems. Its ability to detect various flammable gases and smoke makes it versatile. Typical areas of application include households, workshops, industrial plants and IoT systems with air quality monitoring.
The sensor reacts to increased concentrations of the gases mentioned with a change in resistance in the sensor element. This change is analysed by the microcontroller. The detection quality can be adapted to different ambient conditions by calibrating and adjusting the potentiometer. When using the device, please note that hot-swapping the Grove connection during operation can damage the electronics. The power supply should be switched off before reconnecting.
Overview of features
Detection of LPG, isobutane, methane, alcohol, hydrogen and smoke Fast response time and high sensitivity Sensitivity adjustable via potentiometer Long service life with stable performance Grove interface for easy integration
Compatibility
Grove-compatible microcontrollers Arduino and comparable platforms
Technical specifications
Sensor type: MQ2 Detectable gas type: LPG, isobutane, methane, alcohol, hydrogen, smoke Interface: Grove-compatible Sensitivity: adjustable via potentiometer
Other data
Hot-swapping with active power supply can damage the components
Scope of delivery
1x Grove gas sensor (MQ2) 1x Grove cable
Links
Instructions: Selecting a gas sensor Wikipedia: Flammability limits Eagle files (ZIP) Circuit diagram (PDF) Data sheet MQ2 (PDF)
Available · 9 piece · 1-3 days
seeed Grove - Gas Sensor (MQ9)
€9.50
Seeed Grove - Gas Sensor (MQ9)
The Grove - Gas Sensor (MQ9) is a module for detecting gas leaks and is used to detect various combustible gases. These include liquefied petroleum gas (LPG), isobutane, methane, alcohol, hydrogen, carbon monoxide, town gas and smoke. The sensor is based on the MQ9 gas detector and offers high sensitivity over a wide measuring range. The detection accuracy can be adjusted via an integrated potentiometer.
Thanks to its fast response time, the module enables rapid reactions to changing gas concentrations. It can be used for gas monitoring in various scenarios such as households, industrial plants or safety-relevant systems. Stable performance over a long period of time is supported by the robust design and simple circuitry.
The module detects carbon monoxide in a range of 10 to 1000 ppm as well as other combustible gases in a range of 100 to 10000 ppm. It is equipped with a Grove interface, which simplifies integration into microcontroller systems such as Arduino. The sensor's versatility makes it suitable for air quality monitoring systems, safety alarms and automation solutions.
Signal processing is based on the change in electrical resistance in the sensor element on contact with gases. Calibration to specific ambient conditions is performed manually via the potentiometer. During use, care must be taken to ensure that the Grove connection is only reconnected when the power supply is switched off to prevent damage to the electronics.
Overview of features
Detection of LPG, isobutane, methane, alcohol, hydrogen, carbon monoxide, town gas, smoke Fast response time for gas detection Sensitivity adjustable via potentiometer Wide measuring range: 10-1000 ppm CO, 100-10000 ppm combustible gases Long service life and stable function Grove interface for easy integration
Compatibility
Grove-compatible microcontrollers Arduino and comparable platforms
Technical specifications
Sensor type: MQ9 Detectable gas type: LPG, isobutane, methane, alcohol, hydrogen, carbon monoxide, town gas, smoke Measuring range CO: 10-1000 ppm Measuring range combustible gases: 100-10000 ppm Interface: Grove-compatible Sensitivity: adjustable via potentiometer
Other data
Hot-swapping with active power supply can lead to damage
Scope of delivery
Grove - Gas Sensor (MQ9) Grove cable
Links to
Wikipedia: Flammability limits Eagle files (ZIP) Circuit diagram (PDF) Data sheet MQ9 (PDF)
Currently not available
Skip product gallery
Cutsomers also bought
seeed Grove - Gas Sensor (MQ2)
€7.80
Seeed Grove - Gas Sensor (MQ2)
The Grove - Gas Sensor (MQ2) is a module for detecting gas leaks in the private and industrial sectors. It detects various gases such as liquefied petroleum gas (LPG), isobutane, methane, alcohol, hydrogen and smoke. The sensor is based on the MQ2 gas detector and is characterised by a fast response time and adjustable sensitivity. This can be manually adjusted via an integrated potentiometer.
The module offers a wide detection range and is designed for stable long-term use. The Grove-compatible interface enables simple integration into existing systems without soldering. The output is via a digital or analogue interface and is compatible with common microcontroller platforms such as Arduino.
The sensor is suitable for air quality monitoring projects, gas leak detection in safety applications and for use in automated control systems. Its ability to detect various flammable gases and smoke makes it versatile. Typical areas of application include households, workshops, industrial plants and IoT systems with air quality monitoring.
The sensor reacts to increased concentrations of the gases mentioned with a change in resistance in the sensor element. This change is analysed by the microcontroller. The detection quality can be adapted to different ambient conditions by calibrating and adjusting the potentiometer. When using the device, please note that hot-swapping the Grove connection during operation can damage the electronics. The power supply should be switched off before reconnecting.
Overview of features
Detection of LPG, isobutane, methane, alcohol, hydrogen and smoke Fast response time and high sensitivity Sensitivity adjustable via potentiometer Long service life with stable performance Grove interface for easy integration
Compatibility
Grove-compatible microcontrollers Arduino and comparable platforms
Technical specifications
Sensor type: MQ2 Detectable gas type: LPG, isobutane, methane, alcohol, hydrogen, smoke Interface: Grove-compatible Sensitivity: adjustable via potentiometer
Other data
Hot-swapping with active power supply can damage the components
Scope of delivery
1x Grove gas sensor (MQ2) 1x Grove cable
Links
Instructions: Selecting a gas sensor Wikipedia: Flammability limits Eagle files (ZIP) Circuit diagram (PDF) Data sheet MQ2 (PDF)
Available · 9 piece · 1-3 days
MQ-135 gas sensor with analogue and digital output
€2.80
Sensor for measuring the concentration of benzon, alcohol, smoke in the air, e.g. for detecting gas leaks. (gas alarm) or for measuring air quality. The threshold value above which the module responds can be set via a potentiometer.
Please note that the sensor is heated up and operated warm. Accurate measurement results are only provided when the sensor is warm.
Technical data:
- Measuring range gas concentration: approx. 10 - 10.000ppm
- Input voltage (VCC) : 5V- GND: Ground connection
- AOUT: Analogue output (0.1 - 0.3V up to max. 4V at maximum concentration)
- DOUT: Digital output (1/0 0.1V/5V)
- Dimensions: approx. 32 x 22mm x 27 mm
Available · 100+ piece · 1-3 days
seeed Grove - Soil moisture sensor
€3.20
Grove - Soil Moisture Sensor
The Grove - Soil Moisture Sensor effectively measures soil moisture and is ideal for gardening applications such as deciding whether plants need to be watered or automating the watering of plants. This sensor offers a low-cost, simple plug-and-play solution that is particularly suitable for students, makers and IoT developers. Two probes, which allow current to flow through the soil, determine resistance values that indicate the moisture content. As the sensor is not hardened against dirt or water exposure to the control circuit, it is only recommended for prototyping.
Features at a glance
Cost-effective: Ideal for students, hobbyists and IoT developers for DIY and prototyping.
Plug-and-play: Grove-compatible interface (data transmission) and two large pads serve as probes (data acquisition)
Effective measurement: Based on soil resistivity measurement, where high moisture means lower resistance and vice versa.
Technical specifications
Dimensions: 60 mm x 20 mm x 6.35 mm
Weight: G.W 10g
Battery: Not included
Operating voltage: 3.3 ~ 5V
Operating current: 35mA
Sensor output value in dry soil: 0 ~ 300
Sensor output value in moist soil: 300 ~ 700
Sensor output value in water: 700 ~ 950
PCB size: 2.0 cm X 6.0 cm
Scope of delivery
1x Grove moisture sensor
1x Grove cable
Available · 15 piece · 1-3 days
IIC / I2C interface for 1602 / 2004 displays
€1.30
This module can be used to control a 1602 or 2004 display via I2C. The module is simply soldered behind the display.
Technical data:
Supply voltage: 2.5 - 6VSupports the I2C protocolBacklight can be deactivated using a jumperContrast adjustable via potentiometerSelectable I2C address - up to eight modules can be cascaded.Dimensions: approx. 41.5 x 19 x 15.3 mm
Available · 100+ piece · 1-3 days
Alphanumeric LCD 16x2, blue / white
€1.95
1602 LCD display blue / white with HD44780 compatible chipset Technical features
Screen format: 16 x 2 characters
Colour: white text on blue backlight
Controller: HD44780 compatible chipset
Version with ASCII + Japanese character set (picture 3)
Power supply (type): 5.0V
Interface: 6800 4-bit parallel, 6800 8-bit parallel
Dimensions: approx. 80 x 35 x 11 mm
Available · 96 piece · 1-3 days
SG92R Micro Servo
€2.80
SG92R Micro Servo
Discover the versatile possibilities of the SG92R Micro Servo for your projects! This compact and robust device offers you the precision you need to turn your ideas into reality. With an operating voltage of 4.2 to 6V and an operating temperature of 0 to 55 C°, this servo is particularly resistant to environmental influences. The small dimensions of 23 x 13 x 27 mm allow it to be used in even the smallest models, making it ideal for demanding designs.
Features at a glance
Versatility: Suitable for various modelling projects.
Compact: Small dimensions allow use in confined spaces.
Robustness: Developed for a temperature range of 0 - 55 C°.
Technical data
Operating voltage: 4.2 - 6V
Temperature range: 0 - 55 C°
3 pin cable length: approx. 25cm
Dimensions: 23 x 13 x 27 mm
Scope of delivery
1x
SG92R
Micro servo
3x servo attachments
4x different screws
Available · 100+ piece · 1-3 days
Male connector, 2x 40-pin, RM 2.54, straight
€0.50
Male connector, 2x 40-pin, RM 2.54, straight
The male connector, each with 40 pins in two rows and a standard pitch of 2.54 mm, provides a reliable connection for your electronics projects. The separability after each pair of pins enables flexible customisation. Ideal for easy integration and flexible customisation.
Features at a glance
Two rows of 40 pins each for versatile useStandard pitch of 2.54 mm for easy integrationTotal height of approx. 11 mm for compact designSeparability after each pin pair for flexible customisation
Technical data
Pin rows: 2x 40
Pin spacing (pitch): 2.54 mm
Pin height: 3 / 6 mm
Total height: approx. 11 mm
Separability: After each pin pair
Scope of delivery
1 x pin header, 2x 40-pin, RM 2.54, straight
Available · 100+ piece · 1-3 days
Alphanumeric LCD 20x4, blue / white
€5.45
2004 LCD display blue / white with HD44780 compatible chipset- 4 lines with 20 characters each- Version with ASCII + Japanese character set (Fig. 3)Using a standard 16-pin interface, wherein:Pin 1: VSS to powerPin 2: VDD connected to 5V positive power supplyPin 3: V0 LCD display contrast adjustment terminal, connected to the positive power supply weakest contrast, grounded power contrast, the contrast is too high will produce "ghosting", when used by a 10K potentiometer to adjust the contrastPin 4: RS for register selection, the selection of high data registers, instruction register is low.Pin 5: R / W for read and write signal line, high read, low write operation. When the RS and RW is low can be written instructions or display the address can be read, when RS is low RW is high busy signal, data can be written when RS is high RW is lowPin 6: E end to enable end, When E Duanyou high jump becomes low, the LCD module execute the command.Pin 7 - 14: D0 to D7 for 8-bit bidirectional data line.Pin 15: Backlight positive power supplyPin 16: Backlight negative power supply
Available · 12 piece · 1-3 days
Makeblock mBuild MQ2 smoke and gas sensor, gas detection, mBuild compatibility, 160mA,
€10.95
Makeblock mBuild MQ2 smoke and gas sensor
The mBuild MQ2 sensor from Makeblock reliably detects various gases and smoke in the ambient air. It is particularly suitable for educational purposes in the field of environmental and safety technology. The sensor measures liquid gas, butane, propane, methane, alcohol and hydrogen, among others. The sensor requires a short preheating phase of around 5 minutes for precise detection.
Features at a glance
Detection of smoke and various gases
Fast integration into mBuild systems
Preheating time for improved accuracy
Compatibility
mBuild systems
CyberPi, mBot2 incl. shield
Typical combinations
CyberPi - control centre for projects with air quality monitoring
mBuild extension module - for branching in daisy chain networks
mBuild cable sets - e.g. 10 cm or 20 cm for data and power connection
Technical specifications
Dimensions: 24 x 36 x 22 mm
Weight: 10 g
Operating current: 160 mA
Heating impedance: 33″
Preheating energy consumption: < 800 mW
RoHS compliant
Connections
2x 4-pin mBuild ports (plug-and-play)
Scope of delivery
1x MQ2 smoke and gas sensor module
mBlock IDE
Simple programming with blocks and Python
The mBlock IDE is a web-based programming environment that is based on Scratch 3.0 and was specially developed for the education sector. It enables block-based programming for beginners and text-based coding with Python for advanced users.
Intuitive drag-and-drop interface with visual programming blocks
Direct switch to Python mode for advanced users
Supports various hardware such as mBot, CyberPi, Arduino, micro:bit
Integration of AI and IoT functions such as image recognition or cloud data
Can be used across platforms in the browser or as a desktop app
Try it out directly
https://ide.mblock.cc/
Downloads
https://mblock.cc/pages/downloads
Available · 97 piece · 1-3 days
Skip product gallery
More Products from +++ seeed +++ to look at
seeed Acryl-Seitenpaneele für NVIDIA Jetson Nano, re_computer Gehäuse, 1mm, Abstandshalter, schwarz
€2.50
Available · 8 piece · 1-3 days
Seeed Crazyflie AI-deck V1.1, GAP8 RISC-V MCU, ESP32 WiFi, UART, ML, for drones, 5V
€189.90
Available · 4 piece · 1-3 days
seeed Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
€68.80
Currently not available
seeed Grove - 2.13" ePaper / E-Ink display, three-coloured (red / black / white)
€21.20
Currently not available
%
seeed Grove - 3-axis analogue accelerometer ±20g, ADXL356B
€70.90
€79.00
(10.25% saved)
Currently not available
%
seeed Grove - 3-Axis Analogue Accelerometer ±40g (ADXL356C)
€70.90
€80.90
(12.36% saved)
Available · 2 piece · 1-3 days
seeed Grove - 3-Axis Digital Accelerometer ±16g, Ultra-low Power (BMA400)
€9.10
Available · 3 piece · 1-3 days
seeed Grove - 3-in-1 CO2, Temperature & Humidity Sensor (SCD30)
€56.90
Available · 1 piece · 1-3 days
